Devicetree
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Jorijn van der Graaf" <jorijnvdgraaf@catcrafts.net>
Cc: robh@kernel.org, devicetree@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v4 2/6] nfc: s3fwrn5: use the "s3fwrn5_i2c" string literal directly
Date: Sat, 08 Aug 2026 02:24:22 +0000	[thread overview]
Message-ID: <20260808022423.2F8471F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260807021001.239389-3-jorijnvdgraaf@catcrafts.net>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Missing endianness conversions when parsing firmware headers and offsets, leading to failures on Big Endian architectures.
--

--- Patch [2]: [PATCH v4 2/6] nfc: s3fwrn5: use the "s3fwrn5_i2c" string literal directly ---
commit 9d4d91e92081c012d8837ad241bfc3be79ee322a
Author: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>

nfc: s3fwrn5: use the "s3fwrn5_i2c" string literal directly

This commit replaces the S3FWRN5_I2C_DRIVER_NAME define with the string
literal "s3fwrn5_i2c" directly in the driver. The define was an indirection
for a fixed ABI name and was only used locally within this file.

> diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
> index cb73993446e09..c528c085b43ef 100644
> --- a/drivers/nfc/s3fwrn5/i2c.c
> +++ b/drivers/nfc/s3fwrn5/i2c.c

[ ... ]

[Severity: High]
This is a pre-existing issue, but can this code cause failures on Big Endian
architectures due to missing endianness conversions?

In s3fwrn5_i2c_read(), the 16-bit length field is read directly in native
byte order:

drivers/nfc/s3fwrn5/i2c.c:s3fwrn5_i2c_read() {
    ...
    data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
            ((struct nci_ctrl_hdr *)hdr)->plen :
            ((struct s3fwrn5_fw_header *)hdr)->len;
    ...
}

Could this improperly byte-swap on Big Endian systems, leading to oversized
allocations in alloc_skb() and invalid I2C reads?

Additionally, in s3fwrn5_fw_request_firmware(), 32-bit offsets are copied
directly from the little-endian firmware payload into native u32 variables
without using le32_to_cpu():

drivers/nfc/s3fwrn5/firmware.c:s3fwrn5_fw_request_firmware() {
    ...
    memcpy(&sig_off, fw->fw->data + 0x14, 4);
    fw->sig = fw->fw->data + sig_off;
    ...
}

Since sig_off is byte-swapped to a massive value on Big Endian systems, does
this result in an out-of-bounds pointer calculation?

When s3fwrn5_fw_enter_update_mode() later calls s3fwrn5_fw_prep_msg(), could
copying from this fw->sig pointer trigger an unmapped memory read and
kernel panic?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260807021001.239389-1-jorijnvdgraaf@catcrafts.net?part=2

  reply	other threads:[~2026-08-08  2:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-07  2:09 [PATCH v4 0/6] nfc: s3fwrn5: support the S3NRN4V variant Jorijn van der Graaf
2026-08-07  2:09 ` [PATCH v4 1/6] nfc: s3fwrn5: drop of_match_ptr() from the I2C driver Jorijn van der Graaf
2026-08-07  2:09 ` [PATCH v4 2/6] nfc: s3fwrn5: use the "s3fwrn5_i2c" string literal directly Jorijn van der Graaf
2026-08-08  2:24   ` sashiko-bot [this message]
2026-08-07  2:09 ` [PATCH v4 3/6] dt-bindings: net: nfc: samsung,s3fwrn5: add the S3NRN4V Jorijn van der Graaf
2026-08-07  2:09 ` [PATCH v4 4/6] nfc: s3fwrn5: enable the PVDD supply Jorijn van der Graaf
2026-08-08  2:24   ` sashiko-bot
2026-08-07  2:10 ` [PATCH v4 5/6] nfc: s3fwrn5: support the S3NRN4V variant Jorijn van der Graaf
2026-08-08  2:24   ` sashiko-bot
2026-08-07  2:10 ` [PATCH v4 6/6] arm64: dts: qcom: milos-fairphone-fp6: Add NFC Jorijn van der Graaf
2026-08-08  2:24   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260808022423.2F8471F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jorijnvdgraaf@catcrafts.net \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox