Devicetree
 help / color / mirror / Atom feed
From: Kaustabh Chakraborty <kauschluss@disroot.org>
To: "Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Kaustabh Chakraborty" <kauschluss@disroot.org>,
	"Peter Griffin" <peter.griffin@linaro.org>,
	"Alim Akhtar" <alim.akhtar@samsung.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-samsung-soc@vger.kernel.org
Subject: [PATCH v2 0/3] Add Sharp GP2AP070S Proximity Driver and enable it in Galaxy J6 (j6lte)
Date: Fri, 31 Jul 2026 01:01:28 +0530	[thread overview]
Message-ID: <20260731-gp2ap070s-v2-0-1bdfee07d5ea@disroot.org> (raw)

Sharp GP2AP070S is a promixity sensor (NOT an ambient light sensor) in
mobile devices. This sensor chip is found in mobile devices, including
(but perhaps not limited to) Samsung Galaxy J6 (codename: j6lte).

To the best of my knowledge, there's no public documentation available
for this device. [1] is a downstream kernel implementation, which has
been the single source for developing this driver. Some bits have also
been stolen from existing GP2AP* drivers available in iio/light.

The last patch in this series touches the device tree sources to add the
light sensor node in j6lte. This needs to be accepted into next only
when the former patches are in next.

[1] https://github.com/Exynos7870/android_kernel_samsung_universal7870/blob/lineage-16.0/drivers/sensors/gp2ap070s.c

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
Changes in v2:
- Reshuffle and add missing header inclusions (Joshua Crofts)
- Add missing regulators in driver and dt-schema
  (Joshua Crofts, Jonathan Cameron)
- Rename and rearrange register addresses, masks and values (Jonathan Cameron)
- Use regmap_get_device() for carrying dev pointer (Jonathan Cameron)
- Use FIELD_GET() instead of !! (Jonathan Cameron)
- Drop unused i2c_set_clientdata() (Jonathan Cameron)
- Use fsleep() instead of usleep_range() (Jonathan Cameron)
- Check if proximity-near-level is available before reading its value
  (Jonathan Cameron)
- Drop redundant dev_err_probe() from devm_request_threaded_irq()
  (Joshua Crofts)
- Use mutex guards for guarding concurrent read/write calls (Sashiko)
- Add reset chip action on removal (Sashiko)
- Ensure input value in iio_write_event_value() is 16-bit (Sashiko)
- Use regmap_bulk_*() instead of regmap_raw_*() (Jonathan Cameron)
- Hint volatile registers for regmap (Jonathan Cameron)
- Link to v1: https://patch.msgid.link/20260723-gp2ap070s-v1-0-b8ca3a4c10dd@disroot.org

---
Kaustabh Chakraborty (3):
      dt-bindings: iio: proximity: add Sharp GP2AP070S proximity sensor
      iio: proximity: add driver for Sharp GP2AP070S proximity sensor
      arm64: dts: exynos7870-j6lte: add Sharp GP2AP070S proximity sensor

 .../bindings/iio/proximity/sharp,gp2ap070s.yaml    |  59 +++
 arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts    |  55 ++-
 drivers/iio/proximity/Kconfig                      |  11 +
 drivers/iio/proximity/Makefile                     |   1 +
 drivers/iio/proximity/gp2ap070s.c                  | 502 +++++++++++++++++++++
 5 files changed, 626 insertions(+), 2 deletions(-)
---
base-commit: 290aaf24a551d5a0dce037e3fab30820f9113a10
change-id: 20260723-gp2ap070s-f7e0120970a5

Best regards,
--  
Kaustabh Chakraborty <kauschluss@disroot.org>


             reply	other threads:[~2026-07-30 19:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-30 19:31 Kaustabh Chakraborty [this message]
2026-07-30 19:31 ` [PATCH v2 1/3] dt-bindings: iio: proximity: add Sharp GP2AP070S proximity sensor Kaustabh Chakraborty
2026-07-30 19:38   ` sashiko-bot
2026-07-30 19:31 ` [PATCH v2 2/3] iio: proximity: add driver for " Kaustabh Chakraborty
2026-07-30 19:36   ` Kaustabh Chakraborty
2026-07-30 19:43   ` sashiko-bot
2026-07-30 19:54   ` Uwe Kleine-König
2026-07-30 19:31 ` [PATCH v2 3/3] arm64: dts: exynos7870-j6lte: add " Kaustabh Chakraborty

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260731-gp2ap070s-v2-0-1bdfee07d5ea@disroot.org \
    --to=kauschluss@disroot.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=peter.griffin@linaro.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox