Devicetree
 help / color / mirror / Atom feed
From: Lachlan Michael <lachlan.michael@sony.com>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil+cisco@kernel.org, laurent.pinchart@ideasonboard.com,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	kieran.bingham@ideasonboard.com, jai.luthra@ideasonboard.com,
	Ryuichi.Tadano@sony.com, Kengo.Hayasaka@sony.com,
	Tim.Bird@sony.com, Kazumi.A.Sato@sony.com,
	linux-kernel@vger.kernel.org,
	Lachlan Michael <lachlan.michael@sony.com>
Subject: [PATCH 1/2] media: dt-bindings: imx908: Add Sony IMX908 sensor bindings
Date: Thu, 30 Jul 2026 11:15:24 +0900	[thread overview]
Message-ID: <20260730021525.166811-2-lachlan.michael@sony.com> (raw)
In-Reply-To: <20260730021525.166811-1-lachlan.michael@sony.com>

The Sony IMX908 is an 8.39 megapixel (3856x2176) CMOS image sensor
with a MIPI CSI-2 output interface.

Add device tree bindings for the sensor.

Signed-off-by: Lachlan Michael <lachlan.michael@sony.com>
---
 .../bindings/media/i2c/sony,imx908.yaml       | 107 ++++++++++++++++++
 MAINTAINERS                                   |   7 ++
 2 files changed, 114 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx908.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx908.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx908.yaml
new file mode 100644
index 000000000000..6ab382d1cf34
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx908.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2026 Sony Semiconductor Solutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX908 CMOS Image Sensor
+
+maintainers:
+  - Lachlan Michael <Lachlan.Michael@sony.com>
+
+description:
+  Sony IMX908 diagonal 6.42 mm (Type 1/2.8) CMOS active pixel type
+  solid-state image sensor with a square pixel array and 8.39 M
+  (3856x2176) pixels, supporting MIPI CSI-2 output with
+  RAW10 and RAW12 formats, configured as either 2 or 4 data lanes.
+  The I2C address is fixed to 0x1A as per sensor data sheet.
+
+properties:
+  compatible:
+    const: sony,imx908
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital supply voltage (1.1V)
+
+  ovdd-supply:
+    description: Interface supply voltage (1.8V)
+
+  avdd-supply:
+    description: Analog supply voltage (3.3V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO. Active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dvdd-supply
+  - ovdd-supply
+  - avdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+         camera@1a {
+            compatible = "sony,imx908";
+            reg = <0x1a>;
+            clocks = <&cdce913_cam0 0>;
+            dvdd-supply = <&cam_dvdd_1r1v>;
+            ovdd-supply = <&cam_ovdd_1r8v>;
+            avdd-supply = <&cam_avdd_3r3v>;
+            reset-gpios = <&tca6416_cam0 5 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx908_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <720000000>;
+                    remote-endpoint = <&csi0_in>;
+                };
+            };
+        };
+    };
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 1ab8736850ea..41b39aa24bda 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25264,6 +25264,13 @@ T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 F:	drivers/media/i2c/imx415.c
 
+SONY IMX908 SENSOR DRIVER
+M:	Lachlan Michael <lachlan.michael@sony.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx908.yaml
+F:	drivers/media/i2c/imx908.c
+
 SONY MEMORYSTICK SUBSYSTEM
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 M:	Alex Dubov <oakad@yahoo.com>
-- 
2.47.3


  reply	other threads:[~2026-07-30  2:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-30  2:15 [PATCH 0/2] Add bindings and driver for Sony IMX908 Lachlan Michael
2026-07-30  2:15 ` Lachlan Michael [this message]
2026-07-30  2:22   ` [PATCH 1/2] media: dt-bindings: imx908: Add Sony IMX908 sensor bindings sashiko-bot
2026-07-30  3:24   ` Rob Herring (Arm)
2026-07-30  9:06   ` Krzysztof Kozlowski
2026-07-30  2:15 ` [PATCH 2/2] media: i2c: Add Sony IMX908 image sensor driver Lachlan Michael
2026-07-30  2:31   ` sashiko-bot
2026-07-30  9:09   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260730021525.166811-2-lachlan.michael@sony.com \
    --to=lachlan.michael@sony.com \
    --cc=Kazumi.A.Sato@sony.com \
    --cc=Kengo.Hayasaka@sony.com \
    --cc=Ryuichi.Tadano@sony.com \
    --cc=Tim.Bird@sony.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=jai.luthra@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox