Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Aurelien Jarno" <aurelien@aurel32.net>
Cc: conor+dt@kernel.org, devicetree@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH 2/6] riscv: dts: spacemit: k1-milkv-jupiter: fix maximum CPU core voltage
Date: Wed, 29 Jul 2026 15:14:14 +0000	[thread overview]
Message-ID: <20260729151414.840271F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260729150722.1598630-3-aurelien@aurel32.net>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] The unsafe maximum voltage limit (3.45V) for CPU core regulators `buck1` and `buck2` remains unpatched on several other SpacemiT K1 boards.
--

--- Patch [2]: [PATCH 2/6] riscv: dts: spacemit: k1-milkv-jupiter: fix maximum CPU core voltage ---
commit 2f0408a9b68518bed697666281e9fbe48abb583b
Author: Aurelien Jarno <aurelien@aurel32.net>
Subject: riscv: dts: spacemit: k1-milkv-jupiter: fix maximum CPU core voltage

This commit lowers the maximum regulator voltage for buck1 and buck2 on the
Milk-V Jupiter board from 3.45V to 1.050V. This prevents potential permanent
CPU damage from accidental overvoltage requests.

Link: https://sashiko.dev/#/message/20260728211020.1248676-2-aurelien%40aurel32.net

> diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
> index b61f5995ec771..c76b91ecb914d 100644
> --- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
> +++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
> @@ -211,14 +211,14 @@ pmic@41 {
>  		regulators {
>  			buck1 {
>  				regulator-min-microvolt = <500000>;
> -				regulator-max-microvolt = <3450000>;
> +				regulator-max-microvolt = <1050000>;
>  				regulator-ramp-delay = <5000>;
>  				regulator-always-on;
>  			};
>  
>  			buck2 {
>  				regulator-min-microvolt = <500000>;
> -				regulator-max-microvolt = <3450000>;
> +				regulator-max-microvolt = <1050000>;

[Severity: High]
This is a pre-existing issue, but this commit only fixes the maximum voltage
for the Milk-V Jupiter board. Does this same CPU core overvoltage risk
exist on the other SpacemiT K1 boards?

The unsafe regulator-max-microvolt = <3450000> limit for buck1 and buck2 is
still present in several other device trees that share the same SoC and PMIC
layout:

- arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi
- arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
- arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts
- arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts

Should these boards also have their limits updated to 1050000 to prevent
potential CPU damage from kernel misconfigurations or a privileged userspace
writing to the regulator sysfs interface?

>  				regulator-ramp-delay = <5000>;
>  				regulator-always-on;
>  			};

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260729150722.1598630-1-aurelien@aurel32.net?part=2

  reply	other threads:[~2026-07-29 15:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260729150722.1598630-1-aurelien@aurel32.net>
2026-07-29 15:02 ` [PATCH 1/6] riscv: dts: spacemit: k1-bananapi-f3: fix maximum CPU core voltage Aurelien Jarno
2026-07-29 15:19   ` sashiko-bot
2026-07-29 15:02 ` [PATCH 2/6] riscv: dts: spacemit: k1-milkv-jupiter: " Aurelien Jarno
2026-07-29 15:14   ` sashiko-bot [this message]
2026-07-29 15:02 ` [PATCH 3/6] riscv: dts: spacemit: k1-orangepi-rv2: " Aurelien Jarno
2026-07-29 15:02 ` [PATCH 4/6] riscv: dts: spacemit: k1-musepi-pro: " Aurelien Jarno
2026-07-29 15:02 ` [PATCH 5/6] riscv: dts: spacemit: k1-orangepi-r2s: " Aurelien Jarno
2026-07-29 15:15   ` sashiko-bot
2026-07-29 15:02 ` [PATCH 6/6] riscv: dts: spacemit: k1-bananapi-cm6: " Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260729151414.840271F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=aurelien@aurel32.net \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox