From: Conor Dooley <conor@kernel.org>
To: "Pradhan, Sanman" <sanman.pradhan@hpe.com>
Cc: "linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>,
"linux@roeck-us.net" <linux@roeck-us.net>,
"robh@kernel.org" <robh@kernel.org>,
"krzk+dt@kernel.org" <krzk+dt@kernel.org>,
"conor+dt@kernel.org" <conor+dt@kernel.org>,
"corbet@lwn.net" <corbet@lwn.net>,
"skhan@linuxfoundation.org" <skhan@linuxfoundation.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sanman Pradhan <psanman@juniper.net>
Subject: Re: [PATCH 1/2] dt-bindings: hwmon: pmbus: Add Analog Devices MAX16545/MAX16550 and Volterra VT7505
Date: Wed, 22 Jul 2026 17:34:00 +0100 [thread overview]
Message-ID: <20260722-everglade-nickname-cdd52d3842a5@spud> (raw)
In-Reply-To: <20260722150324.164799-2-sanman.pradhan@hpe.com>
[-- Attachment #1: Type: text/plain, Size: 2894 bytes --]
On Wed, Jul 22, 2026 at 03:03:37PM +0000, Pradhan, Sanman wrote:
> From: Sanman Pradhan <psanman@juniper.net>
>
> Add device tree binding documentation for the Analog Devices MAX16545 and
> MAX16550, and the Volterra VT7505 PMBus controllers.
>
> Signed-off-by: Sanman Pradhan <psanman@juniper.net>
> ---
> .../bindings/hwmon/pmbus/adi,vt7505.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml
> new file mode 100644
> index 000000000000..286c88eb7be8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,vt7505.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/pmbus/adi,vt7505.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX16545/MAX16550 and Volterra VT7505 PMBus controllers
> +
> +maintainers:
> + - Sanman Pradhan <psanman@juniper.net>
> +
> +description: |
> + The Analog Devices MAX16545 and MAX16550, and the Volterra VT7505, are PMBus
> + controllers that provide input/output voltage, input/output current,
> + input power and temperature monitoring over the PMBus interface.
> +
> + The MAX16545 uses the same programming model as the VT7505.
> +
> + Datasheets:
> + https://www.analog.com/media/en/technical-documentation/data-sheets/max16545b-max16545c.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/max16550.pdf
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - adi,max16550
> + - adi,vt7505
> + - items:
> + - const: adi,max16545
> + - const: adi,vt7505
> +
> + reg:
> + maxItems: 1
> +
> + adi,rload-ohms:
> + description:
> + Resistance in ohms of the external current-report resistor connected
> + between the ILOAD pin and ground. It is used to scale the reported
> + input and output current and power.:wq
> + minimum: 1
> + default: 4750
> +
> + adi,ocp-severe-filter:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Deglitch time applied to the severe overcurrent-protection comparator,
> + programmed into the MFR_CONFIG[15:14] field. The MAX16550 and VT7505
> + expose this field; it decodes as 0 = 0 us, 1 = 1 us, 2 = 2 us and
> + 3 = 10 us. On the MAX16545 the severe overcurrent delay is fixed and
Please represent this property in microseconds.
pw-bot: changes-requested
Otherwise, I think this looks fine.
Thanks,
Conor.
> + these bits are reserved.
> + enum: [0, 1, 2, 3]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2026-07-22 16:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-22 15:03 [PATCH 0/2] hwmon: (pmbus) Add Analog Devices MAX16545/MAX16550 and Volterra VT7505 driver Pradhan, Sanman
2026-07-22 15:03 ` [PATCH 1/2] dt-bindings: hwmon: pmbus: Add Analog Devices MAX16545/MAX16550 and Volterra VT7505 Pradhan, Sanman
2026-07-22 16:23 ` sashiko-bot
2026-07-22 16:34 ` Conor Dooley [this message]
2026-07-22 15:03 ` [PATCH 2/2] hwmon: (pmbus/vt7505) Add driver for " Pradhan, Sanman
2026-07-22 16:31 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260722-everglade-nickname-cdd52d3842a5@spud \
--to=conor@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=psanman@juniper.net \
--cc=robh@kernel.org \
--cc=sanman.pradhan@hpe.com \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox