From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@kernel.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 3/3] riscv: dts: spacemit: Add Milk-V Jupiter board (M1)
Date: Tue, 28 Jul 2026 23:05:08 +0200 [thread overview]
Message-ID: <20260728211020.1248676-4-aurelien@aurel32.net> (raw)
In-Reply-To: <20260728211020.1248676-1-aurelien@aurel32.net>
Add support for the Milk-V Jupiter board with the M1 CPU. The M1 differs
from the K1 only by its package, which provides improved cooling
performance and allows it to run at up to 1.8 GHz instead of 1.6 GHz.
Add m1-opp.dtsi to define the 1.8 GHz operating point and the
corresponding core voltage, based on the upstream kernel. Include it
from m1-milkv-jupiter.dts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
arch/riscv/boot/dts/spacemit/Makefile | 1 +
.../boot/dts/spacemit/m1-milkv-jupiter.dts | 11 ++
arch/riscv/boot/dts/spacemit/m1-opp.dtsi | 117 ++++++++++++++++++
3 files changed, 129 insertions(+)
create mode 100644 arch/riscv/boot/dts/spacemit/m1-milkv-jupiter.dts
create mode 100644 arch/riscv/boot/dts/spacemit/m1-opp.dtsi
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 851b701e5da48..c5c38c17b6ced 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-com260-ifx.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-deepcomputing-fml13v05.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += m1-milkv-jupiter.dtb
diff --git a/arch/riscv/boot/dts/spacemit/m1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/m1-milkv-jupiter.dts
new file mode 100644
index 0000000000000..32e1468385ca0
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/m1-milkv-jupiter.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2026 Aurelien Jarno <aurelien@aurel32.net>
+ */
+
+#include "k1-milkv-jupiter-common.dtsi"
+#include "m1-opp.dtsi"
+
+/ {
+ model = "Milk-V Jupiter (M1)";
+};
diff --git a/arch/riscv/boot/dts/spacemit/m1-opp.dtsi b/arch/riscv/boot/dts/spacemit/m1-opp.dtsi
new file mode 100644
index 0000000000000..38e0ce7765a2b
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/m1-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/ {
+ cluster0_opp_table: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-819000000 {
+ opp-hz = /bits/ 64 <819000000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1050000 1050000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1160000 1160000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp_table: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-819000000 {
+ opp-hz = /bits/ 64 <819000000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-microvolt = <950000 950000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1050000 1050000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1160000 1160000 1160000>;
+ clock-latency-ns = <200000>;
+ };
+ };
+};
+
+&cpu_0 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_1 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_2 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_3 {
+ operating-points-v2 = <&cluster0_opp_table>;
+};
+
+&cpu_4 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_5 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_6 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
+
+&cpu_7 {
+ operating-points-v2 = <&cluster1_opp_table>;
+};
--
2.53.0
next prev parent reply other threads:[~2026-07-28 21:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260728211020.1248676-1-aurelien@aurel32.net>
2026-07-28 21:05 ` [PATCH 1/3] riscv: dts: spacemit: Add cpu scaling for Milk-V Jupiter Aurelien Jarno
2026-07-28 21:19 ` sashiko-bot
2026-07-28 21:05 ` [PATCH 2/3] riscv: dts: spacemit: Add a common board dtsi for Milk-V Jupiter boards Aurelien Jarno
2026-07-28 21:23 ` sashiko-bot
2026-07-28 21:05 ` Aurelien Jarno [this message]
2026-07-28 21:28 ` [PATCH 3/3] riscv: dts: spacemit: Add Milk-V Jupiter board (M1) sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260728211020.1248676-4-aurelien@aurel32.net \
--to=aurelien@aurel32.net \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox