[PATCH v2 1/5] dt-bindings: hwmon: (pmbus/max20830): add enable-gpios property and complete examples

[Alexis Czezar Torreno <alexisczezar.torreno@analog.com>]

Adding an entry for the MAX20830 EN (enable) pin. This pin exist but
was not included before. Also edited examples entry to be more complete.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 .../devicetree/bindings/hwmon/pmbus/adi,max20830.yaml         | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
index 1625dd59417f1b3ca689a9c86ca266da913d1217..f3ba6351aa5d657590d92a538910fd6b787e7a3a 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max20830.yaml
@@ -39,6 +39,11 @@ properties:
     description:
       Optional 2.5V to 5.5V LDO input supply.
 
+  enable-gpios:
+    description:
+      GPIO connected to the EN (enable) pin.
+    maxItems: 1
+
   pwr-good-gpios:
     description:
       GPIO connected to the power-good status output pin.
@@ -53,6 +58,8 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -61,6 +68,10 @@ examples:
             compatible = "adi,max20830";
             reg = <0x30>;
             vddh-supply = <&vddh>;
+            avdd-supply = <&avdd>;
+            ldoin-supply = <&ldoin>;
+            enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+            pwr-good-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
         };
     };
 ...

-- 
2.34.1