From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<p.zabel@pengutronix.de>, <cylee12@realtek.com>,
<jyanchou@realtek.com>, <bmasney@redhat.com>
Cc: <afaerber@suse.com>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-realtek-soc@lists.infradead.org>, <james.tai@realtek.com>,
<cy.huang@realtek.com>, <stanley_chang@realtek.com>,
<eleanor.lin@realtek.com>
Subject: [PATCH v12 10/11] clk: realtek: Add RTD1625-ISO clock controller driver
Date: Wed, 5 Aug 2026 00:38:06 +0800 [thread overview]
Message-ID: <20260804163807.1285869-11-eleanor.lin@realtek.com> (raw)
In-Reply-To: <20260804163807.1285869-1-eleanor.lin@realtek.com>
From: Cheng-Yu Lee <cylee12@realtek.com>
Add support for the ISO (Isolation) domain clock controller on the Realtek
RTD1625 SoC. This controller manages clocks in the always-on power domain,
ensuring essential services remain functional even when the main system
power is gated.
Because the reset controller shares the same register space with this ISO
clock controller, this driver also acts as the parent device and registers
the reset controller as an auxiliary device on the auxiliary bus.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v12:
- Replace of_device_get_match_data() with device_get_match_data().
- Use module_platform_driver().
- Add spaces near {}.
- Remove .suppress_bind_attrs and add .remove callback.
---
drivers/clk/realtek/Makefile | 1 +
drivers/clk/realtek/clk-rtd1625-iso.c | 142 ++++++++++++++++++++++++++
2 files changed, 143 insertions(+)
create mode 100644 drivers/clk/realtek/clk-rtd1625-iso.c
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 52d5d1b18104..e8d9017098d3 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -9,3 +9,4 @@ clk-rtk-y += freq_table.o
clk-rtk-$(CONFIG_RTK_CLK_PLL_MMC) += clk-pll-mmc.o
obj-$(CONFIG_CLK_RTD1625) += clk-rtd1625-crt.o
+obj-$(CONFIG_CLK_RTD1625) += clk-rtd1625-iso.o
diff --git a/drivers/clk/realtek/clk-rtd1625-iso.c b/drivers/clk/realtek/clk-rtd1625-iso.c
new file mode 100644
index 000000000000..6025c148adf8
--- /dev/null
+++ b/drivers/clk/realtek/clk-rtd1625-iso.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024-2026 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include <dt-bindings/clock/realtek,rtd1625-clk.h>
+#include <linux/array_size.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include "clk-regmap-gate.h"
+
+#define RTD1625_ISO_CLK_MAX 19
+#define RTD1625_ISO_S_CLK_MAX 5
+
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_p4, 0, 0x4, 0, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_p3, 0, 0x4, 1, 0);
+static RTK_CLK_REGMAP_GATE(clk_en_misc_cec0, "clk_en_misc", 0, 0x4, 2, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_cbusrx_sys, 0, 0x4, 3, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_cbustx_sys, 0, 0x4, 4, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_cbus_sys, 0, 0x4, 5, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_cbus_osc, 0, 0x4, 6, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_i2c0, 0, 0x4, 9, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_i2c1, 0, 0x4, 10, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_etn_250m, 0, 0x4, 11, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_etn_sys, 0, 0x4, 12, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_drd, 0, 0x4, 13, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_host, 0, 0x4, 14, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb_u3_host, 0, 0x4, 15, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_usb, 0, 0x4, 16, 0);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_vtc, 0, 0x4, 17, 0);
+static RTK_CLK_REGMAP_GATE(clk_en_misc_vfd, "clk_en_misc", 0, 0x4, 18, 0);
+
+static struct rtk_clk_regmap *rtd1625_iso_clk_regmap_list[] = {
+ &clk_en_usb_p4.clkr,
+ &clk_en_usb_p3.clkr,
+ &clk_en_misc_cec0.clkr,
+ &clk_en_cbusrx_sys.clkr,
+ &clk_en_cbustx_sys.clkr,
+ &clk_en_cbus_sys.clkr,
+ &clk_en_cbus_osc.clkr,
+ &clk_en_i2c0.clkr,
+ &clk_en_i2c1.clkr,
+ &clk_en_etn_250m.clkr,
+ &clk_en_etn_sys.clkr,
+ &clk_en_usb_drd.clkr,
+ &clk_en_usb_host.clkr,
+ &clk_en_usb_u3_host.clkr,
+ &clk_en_usb.clkr,
+ &clk_en_vtc.clkr,
+ &clk_en_misc_vfd.clkr,
+};
+
+static struct clk_hw_onecell_data rtd1625_iso_clk_data = {
+ .num = RTD1625_ISO_CLK_MAX,
+ .hws = {
+ [RTD1625_ISO_CLK_EN_USB_P4] = &__rtk_clk_regmap_gate_hw(&clk_en_usb_p4),
+ [RTD1625_ISO_CLK_EN_USB_P3] = &__rtk_clk_regmap_gate_hw(&clk_en_usb_p3),
+ [RTD1625_ISO_CLK_EN_MISC_CEC0] = &__rtk_clk_regmap_gate_hw(&clk_en_misc_cec0),
+ [RTD1625_ISO_CLK_EN_CBUSRX_SYS] = &__rtk_clk_regmap_gate_hw(&clk_en_cbusrx_sys),
+ [RTD1625_ISO_CLK_EN_CBUSTX_SYS] = &__rtk_clk_regmap_gate_hw(&clk_en_cbustx_sys),
+ [RTD1625_ISO_CLK_EN_CBUS_SYS] = &__rtk_clk_regmap_gate_hw(&clk_en_cbus_sys),
+ [RTD1625_ISO_CLK_EN_CBUS_OSC] = &__rtk_clk_regmap_gate_hw(&clk_en_cbus_osc),
+ [RTD1625_ISO_CLK_EN_I2C0] = &__rtk_clk_regmap_gate_hw(&clk_en_i2c0),
+ [RTD1625_ISO_CLK_EN_I2C1] = &__rtk_clk_regmap_gate_hw(&clk_en_i2c1),
+ [RTD1625_ISO_CLK_EN_ETN_250M] = &__rtk_clk_regmap_gate_hw(&clk_en_etn_250m),
+ [RTD1625_ISO_CLK_EN_ETN_SYS] = &__rtk_clk_regmap_gate_hw(&clk_en_etn_sys),
+ [RTD1625_ISO_CLK_EN_USB_DRD] = &__rtk_clk_regmap_gate_hw(&clk_en_usb_drd),
+ [RTD1625_ISO_CLK_EN_USB_HOST] = &__rtk_clk_regmap_gate_hw(&clk_en_usb_host),
+ [RTD1625_ISO_CLK_EN_USB_U3_HOST] = &__rtk_clk_regmap_gate_hw(&clk_en_usb_u3_host),
+ [RTD1625_ISO_CLK_EN_USB] = &__rtk_clk_regmap_gate_hw(&clk_en_usb),
+ [RTD1625_ISO_CLK_EN_VTC] = &__rtk_clk_regmap_gate_hw(&clk_en_vtc),
+ [RTD1625_ISO_CLK_EN_MISC_VFD] = &__rtk_clk_regmap_gate_hw(&clk_en_misc_vfd),
+ },
+};
+
+static const struct rtk_clk_desc rtd1625_iso_desc = {
+ .clk_data = &rtd1625_iso_clk_data,
+ .clks = rtd1625_iso_clk_regmap_list,
+ .num_clks = ARRAY_SIZE(rtd1625_iso_clk_regmap_list),
+ .aux_name = "rtd1625_iso_rst",
+};
+
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_irda, 0, 0x4, 6, 1);
+static RTK_CLK_REGMAP_GATE_NO_PARENT(clk_en_ur10, 0, 0x4, 8, 1);
+
+static struct rtk_clk_regmap *rtd1625_iso_s_clk_regmap_list[] = {
+ &clk_en_irda.clkr,
+ &clk_en_ur10.clkr,
+};
+
+static struct clk_hw_onecell_data rtd1625_iso_s_clk_data = {
+ .num = RTD1625_ISO_S_CLK_MAX,
+ .hws = {
+ [RTD1625_ISO_S_CLK_EN_IRDA] = &__rtk_clk_regmap_gate_hw(&clk_en_irda),
+ [RTD1625_ISO_S_CLK_EN_UR10] = &__rtk_clk_regmap_gate_hw(&clk_en_ur10),
+ },
+};
+
+static const struct rtk_clk_desc rtd1625_iso_s_desc = {
+ .clk_data = &rtd1625_iso_s_clk_data,
+ .clks = rtd1625_iso_s_clk_regmap_list,
+ .num_clks = ARRAY_SIZE(rtd1625_iso_s_clk_regmap_list),
+ .aux_name = "rtd1625_iso_s_rst",
+};
+
+static int rtd1625_iso_probe(struct platform_device *pdev)
+{
+ const struct rtk_clk_desc *desc;
+
+ desc = device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ return rtk_clk_probe(pdev, desc);
+}
+
+static const struct of_device_id rtd1625_iso_match[] = {
+ { .compatible = "realtek,rtd1625-iso-clk", .data = &rtd1625_iso_desc },
+ { .compatible = "realtek,rtd1625-iso-s-clk", .data = &rtd1625_iso_s_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtd1625_iso_match);
+
+static struct platform_driver rtd1625_iso_driver = {
+ .probe = rtd1625_iso_probe,
+ .remove = rtk_clk_remove,
+ .driver = {
+ .name = "rtk-rtd1625-iso-clk",
+ .of_match_table = rtd1625_iso_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+module_platform_driver(rtd1625_iso_driver);
+
+MODULE_DESCRIPTION("Realtek RTD1625 ISO Clock Controller Driver");
+MODULE_AUTHOR("Cheng-Yu Lee <cylee12@realtek.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("CLK_REALTEK");
--
2.43.0
next prev parent reply other threads:[~2026-08-04 16:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 16:37 [PATCH v12 00/11] clk / reset: realtek: Add RTD1625 clock and reset support Yu-Chun Lin
2026-08-04 16:37 ` [PATCH v12 01/11] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller Yu-Chun Lin
2026-08-04 16:37 ` [PATCH v12 02/11] reset: Add Realtek basic reset support Yu-Chun Lin
2026-08-04 16:37 ` [PATCH v12 03/11] reset: realtek: Add RTD1625 reset controller driver Yu-Chun Lin
2026-08-04 16:38 ` [PATCH v12 04/11] clk: realtek: Introduce common probe() and remove() Yu-Chun Lin
2026-08-04 16:54 ` sashiko-bot
2026-08-04 16:38 ` [PATCH v12 05/11] clk: realtek: Add support for phase locked loops (PLLs) Yu-Chun Lin
2026-08-04 16:38 ` [PATCH v12 06/11] clk: realtek: Add support for gate clock Yu-Chun Lin
2026-08-04 16:38 ` [PATCH v12 07/11] clk: realtek: Add support for mux clock Yu-Chun Lin
2026-08-04 16:38 ` [PATCH v12 08/11] clk: realtek: Add support for MMC-tuned PLL clocks Yu-Chun Lin
2026-08-04 16:38 ` [PATCH v12 09/11] clk: realtek: Add RTD1625-CRT clock controller driver Yu-Chun Lin
2026-08-04 17:12 ` sashiko-bot
2026-08-04 16:38 ` Yu-Chun Lin [this message]
2026-08-04 17:05 ` [PATCH v12 10/11] clk: realtek: Add RTD1625-ISO " sashiko-bot
2026-08-04 16:38 ` [PATCH v12 11/11] arm64: dts: realtek: Add clock support for RTD1625 Yu-Chun Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804163807.1285869-11-eleanor.lin@realtek.com \
--to=eleanor.lin@realtek.com \
--cc=afaerber@suse.com \
--cc=bmasney@redhat.com \
--cc=conor+dt@kernel.org \
--cc=cy.huang@realtek.com \
--cc=cylee12@realtek.com \
--cc=devicetree@vger.kernel.org \
--cc=james.tai@realtek.com \
--cc=jyanchou@realtek.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-realtek-soc@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=stanley_chang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox