Devicetree
 help / color / mirror / Atom feed
From: Jason Pettit <jason.pettit@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Akhil P Oommen <akhilpo@oss.qualcomm.com>,
	Mahadevan P <mahadevan.p@oss.qualcomm.com>,
	Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
	Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
	Ananthu C V <ananthu.cv@oss.qualcomm.com>,
	Jason Pettit <jason.pettit@oss.qualcomm.com>
Subject: [PATCH v3 2/3] arm64: dts: qcom: Add HP EliteBook X G2q 14 AI
Date: Sun, 09 Aug 2026 14:29:22 -0700	[thread overview]
Message-ID: <20260809-glymur-send-v3-2-2d1ed10e3a89@oss.qualcomm.com> (raw)
In-Reply-To: <20260809-glymur-send-v3-0-2d1ed10e3a89@oss.qualcomm.com>

Add board support for the HP EliteBook X G2q 14" Next Gen AI PC
(product SKU C4JG0AV, board 8E91), a Snapdragon X2 Elite (Glymur)
laptop, using the "hp,elitebook-x-g2q" / "qcom,glymur" compatible.

Enabled by this device tree:

  - internal eDP panel (samsung,atna33xc20)
  - 2x USB Type-C with DisplayPort alt-mode and USB
  - chassis HDMI output
  - chassis USB-A host port (usb_mp multiport controller)
  - internal eUSB2 host with the Elan fingerprint reader
  - NVMe SSD on PCIe5
  - Wi-Fi and Bluetooth
  - HID-over-I2C keyboard, touchpad, touchscreen; lid switch
  - Adreno GPU and GMU (Freedreno GL on Mesa)
  - audio playback and capture
  - real-time clock
  - compute DSP (cDSP)

The HDMI jack is driven by a power-only DisplayPort-to-HDMI LSPCON on
the usb_2 combo-PHY DP lanes rather than being a third USB-C port; HPD
is on gpio126. The LSPCON is on an I/O sub-board with no I2C/AUX control
path, so it is modelled with the generic simple-bridge "parade,ps185hdm"
compatible used by the in-tree x1e80100 HDMI-bridge boards (the exact
bridge part is unconfirmed) and it needs CONFIG_DRM_SIMPLE_BRIDGE.

The &gpu/&gmu enable, the audio nodes and &remoteproc_soccp opt into
glymur.dtsi SoC nodes that are still in-flight; those series are
declared as prerequisites in the cover letter.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Jason Pettit <jason.pettit@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts    | 1039 ++++++++++++++++++++
 2 files changed, 1040 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..146955de4606 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= eliza-cqs-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= eliza-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-asus-zenbook-a16-ux3607oa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= glymur-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= glymur-hp-elitebook-x-g2q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 
 hamoa-iot-evk-el2-dtbs	:= hamoa-iot-evk.dtb x1-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
new file mode 100644
index 000000000000..8d0fe276bf83
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/glymur-hp-elitebook-x-g2q.dts
@@ -0,0 +1,1039 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+/dts-v1/;
+
+#include "glymur.dtsi"
+
+#include "pmcx0102.dtsi"        /* SPMI0: SID-2/3 SPMI1: SID-2/3 */
+#include "pmh0101.dtsi"         /* SPMI0: SID-1                  */
+#include "pmh0110-glymur.dtsi"  /* SPMI0: SID-5/7 SPMI1: SID-5   */
+#include "pmh0104-glymur.dtsi"  /* SPMI0: SID-8/9 SPMI1: SID-11  */
+#include "pmk8850.dtsi"         /* SPMI0: SID-0                  */
+#include "smb2370.dtsi"         /* SPMI2: SID-9/10               */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+/ {
+	model = "HP EliteBook X G2q 14 AI";
+	compatible = "hp,elitebook-x-g2q", "qcom,glymur";
+
+	aliases {
+		serial1 = &uart14;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&lid_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			label = "lid";
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	hdmi-bridge {
+		compatible = "parade,ps185hdm";
+
+		pinctrl-0 = <&usb2_dp_hot_plug_detect>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_bridge_in: endpoint {
+					remote-endpoint = <&usb_2_qmpphy_out_dp>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_bridge_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_bridge_out>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,glymur-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left side port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+			};
+		};
+
+		/* Right side port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in1: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in1: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmh0101_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,glymur-sndcard";
+		model = "GLYMUR-HP-EliteBook-X-G2q";
+
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK1 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb";
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_e0_1p8>;
+		vddaon-supply = <&vreg_l15b_e0_1p8>;
+		vdddig-supply = <&vreg_l15b_e0_1p8>;
+		vddrfa1p2-supply = <&vreg_l15b_e0_1p8>;
+		vddrfa1p8-supply = <&vreg_l15b_e0_1p8>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmh0101-rpmh-regulators";
+		qcom,pmic-id = "B_E0";
+
+		vreg_l1b_e0_1p8: ldo1 {
+			regulator-name = "vreg_l1b_e0_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_e0_3p1: ldo7 {
+			regulator-name = "vreg_l7b_e0_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_e0_1p8: ldo15 {
+			regulator-name = "vreg_l15b_e0_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_e0_1p2: ldo18 {
+			regulator-name = "vreg_l18b_e0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmcx0102-rpmh-regulators";
+		qcom,pmic-id = "C_E1";
+
+		vreg_l1c_e1_0p91: ldo1 {
+			regulator-name = "vreg_l1c_e1_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "F_E0";
+
+		vreg_l2f_e0_0p94: ldo2 {
+			regulator-name = "vreg_l2f_e0_0p94";
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_e0_0p91: ldo3 {
+			regulator-name = "vreg_l3f_e0_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "F_E1";
+
+		vreg_l1f_e1_0p88: ldo1 {
+			regulator-name = "vreg_l1f_e1_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_e1_0p88: ldo2 {
+			regulator-name = "vreg_l2f_e1_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4f_e1_1p2: ldo4 {
+			regulator-name = "vreg_l4f_e1_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmh0110-rpmh-regulators";
+		qcom,pmic-id = "H_E0";
+
+		vreg_l1h_e0_0p94: ldo1 {
+			regulator-name = "vreg_l1h_e0_0p94";
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <936000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2h_e0_0p88: ldo2 {
+			regulator-name = "vreg_l2h_e0_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4h_e0_1p2: ldo4 {
+			regulator-name = "vreg_l4h_e0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <200>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_vamacro {
+	vdd-micb-supply = <&vreg_l1b_e0_1p8>;
+
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "samsung,atna33xc20";
+			enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l2f_e1_0p88>;
+	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l1c_e1_0p91>;
+	vdda-pll-supply = <&vreg_l4f_e1_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie5 {
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie5_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie5_phy {
+	vdda-phy-supply = <&vreg_l2f_e0_0p94>;
+	vdda-pll-supply = <&vreg_l4h_e0_1p2>;
+
+	status = "okay";
+};
+
+&pcie5_port0 {
+	reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pmh0101_gpios {
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-disable;
+	};
+};
+
+&pmk8850_rtc {
+	qcom,no-alarm;
+	qcom,uefi-rtc-info;
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/glymur/hp/elitebook-x-g2q/adsp.mbn",
+			"qcom/glymur/hp/elitebook-x-g2q/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/glymur/hp/elitebook-x-g2q/cdsp.mbn",
+			"qcom/glymur/hp/elitebook-x-g2q/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_soccp {
+	status = "okay";
+};
+
+&smb2370_j_e2_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_e0_1p8>;
+	vdd3-supply = <&vreg_l7b_e0_3p1>;
+};
+
+&smb2370_k_e2_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_e0_1p8>;
+	vdd3-supply = <&vreg_l7b_e0_3p1>;
+};
+
+/* SID-11 (smb2370_l) does not enumerate on this board; keep it disabled. */
+&smb2370_l_e2 {
+	status = "disabled";
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, left woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
+		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		qcom,port-mapping = <1 2 3 7 12 14>;
+	};
+
+	/* WSA8845, left tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
+		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		qcom,port-mapping = <4 5 6 7 13 15>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	/* WSA8845, right woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
+		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		qcom,port-mapping = <1 2 3 7 12 14>;
+	};
+
+	/* WSA8845, right tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_e0_1p8>;
+		vdd-io-supply = <&vreg_l18b_e0_1p2>;
+		qcom,port-mapping = <4 5 6 7 13 15>;
+	};
+};
+
+&tcsr {
+	vdda-qrefrpt0-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrpt1-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrpt2-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrpt3-0p9-supply = <&vreg_l2h_e0_0p88>;
+	vdda-qrefrpt4-0p9-supply = <&vreg_l2h_e0_0p88>;
+	vdda-qrefrx0-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrx1-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrx2-0p9-supply = <&vreg_l2f_e1_0p88>;
+	vdda-qrefrx4-0p9-supply = <&vreg_l2h_e0_0p88>;
+	vdda-qrefrx5-0p9-supply = <&vreg_l3f_e0_0p91>;
+	vdda-qreftx0-0p9-supply = <&vreg_l3f_e0_0p91>;
+	vdda-qreftx0-1p2-supply = <&vreg_l4h_e0_1p2>;
+	vdda-qreftx1-0p9-supply = <&vreg_l1f_e1_0p88>;
+	vdda-refgen3-0p9-supply = <&vreg_l2f_e0_0p94>;
+	vdda-refgen3-1p2-supply = <&vreg_l4h_e0_1p2>;
+	vdda-refgen4-0p9-supply = <&vreg_l1f_e1_0p88>;
+	vdda-refgen4-1p2-supply = <&vreg_l4f_e1_1p2>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <4 4>, /* EC TZ Secure I3C */
+			       <10 2>, /* OOB UART */
+			       <44 4>, /* Security SPI (TPM) */
+			       <65 1>; /* EC reset */
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	ts0_default: ts0-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	lid_default: lid-default-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_dp_hot_plug_detect: usb2-dp-hot-plug-detect-state {
+		pins = "gpio126";
+		function = "usb2_dp";
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie5_default: pcie5-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie5_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_0_hsphy {
+	vdd-supply = <&vreg_l3f_e0_0p91>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	phys = <&smb2370_j_e2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+	vdda-pll-supply = <&vreg_l3f_e0_0p91>;
+	refgen-supply = <&vreg_l2f_e0_0p94>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in1>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l3f_e0_0p91>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	phys = <&smb2370_k_e2_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+	vdda-pll-supply = <&vreg_l1h_e0_0p94>;
+	refgen-supply = <&vreg_l2f_e0_0p94>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in1>;
+};
+
+/* usb_2's combo PHY drives the HDMI bridge over DP; keep the dwc3 enabled. */
+&usb_2 {
+	maximum-speed = "high-speed";
+
+	phys = <&usb_2_hsphy>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l3f_e0_0p91>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy {
+	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+	vdda-pll-supply = <&vreg_l3f_e0_0p91>;
+	refgen-supply = <&vreg_l2f_e0_0p94>;
+
+	/delete-property/ mode-switch;
+	/delete-property/ orientation-switch;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/delete-node/ endpoint;
+
+			usb_2_qmpphy_out_dp: endpoint@0 {
+				reg = <0>;
+
+				data-lanes = <3 2 1 0>;
+				remote-endpoint = <&hdmi_bridge_in>;
+			};
+		};
+	};
+};
+
+/* Internal USB2 host for the Elan fingerprint reader (usb 04f3:0ca8). */
+&usb_hs {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	vdd-supply = <&vreg_l2h_e0_0p88>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	status = "okay";
+};
+
+/* Multiport host: port 0 = chassis USB-A, port 1 = internal USB HID. */
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2h_e0_0p88>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2h_e0_0p88>;
+	vdda12-supply = <&vreg_l4h_e0_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+	vdda-pll-supply = <&vreg_l2h_e0_0p88>;
+	refgen-supply = <&vreg_l4f_e1_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l4h_e0_1p2>;
+	vdda-pll-supply = <&vreg_l2h_e0_0p88>;
+	refgen-supply = <&vreg_l4f_e1_1p2>;
+
+	status = "okay";
+};

-- 
2.50.1


  parent reply	other threads:[~2026-08-09 21:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-09 21:29 [PATCH v3 0/3] X2 Elite HP EliteBook X G2q support Jason Pettit
2026-08-09 21:29 ` [PATCH v3 1/3] dt-bindings: arm: qcom: Add HP EliteBook X G2q 14 AI Jason Pettit
2026-08-09 21:29 ` Jason Pettit [this message]
2026-08-09 21:29 ` [PATCH v3 3/3] firmware: qcom: scm: Allow QSEECOM on " Jason Pettit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260809-glymur-send-v3-2-2d1ed10e3a89@oss.qualcomm.com \
    --to=jason.pettit@oss.qualcomm.com \
    --cc=akhilpo@oss.qualcomm.com \
    --cc=ananthu.cv@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jingyi.wang@oss.qualcomm.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mahadevan.p@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=sibi.sankar@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox