From: Colin Huang via B4 Relay <devnull+u8813345.gmail.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
colin.huang2@amd.com, Colin Huang <u8813345@gmail.com>,
Carl Lee <carl.lee@amd.com>, Rex Fu <rex.fu.amd@gmail.com>,
Andy Chung <Andy.Chung@amd.com>, Peter Shen <peter.shen@amd.com>
Subject: [PATCH v4 00/12] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
Date: Wed, 05 Aug 2026 21:02:28 +0800 [thread overview]
Message-ID: <20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com> (raw)
This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com
Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com
Changes in v2:
- Fix dtbs_check fail.
Validated by following command:
make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com
---
Andy Chung (1):
ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC
Carl Lee (1):
ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
Colin Huang (6):
dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors
Rex Fu (4):
ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
ARM: dts: aspeed: anacapa: Add SPI flash VCC supply
.../devicetree/bindings/arm/aspeed/aspeed.yaml | 3 +
.../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 265 +++++
.../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts | 1079 ++++++++++++++++++++
.../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts | 408 ++++++++
.../dts/aspeed/aspeed-bmc-facebook-anacapa.dts | 1077 +------------------
5 files changed, 1756 insertions(+), 1076 deletions(-)
---
base-commit: 112264fb0bd0a7982b13da18cd3e289e2ab76eed
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0
Best regards,
--
Colin Huang <u8813345@gmail.com>
next reply other threads:[~2026-08-05 13:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 13:02 Colin Huang via B4 Relay [this message]
2026-08-05 13:02 ` [PATCH v4 01/12] dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it Colin Huang via B4 Relay
2026-08-05 13:18 ` sashiko-bot
2026-08-06 7:47 ` Colin Huang
2026-08-05 13:02 ` [PATCH v4 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1 Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 04/12] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2 Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 05/12] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 06/12] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 07/12] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 08/12] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC Colin Huang via B4 Relay
2026-08-05 13:29 ` sashiko-bot
2026-08-06 1:22 ` Colin Huang
2026-08-05 13:02 ` [PATCH v4 09/12] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors Colin Huang via B4 Relay
2026-08-05 13:02 ` [PATCH v4 10/12] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander Colin Huang via B4 Relay
2026-08-05 13:28 ` sashiko-bot
2026-08-06 7:59 ` Colin Huang
2026-08-05 13:02 ` [PATCH v4 11/12] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names Colin Huang via B4 Relay
2026-08-05 13:24 ` sashiko-bot
2026-08-05 13:02 ` [PATCH v4 12/12] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply Colin Huang via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com \
--to=devnull+u8813345.gmail.com@kernel.org \
--cc=Andy.Chung@amd.com \
--cc=andrew@codeconstruct.com.au \
--cc=carl.lee@amd.com \
--cc=colin.huang2@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.shen@amd.com \
--cc=rex.fu.amd@gmail.com \
--cc=robh@kernel.org \
--cc=u8813345@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox