From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm1-f51.google.com (mail-wm1-f51.google.com [209.85.128.51]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4A04E412261 for ; Tue, 11 Aug 2026 08:10:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.51 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786435811; cv=none; b=uSzetfJrfK+9xgkutZ3tmUTujFEUrWeMjtPJIomE5fbAQeRcJkDbPoZMJ5jbRpgDSSZyIKBwQ6CHpznB3OyPooAtGvlCMz5LFR0UXV6qOPIUkpWE2LK6zTwbKSiSFbtAMgLzGO7hEq3XG7G21Esc1vc+Wpm1leE/SoTpTrgTcQs= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786435811; c=relaxed/simple; bh=pRywqyjcN+s9xqw6lT2yIXo8H0f36+MeGHolX/N/5LE=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=TsxtwmTsQr/g8k/26tBFCBhTYMF6uBXkxaIXAW0aJyMlYSzF6uOvmF6m4OgccrhAWfuudesVdutQKAMUKMtgvp/QXQGPRREy55tmx+oGddP2bLtq2FUZ2cDmDUqcp2496zi7SGngylZZKZipPUZwQkzxwAk8+AFOpdcQ6Tnee14= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=bv9ajNIS; arc=none smtp.client-ip=209.85.128.51 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="bv9ajNIS" Received: by mail-wm1-f51.google.com with SMTP id 5b1f17b1804b1-4980dc26022so28263685e9.1 for ; Tue, 11 Aug 2026 01:10:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1786435807; x=1787040607; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to:content-type; bh=t7y42iTAOFamntAXZPdzptkHEiwN6mZNRtIqENKnw0w=; b=bv9ajNISe9OuW4WpKRN9GwafsNwSUPkw/NMqWmacLBF/YSNysqWvywE9Oul0NGS6iA 9tO7n1aHBbShS7nQg3+Vy59lPMSsndOZQP+MLTCCpy7eiR1+IZnMzQH5LoE1jk7vA8MU G2PCSA6lScDtADBIJToUy0L5Gc4mPX+e33anl1XIM7TdShstC56o2k0c90n6DOvZbirf l3kb6vYGTXAVVBXnf082bbhd29nadkXcVSMfSkWmvnK35SsmTPNCRHLfZaJUzMUtGJi+ TWhhyH9wCMfx9fOpQ9UiavehgO4yZDADJ7iFnJtURDSTlTstnZENO7CrBb/R3Ghb4ZNG J/9Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1786435807; x=1787040607; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-gg:x-gm-message-state:from:to :cc:subject:date:message-id:reply-to:content-type; bh=t7y42iTAOFamntAXZPdzptkHEiwN6mZNRtIqENKnw0w=; b=lTkd/0WOpwcrUrsKlUHygB7MoljrFB32PpQbR5be+oC7JWQhtHuKkAJIp7ClYNlxxK p68khtqbaIZmb7EpjZElDuh68SW8GqJhwfu8ERgM7GOq48vS68/aXasgi9qFaJffI/u8 e2LtleKyQ424sx8PWTatEDTPBy7NuxGVIQueF1X7Pdb3L4CwGK2ARX+KsyWIvr8gvN74 B7Y4DiFsyjj1doER6UMBPP00vWUVADtYMgRuDbcFGZdVQ4JPI+uP2Mp8/lHR3TE4eQYV M3KxiWRxr9+t8RZ1HWjrlXNRck349n9kbbTYqLety0hxfTWwGVq7hLWBoN016pU4qb+2 1iRQ== X-Forwarded-Encrypted: i=1; AHgh+RonLC6Qj1KZQj28lc/pE3SsZ2N8Lt6FgBXlcIxvodEZvtINnSX8HMzfe67fnHlVfDrIToney11AwQyB@vger.kernel.org X-Gm-Message-State: AOJu0YyTJRQhBqsYhvwLdWkbRo2jIiyfdpA+Ygsq1Vnh8SJYr18Hm2MK aligRVrfBGNm1bt2z9FYHZRMSrB324rC3+G5G/4lstNwpcxBlh7Y/yoj X-Gm-Gg: AR+sD10kmOzDqW3pqyLUqvEAk4xZm7bcXLE36OhCLR1dWiKuZfj/ni4Ixy0rXlgz7e3 bTZYAEVrZOzW0g8UU/DA3awFFPFsudlSTa1/cIP8fs6BVIjZ+Myn1kDgLfonJap9vjgZ7C6gU64 WEAnhlImvFaqw4vF4UoXBNHemCn/cXvkRz/6riErS7cOJLWem9yaJpzbYApZdEnPuzeP/9dpMfY fK7LukMxnqfZfH5DG04ZXTF3S4rYkZACHoopCe9lvtQIq4NVfz+3VLg3bD6DJ/Qz+5QEcJ7ltIw b05CrQGWDMTUr+IL+yChOgi/pAPglBvrygvzh9tsfvLxveiPz4BluZ8poNOKhvlK7FMF3Po5B0+ Sf4j2av39mXQbWwBSgoDUTCHXUbrOzo66BordOZtyTk18NRd7AXGigS1/IdRVJemGi6Py8u5B36 DTQv28bjdhK5TEPj1mSsJoC4mM5JGS+Q38+vP1Zy3Ww0tP/JSSPxBsRwYXs7tLu6qHsaJFVbiwp hXXOTPNIn+YX7mn0IChbrUdO3dEj7k3hi6pagDsCT6wfQjKINgiWLDP0II= X-Received: by 2002:a05:600c:4ecd:b0:498:ff3:71ed with SMTP id 5b1f17b1804b1-4997913e137mr9703225e9.17.1786435807466; Tue, 11 Aug 2026 01:10:07 -0700 (PDT) Received: from Ansuel-XPS24.localdomain (host-87-20-3-207.retail.telecomitalia.it. [87.20.3.207]) by smtp.googlemail.com with ESMTPSA id 5b1f17b1804b1-49977df9489sm45336675e9.1.2026.08.11.01.10.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 11 Aug 2026 01:10:06 -0700 (PDT) From: Christian Marangi To: Greg Kroah-Hartman , Jiri Slaby , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Andy Shevchenko , =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= , Benjamin Larsson , Christian Marangi , John Ogness , Manuel Lauss , Haowei Zheng , Binbin Zhou , Rong Zhang , Randy Dunlap , Gerhard Engleder , Lubomir Rintel , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v6 3/3] serial: 8250: Add Airoha SoC UART and HSUART support Date: Tue, 11 Aug 2026 10:09:48 +0200 Message-ID: <20260811080950.664379-4-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.53.0 In-Reply-To: <20260811080950.664379-1-ansuelsmth@gmail.com> References: <20260811080950.664379-1-ansuelsmth@gmail.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add support for Airoha AN7523 UART and AN7581 HSUART. These implement a standard 16550 UART with only some custom logic for baud rate handling. Co-developed-by: Benjamin Larsson Signed-off-by: Benjamin Larsson Reviewed-by: Andy Shevchenko Signed-off-by: Christian Marangi --- drivers/tty/serial/8250/8250.h | 6 + drivers/tty/serial/8250/8250_airoha.c | 187 ++++++++++++++++++++++++++ drivers/tty/serial/8250/8250_port.c | 16 +++ drivers/tty/serial/8250/Kconfig | 11 ++ drivers/tty/serial/8250/Makefile | 1 + 5 files changed, 221 insertions(+) create mode 100644 drivers/tty/serial/8250/8250_airoha.c diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 77fe0588fd6b..e6b2b9431229 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -73,6 +73,12 @@ struct serial8250_config { unsigned int flags; }; +enum uart_port_type { + /* Internal 8250 only */ + UART_PORT_AIROHA = 124, + UART_PORT_AIROHA_HS = 125, +}; + #define UART_CAP_FIFO BIT(8) /* UART has FIFO */ #define UART_CAP_EFR BIT(9) /* UART has EFR */ #define UART_CAP_SLEEP BIT(10) /* UART has IER sleep */ diff --git a/drivers/tty/serial/8250/8250_airoha.c b/drivers/tty/serial/8250/8250_airoha.c new file mode 100644 index 000000000000..fe72a39561c2 --- /dev/null +++ b/drivers/tty/serial/8250/8250_airoha.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Airoha UART driver + * + * Copyright (c) 2025 Genexis Sweden AB + * Author: Benjamin Larsson + * Christian Marangi + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#define UART_AIROHA_XINCLKDR 10 +#define UART_AIROHA_XYD 11 +#define UART_AIROHA_XYD_X GENMASK(31, 16) +#define UART_AIROHA_XYD_Y GENMASK(15, 0) + +struct airoha_8250_priv { + int line; +}; + +#define UART_BRD_20M 0x0001 + +#define XINDIV_CLOCK (20 * HZ_PER_MHZ) +#define XYD_Y 65000 + +static const unsigned int airoha_clk_divs[] = { 2, 4, 10 }; + +static unsigned int airoha_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) +{ + /* Hardware always uses BRDIV = 1. */ + *frac = 0; + + return UART_BRD_20M; +} + +/* + * Airoha UART baud rate calculation logic + * + * crystal_clock = 20 MHz (fixed frequency) + * xindiv_clock = crystal_clock / clock_div + * (x/y) = XYD, 32 bit register with 16 bits of x and then 16 bits of y + * clock_div = XINCLK_DIVCNT (default set to 10 (0x4)), + * - 3 bit register [ 1, 2, 4, 8, 10, 12, 16, 20 ] + * + * baud_rate = ((xindiv_clock) * (x/y)) / ([BRDH,BRDL] * 16) + * + * Selecting divider needs to fulfill + * 1.8432 MHz <= xindiv_clk <= APB clock / 2 + * The clocks are unknown but a divider of value 1 did not result in a valid + * waveform. + * + * XYD_y seems to need to be larger then XYD_x for proper waveform generation. + * Setting [BRDH,BRDL] to [0,1] and XYD_y to 65000 gives even values + * for usual baud rates. + */ +static void airoha_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u32 xindiv_clk; + u64 xyd_x, nom; + int div_bit; + + /* Set baud rate calculation defaults (BRDIV [BRDH,BRDL] to 1) */ + serial8250_do_set_divisor(port, baud, UART_BRD_20M); + + /* + * Calculate XYD_x and XINCLKDR register by searching + * through a table of crystal_clock divisors. + */ + nom = (u64)baud * XYD_Y; + for (div_bit = ARRAY_SIZE(airoha_clk_divs) - 1; div_bit >= 0; div_bit--) { + unsigned int div = airoha_clk_divs[div_bit]; + + xindiv_clk = XINDIV_CLOCK / div; + xyd_x = div_u64(nom * 16, xindiv_clk); + + /* For the HSUART xyd_x needs to be scaled by a factor of 2 */ + if (port->type == UART_PORT_AIROHA_HS) + xyd_x /= 2; + + if (xyd_x < XYD_Y) + break; + } + + /* Couldn't find a valid xyd_x */ + if (div_bit < 0) { + dev_err(port->dev, "failed to find suitable clock divisor for baud %u\n", + baud); + return; + } + + serial_port_out(port, UART_AIROHA_XINCLKDR, BIT(div_bit)); + serial_port_out(port, UART_AIROHA_XYD, + FIELD_PREP(UART_AIROHA_XYD_X, xyd_x) | + FIELD_PREP(UART_AIROHA_XYD_Y, XYD_Y)); + + /* Restore normal register access. */ + serial_port_out(port, UART_LCR, up->lcr); +} + +static int airoha_8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = { }; + struct device *dev = &pdev->dev; + struct airoha_8250_priv *priv; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return dev_err_probe(dev, -EINVAL, "invalid address\n"); + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + uart.port.dev = dev; + if (device_is_compatible(dev, "airoha,an7581-hsuart")) + uart.port.type = UART_PORT_AIROHA_HS; + else + uart.port.type = UART_PORT_AIROHA; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | + UPF_FIXED_TYPE | UPF_IOREMAP; + uart.port.set_divisor = airoha_set_divisor; + uart.port.get_divisor = airoha_get_divisor; + uart.port.mapbase = res->start; + uart.port.mapsize = resource_size(res); + + ret = uart_read_and_validate_port_properties(&uart.port); + if (ret) + return ret; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) + return ret; + + priv->line = ret; + platform_set_drvdata(pdev, priv); + + return 0; +} + +static void airoha_8250_remove(struct platform_device *ofdev) +{ + struct airoha_8250_priv *priv = platform_get_drvdata(ofdev); + + serial8250_unregister_port(priv->line); +} + +static const struct of_device_id airoha_8250_dt_ids[] = { + { .compatible = "airoha,en7523-uart" }, + { .compatible = "airoha,an7581-hsuart" }, + { } +}; +MODULE_DEVICE_TABLE(of, airoha_8250_dt_ids); + +static struct platform_driver airoha_8250_driver = { + .driver = { + .name = "8250_airoha", + .of_match_table = airoha_8250_dt_ids, + }, + .probe = airoha_8250_probe, + .remove = airoha_8250_remove, +}; +module_platform_driver(airoha_8250_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Airoha UART driver"); +MODULE_AUTHOR("Benjamin Larsson "); +MODULE_AUTHOR("Christian Marangi "); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 630deb7dd344..c888cae7d98b 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -311,6 +311,22 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 8, 16, 30}, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [UART_PORT_AIROHA] = { + .name = "Airoha UART", + .fifo_size = 8, + .tx_loadsz = 1, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_CLEAR_RCVR, + .rxtrig_bytes = {1, 4, 4, 4}, + .flags = UART_CAP_FIFO, + }, + [UART_PORT_AIROHA_HS] = { + .name = "Airoha HSUART", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | UART_FCR_CLEAR_RCVR, + .rxtrig_bytes = {1, 4}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index fc3e58d62233..310da7af7a49 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -337,6 +337,17 @@ config SERIAL_8250_ACORN system, say Y to this option. The driver can handle 1, 2, or 3 port cards. If unsure, say N. +config SERIAL_8250_AIROHA + tristate "Airoha UART support" + depends on ARCH_AIROHA || COMPILE_TEST + depends on SERIAL_8250 + help + Selecting this option enables an Airoha SoC specific baud rate + calculation routine on an otherwise 16550 compatible UART hardware. + + If you have an Airoha based board and want to use the serial port, + say Y to this option. If unsure, say N. + config SERIAL_8250_BCM2835AUX tristate "BCM2835 auxiliar mini UART support" depends on ARCH_BCM2835 || COMPILE_TEST diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 6d21402b4435..83257696ea8a 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_AIROHA) += 8250_airoha.o obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o obj-$(CONFIG_SERIAL_8250_BCM7271) += 8250_bcm7271.o -- 2.53.0