Re: [PATCH v6 03/12] i3c: master: Support ACPI enumeration of child devices

[sashiko-bot@kernel.org]

> Although the existing subsystem allows host controllers to register
> through the ACPI table, it was not possible to describe I3C or I2C
> devices when using ACPI. This is because the driver relied on the reg
> property to retrieve the PID, static address, etc., whereas ACPI uses
> _ADR or serial resources to describe such devices.
> 
> Read _ADR and LVR from ACPI resources and extract the data as per the
> ACPI specification for an I3C bus. Also read mipi-i3c-static-address as
> per the MIPI DISCO specifications [1] to get the static address to be
> used.
> 
> Enable describing I3C or I2C devices in the ACPI table. This is required
> if the device uses a static address or if it needs device-specific
> properties.
> 
> [1] https://www.mipi.org/mipi-disco-for-i3c-download
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260721040805.1696503-1-akhilrajeev@nvidia.com?part=3