[PATCH v2 3/5] ARM: dts: ti: cpcap-mapphone: use charger detection interrupt for CPCAP USB PHY

[Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>]

Update the CPCAP USB PHY interrupt mapping to use the charger
detection interrupt and corresponding "chrg_det" interrupt name.

This matches the driver and binding updates for DCP detection.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
---
 arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi
index 6b1195c2a768..51a858021541 100644
--- a/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-cpcap-mapphone.dtsi
@@ -125,11 +125,13 @@ cpcap_usb2_phy: phy {
 			interrupts-extended =
 				<&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>,
 				<&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>,
-				<&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>;
+				<&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>,
+				<&cpcap 13 0>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn",
 				"vbusvld", "sessvld", "sessend",
-				"se1", "dm", "dp";
+				"se1", "dm", "dp",
+				"chrg_det";
 			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
 				     <&gpio1 0 GPIO_ACTIVE_HIGH>;
 			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
-- 
2.39.5