From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from www537.your-server.de (www537.your-server.de [188.40.3.216]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5B3EE390C9F; Tue, 7 Jul 2026 09:14:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=188.40.3.216 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1783415679; cv=none; b=KzbxQ7d3y1BunpkIWCLlwZLfZgstFT7PZzaPrD1aXXdUZV17j8UdUNYcbbPsYd6o2x2RzwzNbVif1hRxmXlFqqUp296m35GKAozdg+ICYSBTeU3uXaBQXauWvC5ITkBPTvJfh7cTuSjNbXEUGSrOSnfUG4qFvL6Q+eynhK/VcJg= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1783415679; c=relaxed/simple; bh=72G8MceY5GaoEIs08DjCfWCRMutj1PQTjGOu0zeEJSQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=QFd+iBDsQ98UbupkUHgD1o1Qj0fA8fE+/wViD9Bnez0In3ZXxK4MivwA+uNkxyPGn1UnKVRmaC8gfdKXwRvyDFPH4QlNGxS8RreACg7/yM+gVj/BdktHLSMGMb8KQg/LxRhIs6pTRBizBzeHVCf80T6fb6gtBF1A4+bmAS/gsmA= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ew.tq-group.com; spf=pass smtp.mailfrom=ew.tq-group.com; dkim=pass (2048-bit key) header.d=ew.tq-group.com header.i=@ew.tq-group.com header.b=pyQZMLdU; arc=none smtp.client-ip=188.40.3.216 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ew.tq-group.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ew.tq-group.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=ew.tq-group.com header.i=@ew.tq-group.com header.b="pyQZMLdU" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=ew.tq-group.com; s=default2602; h=Content-Transfer-Encoding:MIME-Version: References:In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To: Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID; bh=rvFDUiZGBYz3aB9v+/8qgG21t2gJnWCyqaExN7KHMxo=; b=pyQZMLdUJg8065MreCEQNEeUId opUBlads1n0Y1BspLjYmYE8XjJ6W9Rt4S0LcThkjjHDfhwV+V7/RocICSif7hGtmL0R0tQivzd4IG aIUBJzcVIp49WObHuwesQRrrPFb4VL/LxrIs41a2ibss6fg5jxIhvnh628OhSzu2n0I7qW2NP2fx2 xu4c/Qa+ZMLslCpTNuZRZGtAuHrrk1g4l0Wc/3lAW47+R5i172F6rZ2g1lN82JKaFTN9JQxLLRqQH CaRaR8F++231Mfk31ytsX+c4CXEcQtkaNDtP7A6RtjxH0pcGlmvr7CX9FErueeIiiPftafwAoFJua LHgeCOGA==; Received: from sslproxy03.your-server.de ([88.198.220.132]) by www537.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.96.2) (envelope-from ) id 1wh1sr-000JqG-22; Tue, 07 Jul 2026 11:14:29 +0200 Received: from localhost ([127.0.0.1]) by sslproxy03.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1wh1sq-000LtS-2R; Tue, 07 Jul 2026 11:14:29 +0200 From: Alexander Stein To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Frank Li , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Shawn Guo Cc: Markus Niebel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux@ew.tq-group.com, Alexander Stein Subject: [PATCH 2/2] arm64: dts: add devicetree for TQMa91xx on MBa93xxCA Date: Tue, 7 Jul 2026 11:14:20 +0200 Message-ID: <20260707091424.1702245-3-alexander.stein@ew.tq-group.com> X-Mailer: git-send-email 2.54.0 In-Reply-To: <20260707091424.1702245-1-alexander.stein@ew.tq-group.com> References: <20260707091424.1702245-1-alexander.stein@ew.tq-group.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Virus-Scanned: Clear (ClamAV 1.4.3/28053/Tue Jul 7 08:24:37 2026) From: Markus Niebel This allows using TQMa91xxCA / TQMa91xxLA SoM on MBa93xxCA starter kit. While not having display all other interfaces of this mainboard can be used. Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx91-tqma9131-mba93xxca.dts | 937 ++++++++++++++++++ 2 files changed, 938 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 778aca2bef5dd..252a2d09f6a2c 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -580,6 +580,7 @@ imx91-phyboard-segin-peb-av-18-dtbs += imx91-phyboard-segin.dtb imx91-phyboard-s dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin-peb-av-18.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb +dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba93xxca.dtb imx91-tqma9131-mba91xxca-lvds-tm070jvhg33-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-lvds-tm070jvhg33.dtbo imx91-tqma9131-mba91xxca-rgb-cdtech-dc44-dtbs := imx91-tqma9131-mba91xxca.dtb imx93-tqma9352-mba91xxca-rgb-cdtech-dc44.dtbo diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts new file mode 100644 index 0000000000000..7feaa53665497 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba93xxca.dts @@ -0,0 +1,937 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2026 TQ-Systems GmbH , + * D-82229 Seefeld, Germany. + * Author: Markus Niebel + * Author: Alexander Stein + */ +/dts-v1/; + +#include +#include +#include +#include + +#include "imx91-tqma9131.dtsi" + +/{ + model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa93xxCA starter kit"; + compatible = "tq,imx91-tqma9131-mba93xxca", + "tq,imx91-tqma9131", "fsl,imx91"; + chassis-type = "embedded"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + eeprom0 = &eeprom0; + ethernet0 = &eqos; + ethernet1 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &pcf85063; + rtc1 = &bbnsm_rtc; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial5 = &lpuart6; + serial7 = &lpuart8; + }; + + clk_dp: clk-dp { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + status = "disabled"; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwmfan>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-a { + label = "switcha"; + linux,code = ; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-b { + label = "switchb"; + linux,code = ; + gpios = <&expander0 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&expander2 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander2 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "V_5V0_MB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_12v0>; + }; + + thermal-zones { + cpu-thermal { + trips { + cpu_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + cpu_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&cpu_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&cpu_active2>; + cooling-device = <&fan0 3 3>; + }; + }; + }; + }; +}; + +&adc1 { + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_eqos>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy_eqos: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_phy>; + reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_fec>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; + + ethphy_fec: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + /* 00 */ "", "", "USB_C_ALERT#", "PMIC_IRQ#", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "BM2_TEMP_EVENT_MOD#", + /* 12 */ "PEX_INT#", "", "RTC_EVENT#", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "", "", ""; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>; + + gpio-line-names = + /* 00 */ "SPI6_PCS0#", "", "", "", + /* 04 */ "", "", "", "SPI_CS#", + /* 08 */ "", "FAN_RPM", "MIPI_CSI_TRIGGER", "MIPI_CSI_SYNC", + /* 12 */ "", "", "", "", + /* 16 */ "X1_11", "X1_21", "X1_17", "X1_13", + /* 20 */ "X1_15", "X1_9", "", "", + /* 24 */ "", "", "X1_7", "", + /* 28 */ "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* 00 */ "SD2_CD#", "", "", "", + /* 04 */ "", "", "", "SD2_RST#", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "ENET1_INT#", "ENET2_INT#", + /* 28 */ "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + /* 00 */ "", "", "", "", + /* 04 */ "", "", "", "", + /* 08 */ "", "", "", "", + /* 12 */ "", "", "", "", + /* 16 */ "", "", "", "", + /* 20 */ "", "", "", "", + /* 24 */ "", "", "", "", + /* 28 */ "", "DP_INT", "", ""; +}; + +&lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3>; + status = "okay"; + + temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + ptn5110: usb-typec@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + label = "X17"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + typec-power-opmode = "default"; + pd-disable; + self-powered; + + port { + typec_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + }; + }; + + eeprom2: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_3v3>; + }; + + expander0: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pexp_irq>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <®_3v3>; + gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#", + "MPCIE_1V5_EN", "MPCIE_3V3_EN", + "MPCIE_PERST#", "MPCIE_WDISABLE#", + "BUTTON_A#", "BUTTON_B#"; + + mpcie-wake-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "MPCIE_WAKE#"; + }; + + /* + * Controls the mPCIE slot reset which is low active as + * reset signal. The output-low states, the signal is + * inactive, e.g. not in reset + */ + mpcie_rst_hog: mpcie-rst-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_PERST#"; + }; + + /* + * Controls the mPCIE slot WDISABLE pin which is low active + * as disable signal. The output-low states, the signal is + * inactive, e.g. not disabled + */ + mpcie_wdisable_hog: mpcie-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_WDISABLE#"; + }; + }; + + expander1: gpio@71 { + compatible = "nxp,pca9538"; + reg = <0x71>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "ENET1_RESET#", "ENET2_RESET#", + "USB_RESET#", "", + "WLAN_PD#", "WLAN_W_DISABLE#", + "WLAN_PERST#", "12V_EN"; + + /* + * Controls the WiFi card's low-active power down pin. + * The output-low states, the signal is inactive, + * resulting in high signal at power-down pin + */ + wlan-pd-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-low; + line-name = "WLAN_PD#"; + }; + + /* + * Controls the WiFi card's low-active disable pin. + * The output-low states, the signal is inactive, + * resulting in high signal at power-down pin + */ + wlan-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-low; + line-name = "WLAN_W_DISABLE#"; + }; + + /* + * Controls the WiFi card's reset pin. + * The output-low states, the signal is inactive, + * resulting in high signal at power-down pin + */ + wlan-perst-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + output-low; + line-name = "WLAN_PERST#"; + }; + }; + + expander2: gpio@72 { + compatible = "nxp,pca9538"; + reg = <0x72>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "LCD_RESET#", "LCD_PWR_EN", + "LCD_BLT_EN", "DP_EN", + "MIPI_CSI_EN", "MIPI_CSI_RST#", + "USER_LED1", "USER_LED2"; + }; +}; + +&lpi2c5 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5>; + status = "okay"; + + dp_bridge: dp-bridge@f { + compatible = "toshiba,tc9595", "toshiba,tc358767"; + reg = <0x0f>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tc9595>; + clock-names = "ref"; + clocks = <&clk_dp>; + reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + toshiba,hpd-pin = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dp_dsi_in: endpoint { + data-lanes = <1 2 3 4>; + }; + }; + }; + }; +}; + +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_lpspi6_cs>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&lpuart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + status = "okay"; +}; + +&pcf85063 { + /* RTC_EVENT# from SoM is connected on mainboard */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf85063>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; +}; + +&se97_som { + /* TEMP_EVENT# from SoM is connected on mainboard */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_temp_sensor_som>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + +/* on LVDS connector, not usable */ +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm5>; +}; + +&tpm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm6>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + typec_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb424,2517"; + reg = <1>; + reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>; + vdd-supply = <®_3v3>; + }; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-sdio; + no-mmc; + disable-wp; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX91_PAD_ENET1_MDC__ENET1_MDC 0x51e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x1000 + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x1000 + MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x1000 + MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x1000 + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC 0x1400 + /* PD | FSEL_2 | DSE X4 */ + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x51e + MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e + MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e + >; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = < + /* HYS | FSEL_0 | DSE no drive */ + MX91_PAD_CCM_CLKO1__GPIO3_IO26 0x1000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX91_PAD_ENET2_MDC__ENET2_MDC 0x51e + /* SION | HYS | FSEL_2 | DSE X4 */ + MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x4000111e + /* HYS | FSEL_0 | DSE no drive */ + MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x1000 + MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x1000 + MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2 0x1000 + MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3 0x1000 + MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x1000 + /* HYS | PD | FSEL_0 | DSE no drive */ + MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC 0x1400 + /* PD | FSEL_2 | DSE X4 */ + MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x51e + MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x51e + MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2 0x51e + MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3 0x51e + MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC 0x58e + >; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = < + /* HYS | FSEL_0 | DSE no drive */ + MX91_PAD_CCM_CLKO2__GPIO3_IO27 0x1000 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + /* HYS | PU | FSEL_0 | DSE no drive */ + MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX91_PAD_PDM_CLK__CAN1_TX 0x039e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + /* HYS | PU | FSEL_0 | DSE no drive */ + MX91_PAD_GPIO_IO27__CAN2_RX 0x1200 + /* PU | FSEL_3 | DSE X4 */ + MX91_PAD_GPIO_IO25__CAN2_TX 0x039e + >; + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = < + /* HYS | PD | FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO16__GPIO2_IO16 0x151e + MX91_PAD_GPIO_IO17__GPIO2_IO17 0x151e + MX91_PAD_GPIO_IO18__GPIO2_IO18 0x151e + MX91_PAD_GPIO_IO19__GPIO2_IO19 0x151e + MX91_PAD_GPIO_IO20__GPIO2_IO20 0x151e + MX91_PAD_GPIO_IO21__GPIO2_IO21 0x151e + MX91_PAD_GPIO_IO26__GPIO2_IO26 0x151e + >; + }; + + pinctrl_jtag: jtaggrp { + fsl,pins = < + MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x051e + MX91_PAD_DAP_TDI__JTAG_MUX_TDI 0x1200 + MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x031e + MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x1200 + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x4000199e + MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x4000199e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + /* SION | HYS | OD | FSEL_3 | DSE X4 */ + MX91_PAD_GPIO_IO22__LPI2C5_SDA 0x4000199e + MX91_PAD_GPIO_IO23__LPI2C5_SCL 0x4000199e + >; + }; + + pinctrl_lpspi6: lpspi6grp { + fsl,pins = < + /* HYS | PD | FSEL_0 | DSE no drive */ + MX91_PAD_GPIO_IO01__LPSPI6_SIN 0x1400 + /* PD | FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO02__LPSPI6_SOUT 0x051e + MX91_PAD_GPIO_IO03__LPSPI6_SCK 0x051e + >; + }; + + pinctrl_lpspi6_cs: lpspi6csgrp { + fsl,pins = < + /* FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO00__GPIO2_IO0 0x011e + MX91_PAD_GPIO_IO07__GPIO2_IO7 0x011e + >; + }; + + pinctrl_mipi_csi: mipicsigrp { + fsl,pins = < + MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x051e /* MCLK */ + MX91_PAD_GPIO_IO10__GPIO2_IO10 0x051e /* TRIGGER */ + MX91_PAD_GPIO_IO11__GPIO2_IO11 0x1400 /* SYNC */ + >; + }; + + pinctrl_pcf85063: pcf85063grp { + fsl,pins = < + MX91_PAD_SAI1_RXD0__GPIO1_IO14 0x1000 + >; + }; + + pinctrl_pexp_irq: pexpirqgrp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_SAI1_TXC__GPIO1_IO12 0x1000 + >; + }; + + pinctrl_pwmfan: pwmfangrp { + fsl,pins = < + /* HYS | PU | FSEL_0 | no DSE */ + MX91_PAD_GPIO_IO09__GPIO2_IO9 0x1200 + >; + }; + + pinctrl_tc9595: tc9595-grp { + fsl,pins = < + /* HYS | PD | FSEL_0 | no DSE */ + MX91_PAD_CCM_CLKO4__GPIO4_IO29 0x1400 + >; + }; + + pinctrl_temp_sensor_som: tempsensorsomgrp { + fsl,pins = < + /* HYS | FSEL_0 | no DSE */ + MX91_PAD_SAI1_TXFS__GPIO1_IO11 0x1000 + >; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = < + MX91_PAD_GPIO_IO06__TPM5_CH0 0x57e + >; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = < + MX91_PAD_GPIO_IO08__TPM6_CH0 0x57e + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_I2C2_SCL__GPIO1_IO2 0x1000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_UART1_RXD__LPUART1_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX91_PAD_UART1_TXD__LPUART1_TX 0x011e + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_UART2_RXD__LPUART2_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX91_PAD_UART2_TXD__LPUART2_TX 0x011e + /* FSEL_2 | DSE X4 */ + MX91_PAD_SAI1_TXD0__LPUART2_RTS_B 0x011e + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_GPIO_IO15__LPUART3_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO14__LPUART3_TX 0x011e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_GPIO_IO05__LPUART6_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO04__LPUART6_TX 0x011e + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_GPIO_IO13__LPUART8_RX 0x1000 + /* FSEL_2 | DSE X4 */ + MX91_PAD_GPIO_IO12__LPUART8_TX 0x011e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + /* HYS | FSEL_0 | No DSE */ + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x1000 + >; + }; + + /* enable SION for data and cmd pad due to ERR052021 */ + pinctrl_usdhc2_hs: usdhc2hsgrp { + fsl,pins = < + /* PD | FSEL_3 | DSE X5 */ + MX91_PAD_SD2_CLK__USDHC2_CLK 0x05be + /* HYS | PU | FSEL_3 | DSE X4 */ + MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + /* HYS | PU | FSEL_3 | DSE X3 */ + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e + /* FSEL_2 | DSE X3 */ + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e + >; + }; + + /* enable SION for data and cmd pad due to ERR052021 */ + pinctrl_usdhc2_uhs: usdhc2uhsgrp { + fsl,pins = < + /* PD | FSEL_3 | DSE X6 */ + MX91_PAD_SD2_CLK__USDHC2_CLK 0x05fe + /* HYS | PU | FSEL_3 | DSE X4 */ + MX91_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + /* FSEL_2 | DSE X3 */ + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x010e + >; + }; +}; -- 2.54.0