Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Shivendra Pratap" <shivendra.pratap@oss.qualcomm.com>
Cc: mfd@lists.linux.dev, lee@kernel.org, conor+dt@kernel.org,
	devicetree@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH v24 05/12] dt-bindings: arm: Document reboot mode magic
Date: Mon, 03 Aug 2026 10:09:35 +0000	[thread overview]
Message-ID: <20260803100936.3E40E1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260803-arm-psci-system_reset2-vendor-reboots-v24-5-889281373870@oss.qualcomm.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Incorrect tuple validation of a 2D `uint32-array`, applying outer array constraints and invalid property-level type `$ref`s to inner elements, breaking validation and dropping the `minimum` constraint.
--

--- Patch [5]: [PATCH v24 05/12] dt-bindings: arm: Document reboot mode magic ---
commit 27b283c27fa751f1b79c98734e61c56bbcfb0f0f
Author: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>

dt-bindings: arm: Document reboot mode magic

This commit adds bindings to describe vendor-specific reboot modes in the PSCI
SYSTEM_RESET2 call. The values defined here correspond to valid parameters
for vendor-specific reset types.

> diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
> index 6e2e0c5518411..7d6a86690a2e5 100644
> --- a/Documentation/devicetree/bindings/arm/psci.yaml
> +++ b/Documentation/devicetree/bindings/arm/psci.yaml
> @@ -98,6 +98,41 @@ properties:
[ ... ]
> +    patternProperties:
> +      "^mode-.*$":
> +        minItems: 1
> +        maxItems: 3
> +        items:
> +          - description: arg1 (vendor-specific SYSTEM_RESET2 reset_type)
> +            allOf:
> +              - $ref: /schemas/types.yaml#/definitions/uint32
> +              - minimum: 0x80000000
> +          - description: arg2 (cookie_lo in 2-cell form, cookie_hi in 3-cell form)
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +          - description: arg3 (cookie_lo in 3-cell form)
> +            $ref: /schemas/types.yaml#/definitions/uint32

[Severity: Medium]
Will this schema correctly validate the property values?

Since dt-schema parses device tree arrays as 2D arrays, applying JSON Schema
items list validation to the outer array evaluates the entire inner tuple as a
single element against the schema for arg1.

This regression can cause dt_binding_check to reject valid device trees because
it ends up validating a 1xN array against uint32, which expects a 1x1 matrix.

Because JSON Schema ignores minimum constraints when applied to an array, is it
possible this silently bypasses the minimum constraint of 0x80000000?

Should this pattern property reference /schemas/types.yaml#/definitions/uint32-array
with the element constraints applied natively under it?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260803-arm-psci-system_reset2-vendor-reboots-v24-0-889281373870@oss.qualcomm.com?part=5

  reply	other threads:[~2026-08-03 10:09 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-03  9:43 [PATCH v24 00/12] Implement PSCI reboot mode driver for PSCI resets Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 01/12] power: reset: reboot-mode: Support up to 3 magic values per mode Shivendra Pratap
2026-08-03  9:56   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 02/12] power: reset: reboot-mode: Add support for predefined reboot modes Shivendra Pratap
2026-08-03  9:59   ` sashiko-bot
2026-08-04 14:19     ` Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 03/12] firmware: psci: Introduce command-based resets Shivendra Pratap
2026-08-03 10:01   ` sashiko-bot
2026-08-04 14:38     ` Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 04/12] mfd: psci-mfd: Add PSCI MFD driver for cpuidle-psci-domain cell Shivendra Pratap
2026-08-03 10:00   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 05/12] dt-bindings: arm: Document reboot mode magic Shivendra Pratap
2026-08-03 10:09   ` sashiko-bot [this message]
2026-08-03 11:44   ` Rob Herring (Arm)
2026-08-03 12:46     ` Shivendra Pratap
2026-08-03 14:02   ` Rob Herring
2026-08-03 14:21     ` Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 06/12] power: reset: Add psci-reboot-mode driver Shivendra Pratap
2026-08-03 10:11   ` sashiko-bot
2026-08-03 13:07     ` Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 07/12] mfd: core: Add firmware-node support to MFD cells Shivendra Pratap
2026-08-03 10:07   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 08/12] mfd: psci-mfd: Add psci-reboot-mode child cell Shivendra Pratap
2026-08-03 10:07   ` sashiko-bot
2026-08-03 12:52     ` Shivendra Pratap
2026-08-03  9:43 ` [PATCH v24 09/12] arm64: dts: qcom: Add psci reboot-modes for kodiak boards Shivendra Pratap
2026-08-03 10:13   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 10/12] arm64: dts: qcom: Add psci reboot-modes for lemans boards Shivendra Pratap
2026-08-03 10:15   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 11/12] arm64: dts: qcom: Add psci reboot-modes for monaco boards Shivendra Pratap
2026-08-03 10:13   ` sashiko-bot
2026-08-03  9:43 ` [PATCH v24 12/12] arm64: dts: qcom: Add psci reboot-modes for talos boards Shivendra Pratap
2026-08-03 10:14   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260803100936.3E40E1F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lee@kernel.org \
    --cc=mfd@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=shivendra.pratap@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox