From: David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Petr Hodina <petr.hodina@protonmail.com>,
Richard Acayan <mailingradian@gmail.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org,
David Heidelberg <david@ixit.cz>
Subject: [PATCH v6 0/2] Add initial dual front camera and rear flash support for Pixel 3 / 3 XL
Date: Mon, 20 Jul 2026 12:53:06 +0200 [thread overview]
Message-ID: <20260720-pixel3-camera-v6-0-afe419bef476@ixit.cz> (raw)
Describe the dual front-facing IMX355 sensors (standard and wide)
and enable the PMI8998 flash LED with hardware-accurate limits.
This brings up the basic camera topology and flash support in DT.
Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v6:
- Remove forgotten bias-pull-down property from cci0_sleep node.
(dtbs_check)
- ..-regulator -> regulator-.. (Konrad)
- Rename camera -pin to -state and remove _pin from the labes. (Konrad,
dtbs_check)
- Link to v5: https://lore.kernel.org/r/20260719-pixel3-camera-v5-0-99593f1bd8ec@ixit.cz
Changes in v5:
- Added function-enumarator to flash LEDs. (Sashiko)
- Dropped l22a regulator needed only for NFOV actuator. (Sashiko)
- Dropped vdda-csi[0-2]-supply, as it was unused. (Sashiko).
- Added previously omited cam_mclk2_sleep sleep state.
- Link to v4: https://lore.kernel.org/r/20260719-pixel3-camera-v4-0-48cab1236852@ixit.cz
Changes in v4:
- Use 24 MHz ext clock for the cameras, as the downstream does, since
the upstream driver can now support it.
- Added additional LED, as the phone contains two separately controlled
white LEDs flash (upper and bottom, in one module).
- Increase flash-max-microamp, as I took wrong "flash" from the
downstream sources and dropped Dmitry R-b.
- Address formatting issues. (Konrad)
- Link to v3: https://lore.kernel.org/r/20260412-pixel3-camera-v3-0-e26b090a6110@ixit.cz
Changes in v3:
- Dropped cam_vio label. (Dmitry)
- Move the MCLK2 pinctrl from cameras to common camss. (Dmitry)
- Link to v2: https://lore.kernel.org/r/20260411-pixel3-camera-v2-0-41b889abb14c@ixit.cz
Changes in v2:
- leds.h include escaped the initial submission. Fixed.
- Link to v1: https://lore.kernel.org/r/20260411-pixel3-camera-v1-0-2757606515b6@ixit.cz
---
David Heidelberg (2):
arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras
arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs
arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 198 ++++++++++++++++++++-
1 file changed, 197 insertions(+), 1 deletion(-)
---
base-commit: 0718283ab28bc3907e10b61a6b4be6fefa1cbb2f
change-id: 20260315-pixel3-camera-a9989bf589ee
Best regards,
--
David Heidelberg <david@ixit.cz>
next reply other threads:[~2026-07-20 10:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 10:53 David Heidelberg via B4 Relay [this message]
2026-07-20 10:53 ` [PATCH v6 1/2] arm64: dts: qcom: sdm845-google: Add dual front IMX355 cameras David Heidelberg via B4 Relay
2026-07-20 11:01 ` Konrad Dybcio
2026-07-20 11:13 ` David Heidelberg
2026-07-20 11:11 ` sashiko-bot
2026-07-20 10:53 ` [PATCH v6 2/2] arm64: dts: qcom: sdm845-google: Enable PMI8998 camera flash LEDs David Heidelberg via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720-pixel3-camera-v6-0-afe419bef476@ixit.cz \
--to=devnull+david.ixit.cz@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mailingradian@gmail.com \
--cc=petr.hodina@protonmail.com \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox