[PATCH v7 3/7] iio: dac: ad5686: introduce sync operation

[Rodrigo Alencar via B4 Relay <devnull+rodrigo.alencar.analog.com@kernel.org>]

From: Rodrigo Alencar <rodrigo.alencar@analog.com>

Add sync() to operation to ad5686_bus_ops, which can be used to flush
multiple pending data transfers at once. This is going to be used when
implementing triggered buffer support.

Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
---
 drivers/iio/dac/ad5686.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h
index 32cb3931413c..ae9aeda2d201 100644
--- a/drivers/iio/dac/ad5686.h
+++ b/drivers/iio/dac/ad5686.h
@@ -70,10 +70,12 @@ struct ad5686_state;
  * struct ad5686_bus_ops - bus specific read/write operations
  * @read: read a register value at the given address
  * @write: write a command, address and value to the device
+ * @sync: ensure the completion of the write operation (optional)
  */
 struct ad5686_bus_ops {
 	int (*read)(struct ad5686_state *st, u8 addr);
 	int (*write)(struct ad5686_state *st, u8 cmd, u8 addr, u16 val);
+	int (*sync)(struct ad5686_state *st);
 };
 
 /**
@@ -162,7 +164,13 @@ int ad5686_probe(struct device *dev,
 
 static inline int ad5686_write(struct ad5686_state *st, u8 cmd, u8 addr, u16 val)
 {
-	return st->ops->write(st, cmd, addr, val);
+	int ret;
+
+	ret = st->ops->write(st, cmd, addr, val);
+	if (ret)
+		return ret;
+
+	return st->ops->sync ? st->ops->sync(st) : 0;
 }
 
 static inline int ad5686_read(struct ad5686_state *st, u8 addr)

-- 
2.43.0