From: Loic Poulain <loic.poulain@oss.qualcomm.com>
To: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Loic Poulain <loic.poulain@oss.qualcomm.com>
Subject: [PATCH v5 3/4] leds: pca963x: add multicolor LED class support
Date: Fri, 10 Jul 2026 15:49:43 +0200 [thread overview]
Message-ID: <20260710-monza-leds-v5-3-a8972d28c28f@oss.qualcomm.com> (raw)
In-Reply-To: <20260710-monza-leds-v5-0-a8972d28c28f@oss.qualcomm.com>
Allow grouping of individual PCA963x PWM channels into a single
multicolor LED device by adding support for the LED multicolor class.
A child node with sub-children is treated as a multicolor group,
others are treated as single leds, keeping full backwards compatibility.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
drivers/leds/Kconfig | 1 +
drivers/leds/leds-pca963x.c | 160 ++++++++++++++++++++++++++++++++++----------
2 files changed, 126 insertions(+), 35 deletions(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index f4a0a3c8c8705e0f10ba26584277dbb2d5eac5b5..14df88f92b12bbe43908b67f9480cf23056e27e2 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -596,6 +596,7 @@ config LEDS_PCA963X
tristate "LED support for PCA963x I2C chip"
depends on LEDS_CLASS
depends on I2C
+ select LEDS_CLASS_MULTICOLOR
help
This option enables support for LEDs connected to the PCA963x
LED driver chip accessed via the I2C bus. Supported
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index e3a81c60ee27c96e5050a829523dfd43e1f0663f..e54a60c7bf28273ce5a2a7f8fa41f85d31ac94f3 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -27,6 +27,7 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/led-class-multicolor.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/property.h>
@@ -101,8 +102,11 @@ struct pca963x;
struct pca963x_led {
struct pca963x *chip;
struct led_classdev led_cdev;
+ struct led_classdev_mc mc_cdev;
+ struct mc_subled subleds[4];
int led_num; /* 0 .. 15 potentially */
bool blinking;
+ bool is_mc;
u8 gdc;
u8 gfrq;
};
@@ -199,20 +203,24 @@ static void pca963x_blink(struct pca963x_led *led)
led->blinking = true;
}
-static int pca963x_power_state(struct pca963x_led *led)
+static void pca963x_track_power_state(struct pca963x_led *led, unsigned int led_num,
+ enum led_brightness brightness)
{
- struct i2c_client *client = led->chip->client;
unsigned long *leds_on = &led->chip->leds_on;
- unsigned long cached_leds = *leds_on;
- if (led->led_cdev.brightness)
- set_bit(led->led_num, leds_on);
+ if (brightness)
+ set_bit(led_num, leds_on);
else
- clear_bit(led->led_num, leds_on);
+ clear_bit(led_num, leds_on);
+}
- if (!(*leds_on) != !cached_leds)
+static int pca963x_sync_power_state(struct pca963x_led *led, unsigned long cached_leds)
+{
+ struct i2c_client *client = led->chip->client;
+
+ if (!led->chip->leds_on != !cached_leds)
return i2c_smbus_write_byte_data(client, PCA963X_MODE1,
- *leds_on ? 0 : BIT(4));
+ led->chip->leds_on ? 0 : BIT(4));
return 0;
}
@@ -221,22 +229,52 @@ static int pca963x_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct pca963x_led *led;
+ unsigned long cached_leds;
int ret;
led = container_of(led_cdev, struct pca963x_led, led_cdev);
mutex_lock(&led->chip->mutex);
+ cached_leds = led->chip->leds_on;
ret = pca963x_brightness(led, value);
if (ret < 0)
goto unlock;
- ret = pca963x_power_state(led);
+
+ pca963x_track_power_state(led, led->led_num, value);
+ ret = pca963x_sync_power_state(led, cached_leds);
unlock:
mutex_unlock(&led->chip->mutex);
return ret;
}
+static int pca963x_led_mc_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+ struct pca963x_led *led = container_of(mc_cdev, struct pca963x_led, mc_cdev);
+ unsigned long cached_leds;
+ int ret;
+
+ led_mc_calc_color_components(mc_cdev, value);
+
+ guard(mutex)(&led->chip->mutex);
+
+ cached_leds = led->chip->leds_on;
+ for (unsigned int i = 0; i < mc_cdev->num_colors; i++) {
+ led->led_num = mc_cdev->subled_info[i].channel;
+ ret = pca963x_brightness(led, mc_cdev->subled_info[i].brightness);
+ if (ret)
+ return ret;
+
+ pca963x_track_power_state(led, mc_cdev->subled_info[i].channel,
+ mc_cdev->subled_info[i].brightness);
+ }
+
+ return pca963x_sync_power_state(led, cached_leds);
+}
+
static unsigned int pca963x_period_scale(struct pca963x_led *led,
unsigned int val)
{
@@ -300,6 +338,77 @@ static int pca963x_blink_set(struct led_classdev *led_cdev,
return 0;
}
+static int pca963x_parse_mc_subleds(struct device *dev, struct pca963x_led *led,
+ struct fwnode_handle *fwnode,
+ const struct pca963x_chipdef *chipdef)
+{
+ unsigned int num_colors = 0;
+ int ret;
+
+ fwnode_for_each_child_node_scoped(fwnode, sub) {
+ u32 color, subreg;
+
+ if (num_colors >= ARRAY_SIZE(led->subleds))
+ return dev_err_probe(dev, -EINVAL, "Too many LEDs for node %pfw\n", fwnode);
+
+ ret = fwnode_property_read_u32(sub, "reg", &subreg);
+ if (ret || subreg >= chipdef->n_leds)
+ return dev_err_probe(dev, -EINVAL, "Invalid 'reg' for sub-LED %pfw\n", sub);
+
+ ret = fwnode_property_read_u32(sub, "color", &color);
+ if (ret)
+ return dev_err_probe(dev, ret, "Missing 'color' for sub-LED %pfw\n", sub);
+
+ led->subleds[num_colors].channel = subreg;
+ led->subleds[num_colors].color_index = color;
+ led->subleds[num_colors].intensity = LED_FULL;
+ num_colors++;
+ }
+
+ led->mc_cdev.subled_info = led->subleds;
+ led->mc_cdev.num_colors = num_colors;
+ led->mc_cdev.led_cdev.max_brightness = LED_FULL;
+ led->mc_cdev.led_cdev.brightness_set_blocking = pca963x_led_mc_set;
+
+ return 0;
+}
+
+static int pca963x_register_led(struct device *dev, struct pca963x_led *led,
+ u32 reg, struct fwnode_handle *fwnode,
+ const struct pca963x_chipdef *chipdef,
+ bool hw_blink)
+{
+ struct i2c_client *client = led->chip->client;
+ struct led_init_data init_data = {};
+ char label[32];
+ int ret;
+
+ led->led_num = reg;
+ led->is_mc = fwnode_get_child_node_count(fwnode) > 0;
+
+ if (led->is_mc) {
+ ret = pca963x_parse_mc_subleds(dev, led, fwnode, chipdef);
+ if (ret)
+ return ret;
+ } else {
+ led->led_cdev.brightness_set_blocking = pca963x_led_set;
+ if (hw_blink)
+ led->led_cdev.blink_set = pca963x_blink_set;
+ }
+
+ init_data.fwnode = fwnode;
+ /* for backwards compatibility */
+ init_data.devicename = "pca963x";
+ snprintf(label, sizeof(label), "%d:%.2x:%u", client->adapter->nr, client->addr, reg);
+ init_data.default_label = label;
+
+ if (led->is_mc)
+ return devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
+ &init_data);
+
+ return devm_led_classdev_register_ext(dev, &led->led_cdev, &init_data);
+}
+
static int pca963x_register_leds(struct i2c_client *client,
struct pca963x *chip)
{
@@ -338,37 +447,18 @@ static int pca963x_register_leds(struct i2c_client *client,
return ret;
device_for_each_child_node_scoped(dev, child) {
- struct led_init_data init_data = {};
- char default_label[32];
-
ret = fwnode_property_read_u32(child, "reg", ®);
- if (ret || reg >= chipdef->n_leds) {
- dev_err(dev, "Invalid 'reg' property for node %pfw\n",
- child);
- return -EINVAL;
- }
+ if (ret || reg >= chipdef->n_leds)
+ return dev_err_probe(dev, -EINVAL,
+ "Invalid 'reg' property for node %pfw\n", child);
- led->led_num = reg;
led->chip = chip;
- led->led_cdev.brightness_set_blocking = pca963x_led_set;
- if (hw_blink)
- led->led_cdev.blink_set = pca963x_blink_set;
led->blinking = false;
- init_data.fwnode = child;
- /* for backwards compatibility */
- init_data.devicename = "pca963x";
- snprintf(default_label, sizeof(default_label), "%d:%.2x:%u",
- client->adapter->nr, client->addr, reg);
- init_data.default_label = default_label;
-
- ret = devm_led_classdev_register_ext(dev, &led->led_cdev,
- &init_data);
- if (ret) {
- dev_err(dev, "Failed to register LED for node %pfw\n",
- child);
- return ret;
- }
+ ret = pca963x_register_led(dev, led, reg, child, chipdef, hw_blink);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to register LED for node %pfw\n",
+ child);
++led;
}
--
2.34.1
next prev parent reply other threads:[~2026-07-10 13:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-10 13:49 [PATCH v5 0/4] leds: pca963x: Add multicolor support and enable Monza RGB LEDs Loic Poulain
2026-07-10 13:49 ` [PATCH v5 1/4] dt-bindings: leds: nxp,pca963x: fix reg maximum for pca9635 Loic Poulain
2026-07-10 13:54 ` sashiko-bot
2026-07-10 13:49 ` [PATCH v5 2/4] dt-bindings: leds: nxp,pca963x: add multicolor LED support Loic Poulain
2026-07-10 13:59 ` sashiko-bot
2026-07-10 13:49 ` Loic Poulain [this message]
2026-07-10 14:10 ` [PATCH v5 3/4] leds: pca963x: add multicolor LED class support sashiko-bot
2026-07-10 13:49 ` [PATCH v5 4/4] arm64: dts: monaco-arduino-monza: microcontroller LEDs Loic Poulain
2026-07-10 14:14 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260710-monza-leds-v5-3-a8972d28c28f@oss.qualcomm.com \
--to=loic.poulain@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox