[PATCH v2 2/2] arm64: dts: qcom: Add base HAMOA-IOT-COME board

[Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>]

Add the initial device tree for the HAMOA-IOT-COME platform based on
the Qualcomm X1E80100 SoC.

The platform consists of a system-on-module (SoM) mounted on a carrier
board. The SoM integrates the core system functionality through a SiP
containing the X1E80100 SoC and its supporting components.

Hierarchy:

    Carrier Board
        -> SoM
            -> SiP
                -> SoC

The COME SiP hardware is effectively the same as the SoM used on the
Qualcomm HAMOA EVK, while the carrier board provides the platform-specific
peripherals and connectivity.

Compared to the HAMOA EVK, PCIe controllers 3, 5 and 6 are routed to
expansion slots, while PCIe controller 4 is connected to an ASM1164
SATA controller. The platform does not provide a USB Type-C connector.
The eUSB repeater (TUSB2E111YCGR) is configured through hardware strapping
pins and therefore requires no software control.

The initial device tree includes support for:
- UART
- Regulators
- USB
- PCIe
- Pinctrl
- ADSP, CDSP
- UFS
- Graphics
- Video

Regulators, pinctrl, graphics, video, ADSP and CDSP support are
inherited from the common hamoa-iot-som.dtsi description.

Co-developed-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Co-developed-by: Ziyue zhang <ziyue.zhang@oss.qualcomm.com>
Signed-off-by: Ziyue zhang <ziyue.zhang@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/hamoa-iot-come-som.dtsi     |  52 ++++++++
 arch/arm64/boot/dts/qcom/hamoa-iot-come.dts   | 116 ++++++++++++++++++
 3 files changed, 169 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/hamoa-iot-come-som.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/hamoa-iot-come.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index e05414290d8e..09847b4ff337 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= eliza-cqs-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= eliza-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-come.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 
 hamoa-iot-evk-el2-dtbs	:= hamoa-iot-evk.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-come-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-come-som.dtsi
new file mode 100644
index 000000000000..d8d9765be64b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-come-som.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "hamoa-iot-som.dtsi"
+
+/ {
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l2i_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	/delete-property/ usb-role-switch;
+	dr_mode = "peripheral";
+};
+
+&usb_1_ss1 {
+	/delete-property/ usb-role-switch;
+	dr_mode = "host";
+};
+
+&usb_1_ss2 {
+	/delete-property/ usb-role-switch;
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-come.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-come.dts
new file mode 100644
index 000000000000..735a2b4efd97
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-come.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "hamoa-iot-come-som.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Hamoa IoT ComE";
+	compatible = "qcom,hamoa-iot-come", "qcom,hamoa-iot-come-som",
+		     "qcom,hamoa-iot-som", "qcom,x1e80100";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&pcie3_port0 {
+	reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+};
+
+&pcie4_port0 {
+	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+};
+
+&pcie5_port0 {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+};
+
+&pcie6a_port0 {
+	reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+};
+
+&thermal_zones {
+	gpuss-0-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-1-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-2-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-3-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-4-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-5-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-6-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+
+	gpuss-7-thermal {
+		trips {
+			trip-point0 {
+				temperature = <105000>;
+			};
+		};
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
-- 
2.43.0