From: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>,
Rakesh Kota <rakesh.kota@oss.qualcomm.com>,
Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v5 0/4] arm64: dts: qcom: Add PMIC thermal support for Shikra platforms
Date: Sun, 09 Aug 2026 19:37:50 +0530 [thread overview]
Message-ID: <20260809-shikra_adc_support-v5-0-bf6882d18bad@oss.qualcomm.com> (raw)
This series adds the following:
- VADC and temp-alarm devices for PM4125 and temp-alarm device for PM8005
which are used for thermal mitigation on Shikra CQ2390M SoM platform
- ADC thermistor channels and thermal configurations for same on Shikra CQ2390M SoM
- ADC thermistor channels and their thermal configurations on Shikra IQ2390S SoM
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
---
Changes in v5:
- Collected Konrad's Reviewed-by tag on patch 2.
- Rebased to latest kernel tip.
- Link to v4: https://patch.msgid.link/20260715-shikra_adc_support-v4-0-5e07b6d21429@oss.qualcomm.com
Changes in v4:
- Collected Reviewed-by tags.
- Updated the pm8005-thermal trips to hot and critical.
- Link to v3: https://patch.msgid.link/20260710-shikra_adc_support-v3-0-ddc840fca0a0@oss.qualcomm.com
Changes in v3:
- Dropping the polling-delay = <0> property from all thermal-zones as suggested by Konrad.
- Link to v2: https://patch.msgid.link/20260709-shikra_adc_support-v2-0-8dda38f7bf3d@oss.qualcomm.com
Changes in v2:
- Move thermal zones to their respective PMIC files (PM4125, PM8005) as suggested by Dmitry Baryshkov
- Rename generic-adc-thermal bridge nodes to therm-bridge suffix (msm-therm-bridge, pa-therm-bridge,
quiet-therm-bridge) as suggested by Dmitry Baryshkov
- Update commit messages accordingly
- Link to v1: https://patch.msgid.link/20260613-shikra_adc_support-v1-0-57d5e6c7f47d@oss.qualcomm.com
---
Jishnu Prakash (4):
arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes
arm64: dts: qcom: pm8005: Add temp alarm node
arm64: dts: qcom: Add PMIC thermal support for Shikra CQ2390M SoM platform
arm64: dts: qcom: Add PMIC thermal support for Shikra IQ2390S SoM platform
arch/arm64/boot/dts/qcom/pm4125.dtsi | 104 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pm8005.dtsi | 35 ++++++++
arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 120 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 113 +++++++++++++++++++++++++
4 files changed, 372 insertions(+)
---
base-commit: 6b8c8af514d739d0335f5579b585e02babe8a727
change-id: 20260613-shikra_adc_support-0079650eb76c
Best regards,
--
Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
next reply other threads:[~2026-08-09 14:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-09 14:07 Jishnu Prakash [this message]
2026-08-09 14:07 ` [PATCH v5 1/4] arm64: dts: qcom: pm4125: Add VADC and temp alarm nodes Jishnu Prakash
2026-08-09 14:07 ` [PATCH v5 2/4] arm64: dts: qcom: pm8005: Add temp alarm node Jishnu Prakash
2026-08-09 14:07 ` [PATCH v5 3/4] arm64: dts: qcom: Add PMIC thermal support for Shikra CQ2390M SoM platform Jishnu Prakash
2026-08-09 14:31 ` sashiko-bot
2026-08-09 14:07 ` [PATCH v5 4/4] arm64: dts: qcom: Add PMIC thermal support for Shikra IQ2390S " Jishnu Prakash
2026-08-09 14:36 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260809-shikra_adc_support-v5-0-bf6882d18bad@oss.qualcomm.com \
--to=jishnu.prakash@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rakesh.kota@oss.qualcomm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox