On Fri, Jul 10, 2026 at 04:24:59PM +0800, Binbin Zhou wrote:
> Add a new compatible string `loongson,ls2k0300-thermal` for the thermal
> sensor found on the Loongson-2K0300 SoC.
> 
> The hardware differs from the existing SoCs in its register layout: it
> requires two register regions (one for the thermal sensor control and
> another for the CPU ID).
> 
> Update the binding to describe this new requirement.
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> ---
>  .../thermal/loongson,ls2k-thermal.yaml        | 68 ++++++++++++++-----
>  1 file changed, 50 insertions(+), 18 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
> index 79e691b08341..b5cbfd201105 100644
> --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
> @@ -10,13 +10,11 @@ maintainers:
>    - zhanghongchen <zhanghongchen@loongson.cn>
>    - Yinbo Zhu <zhuyinbo@loongson.cn>
>  
> -allOf:
> -  - $ref: /schemas/thermal/thermal-sensor.yaml#
> -
>  properties:
>    compatible:
>      oneOf:
>        - enum:
> +          - loongson,ls2k0300-thermal
>            - loongson,ls2k1000-thermal
>            - loongson,ls2k2000-thermal
>        - items:
> @@ -39,23 +37,46 @@ required:
>    - reg
>    - interrupts
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        enum:
> -          - loongson,ls2k2000-thermal
> +allOf:
> +  - $ref: /schemas/thermal/thermal-sensor.yaml#
>  
> -then:
> -  properties:
> -    reg:
> -      minItems: 2
> -      maxItems: 2
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - loongson,ls2k0300-thermal
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Thermal base register region
> +            - description: CPU ID register region
>  
> -else:
> -  properties:
> -    reg:
> -      maxItems: 1
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - loongson,ls2k1000-thermal
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Thermal base register region
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - loongson,ls2k2000-thermal
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Thermal base register region
> +            - description: Thermal data output register region
>  
>  unevaluatedProperties: false
>  
> @@ -69,3 +90,14 @@ examples:
>          interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
>          #thermal-sensor-cells = <1>;
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    thermal-sensor@16001500 {
> +       compatible = "loongson,ls2k0300-thermal";
> +       reg = <0x16001500 0x30>,
> +             <0x16003ff0 0x8>;

Quite frankly, the address and size of this look like the second
register region here is actually a few bytes in a syscon that is being
misrepresented.
What lies at the addresses immediately before and after 0x16003ff0?


Thanks,
Conor.

> +       interrupt-parent = <&liointc1>;
> +       interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
> +       #thermal-sensor-cells = <1>;
> +    };
> -- 
> 2.52.0
>