Devicetree
 help / color / mirror / Atom feed
From: Antoni Pokusinski <apokusinski01@gmail.com>
To: alexandre.belloni@bootlin.com, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org
Cc: marex@denx.de, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org,
	Antoni Pokusinski <apokusinski01@gmail.com>
Subject: [PATCH v2 1/8] dt-bindings: rtc: abx80x: document ABX81X RTCs
Date: Sat, 25 Jul 2026 16:57:11 +0200	[thread overview]
Message-ID: <20260725145718.14733-2-apokusinski01@gmail.com> (raw)
In-Reply-To: <20260725145718.14733-1-apokusinski01@gmail.com>

Abracon AB0815 and AB1815 are RTC modules with SPI interface.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 .../bindings/rtc/abracon,abx80x.yaml           | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
index 355b0598411a..d105570bcd5a 100644
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+title: Abracon ABX80X (I2C) and ABX81X (SPI) ultra low power RTC/Alarm chips
 
 maintainers:
   - linux-rtc@vger.kernel.org
@@ -21,10 +21,12 @@ properties:
       - abracon,ab0803
       - abracon,ab0804
       - abracon,ab0805
+      - abracon,ab0815
       - abracon,ab1801
       - abracon,ab1803
       - abracon,ab1804
       - abracon,ab1805
+      - abracon,ab1815
       - microcrystal,rv1805
 
   reg:
@@ -61,6 +63,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - $ref: rtc.yaml#
   - if:
       properties:
@@ -73,6 +76,8 @@ allOf:
                 - abracon,ab1804
                 - abracon,ab0805
                 - abracon,ab1805
+                - abracon,ab0815
+                - abracon,ab1815
     then:
       properties:
         abracon,tc-diode: false
@@ -96,3 +101,14 @@ examples:
             interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
         };
     };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@0 {
+            compatible = "abracon,ab1815";
+            reg = <0>;
+        };
+    };
-- 
2.55.0


  reply	other threads:[~2026-07-25 14:59 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-25 14:57 [PATCH v2 0/8] rtc: abx80x: add support for abx81x Antoni Pokusinski
2026-07-25 14:57 ` Antoni Pokusinski [this message]
2026-07-25 15:04   ` [PATCH v2 1/8] dt-bindings: rtc: abx80x: document ABX81X RTCs Krzysztof Kozlowski
2026-07-25 15:11   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 2/8] rtc: abx80x: move part autodetection before RV1805 configuration Antoni Pokusinski
2026-07-25 15:07   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 3/8] rtc: abx80x: properly handle shared IRQs Antoni Pokusinski
2026-07-25 15:14   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 4/8] rtc: abx80x: add irq to struct abx80x_priv Antoni Pokusinski
2026-07-25 15:12   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 5/8] rtc: abx80x: use regmap instead of I2C specific API Antoni Pokusinski
2026-07-25 15:13   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 6/8] rtc: abx80x: replace read-modify-write pattern with regmap helpers Antoni Pokusinski
2026-07-25 15:12   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 7/8] rtc: abx80x: create abx80x_i2c_probe() Antoni Pokusinski
2026-07-25 15:13   ` sashiko-bot
2026-07-25 14:57 ` [PATCH v2 8/8] rtc: abx80x: add support for ABX81X Antoni Pokusinski
2026-07-25 15:30   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260725145718.14733-2-apokusinski01@gmail.com \
    --to=apokusinski01@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox