Devicetree
 help / color / mirror / Atom feed
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Marcelo Schmitt" <marcelo.schmitt@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Cosmin Tanislav" <cosmin.tanislav@analog.com>,
	linux@analog.com, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH 2/2] iio: accel: adxl367: add support for INT2 interrupt pin
Date: Wed, 5 Aug 2026 14:59:52 +0300	[thread overview]
Message-ID: <20260805115952.33894-3-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20260805115952.33894-1-antoniu.miclaus@analog.com>

The ADXL367 provides two independent interrupt output pins, INT1 and
INT2, each with its own event mapping register (INTMAP1_LOWER at 0x2A
and INTMAP2_LOWER at 0x2B) sharing an identical bit layout. Until now
the driver hardcoded INT1 for all interrupt mappings, so a board that
routes only INT2 to the host could never receive activity, inactivity
or FIFO watermark interrupts.

Determine the connected pin from the interrupt-names device tree
property using fwnode_irq_get_byname(), and route the interrupt
mappings to the matching register. When no interrupt-names are present,
default to INT1 to preserve the existing behaviour.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
 drivers/iio/accel/adxl367.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/adxl367.c b/drivers/iio/accel/adxl367.c
index 8c3de11a10a3..229974478d10 100644
--- a/drivers/iio/accel/adxl367.c
+++ b/drivers/iio/accel/adxl367.c
@@ -13,6 +13,7 @@
 #include <linux/iio/sysfs.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/unaligned.h>
@@ -81,6 +82,7 @@
 #define ADXL367_SAMPLES_L_MASK		GENMASK(7, 0)
 
 #define ADXL367_REG_INT1_MAP		0x2A
+#define ADXL367_REG_INT2_MAP		0x2B
 #define ADXL367_INT_INACT_MASK		BIT(5)
 #define ADXL367_INT_ACT_MASK		BIT(4)
 #define ADXL367_INT_FIFO_WATERMARK_MASK	BIT(2)
@@ -168,6 +170,8 @@ struct adxl367_state {
 	enum adxl367_odr	odr;
 	enum adxl367_range	range;
 
+	u8		int_map_reg;
+
 	unsigned int	act_threshold;
 	unsigned int	act_time_ms;
 	unsigned int	inact_threshold;
@@ -366,7 +370,7 @@ static int adxl367_set_act_interrupt_en(struct adxl367_state *st,
 {
 	unsigned int mask = adxl367_act_int_mask_tbl[act];
 
-	return regmap_update_bits(st->regmap, ADXL367_REG_INT1_MAP,
+	return regmap_update_bits(st->regmap, st->int_map_reg,
 				  mask, en ? mask : 0);
 }
 
@@ -378,7 +382,7 @@ static int adxl367_get_act_interrupt_en(struct adxl367_state *st,
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read(st->regmap, ADXL367_REG_INT1_MAP, &val);
+	ret = regmap_read(st->regmap, st->int_map_reg, &val);
 	if (ret)
 		return ret;
 
@@ -401,7 +405,7 @@ static int adxl367_set_act_en(struct adxl367_state *st,
 static int adxl367_set_fifo_watermark_interrupt_en(struct adxl367_state *st,
 						   bool en)
 {
-	return regmap_update_bits(st->regmap, ADXL367_REG_INT1_MAP,
+	return regmap_update_bits(st->regmap, st->int_map_reg,
 				  ADXL367_INT_FIFO_WATERMARK_MASK,
 				  en ? ADXL367_INT_FIFO_WATERMARK_MASK : 0);
 }
@@ -1426,6 +1430,27 @@ static int adxl367_setup(struct adxl367_state *st)
 	return adxl367_set_measure_en(st, true);
 }
 
+static int adxl367_get_int_line(struct adxl367_state *st, int irq)
+{
+	int int_irq;
+
+	int_irq = fwnode_irq_get_byname(dev_fwnode(st->dev), "INT1");
+	if (int_irq > 0) {
+		st->int_map_reg = ADXL367_REG_INT1_MAP;
+		return int_irq;
+	}
+
+	int_irq = fwnode_irq_get_byname(dev_fwnode(st->dev), "INT2");
+	if (int_irq > 0) {
+		st->int_map_reg = ADXL367_REG_INT2_MAP;
+		return int_irq;
+	}
+
+	/* No interrupt-names: default to INT1 for backwards compatibility. */
+	st->int_map_reg = ADXL367_REG_INT1_MAP;
+	return irq;
+}
+
 int adxl367_probe(struct device *dev, const struct adxl367_ops *ops,
 		  void *context, struct regmap *regmap, int irq)
 {
@@ -1482,6 +1507,8 @@ int adxl367_probe(struct device *dev, const struct adxl367_ops *ops,
 	if (ret)
 		return ret;
 
+	irq = adxl367_get_int_line(st, irq);
+
 	ret = devm_request_threaded_irq(st->dev, irq, NULL,
 					adxl367_irq_handler, IRQF_ONESHOT,
 					indio_dev->name, indio_dev);
-- 
2.43.0


  parent reply	other threads:[~2026-08-05 12:00 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-05 11:59 [PATCH 0/2] iio: accel: adxl367: add INT2 interrupt pin support Antoniu Miclaus
2026-08-05 11:59 ` [PATCH 1/2] dt-bindings: iio: accel: adi,adxl367: add interrupt-names Antoniu Miclaus
2026-08-05 11:59 ` Antoniu Miclaus [this message]
2026-08-05 12:15   ` [PATCH 2/2] iio: accel: adxl367: add support for INT2 interrupt pin sashiko-bot
2026-08-06 15:59   ` Nuno Sá
2026-08-06 15:59 ` [PATCH 0/2] iio: accel: adxl367: add INT2 interrupt pin support Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260805115952.33894-3-antoniu.miclaus@analog.com \
    --to=antoniu.miclaus@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=conor+dt@kernel.org \
    --cc=cosmin.tanislav@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@analog.com \
    --cc=marcelo.schmitt@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox