[PATCH v4 2/2] arm64: dts: ti: k3-am62l3-evm: Add HDMI support

[Swamil Jain <s-jain1@ti.com>]

From: Devarsh Thakkar <devarsht@ti.com>

Add the SII9022 HDMI bridge and HDMI connector nodes, along with the
DPI pinmux configuration connecting VOUT0 to the bridge. Enable the DSS
and hook up its DPI output port to the SII9022 bridge input, and the
bridge output to the HDMI connector.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 95 ++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
index 84a0cfaaf196..477de9de07e8 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
@@ -44,6 +44,18 @@ usr: button-usr {
 		};
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -192,6 +204,38 @@ exp2: gpio@23 {
 		bootph-all;
 	};
 
+	sii9022: bridge-hdmi@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		interrupt-parent = <&exp1>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 >;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dpi_pins_default>;
+		bootph-all;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -221,6 +265,41 @@ usb_con_hs: endpoint {
 };
 
 &pmx0 {
+	dpi_pins_default: dpi-default-pins {
+		pinctrl-single,pins = <
+			AM62LX_IOPAD(0x00e4, PIN_OUTPUT, 1) /* (L20) GPMC0_CSn0.VOUT0_VSYNC */
+			AM62LX_IOPAD(0x00dc, PIN_OUTPUT, 1) /* (N21) GPMC0_WPn.VOUT0_HSYNC */
+			AM62LX_IOPAD(0x00e8, PIN_OUTPUT, 1) /* (L19) GPMC0_CSn1.VOUT0_PCLK */
+			AM62LX_IOPAD(0x00e0, PIN_OUTPUT, 1) /* (M21) GPMC0_DIR.VOUT0_DE */
+			AM62LX_IOPAD(0x0078, PIN_OUTPUT, 1) /* (L22) GPMC0_AD0.VOUT0_DATA0 */
+			AM62LX_IOPAD(0x007c, PIN_OUTPUT, 1) /* (L23) GPMC0_AD1.VOUT0_DATA1 */
+			AM62LX_IOPAD(0x0080, PIN_OUTPUT, 1) /* (K22) GPMC0_AD2.VOUT0_DATA2 */
+			AM62LX_IOPAD(0x0084, PIN_OUTPUT, 1) /* (J23) GPMC0_AD3.VOUT0_DATA3 */
+			AM62LX_IOPAD(0x0088, PIN_OUTPUT, 1) /* (K23) GPMC0_AD4.VOUT0_DATA4 */
+			AM62LX_IOPAD(0x008c, PIN_OUTPUT, 1) /* (H22) GPMC0_AD5.VOUT0_DATA5 */
+			AM62LX_IOPAD(0x0090, PIN_OUTPUT, 1) /* (H23) GPMC0_AD6.VOUT0_DATA6 */
+			AM62LX_IOPAD(0x0094, PIN_OUTPUT, 1) /* (J22) GPMC0_AD7.VOUT0_DATA7 */
+			AM62LX_IOPAD(0x0098, PIN_OUTPUT, 1) /* (H19) GPMC0_AD8.VOUT0_DATA8 */
+			AM62LX_IOPAD(0x009c, PIN_OUTPUT, 1) /* (H20) GPMC0_AD9.VOUT0_DATA9 */
+			AM62LX_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (H21) GPMC0_AD10.VOUT0_DATA10 */
+			AM62LX_IOPAD(0x00a4, PIN_OUTPUT, 1) /* (H18) GPMC0_AD11.VOUT0_DATA11 */
+			AM62LX_IOPAD(0x00a8, PIN_OUTPUT, 1) /* (G23) GPMC0_AD12.VOUT0_DATA12 */
+			AM62LX_IOPAD(0x00ac, PIN_OUTPUT, 1) /* (G22) GPMC0_AD13.VOUT0_DATA13 */
+			AM62LX_IOPAD(0x00b0, PIN_OUTPUT, 1) /* (F22) GPMC0_AD14.VOUT0_DATA14 */
+			AM62LX_IOPAD(0x00b4, PIN_OUTPUT, 1) /* (F23) GPMC0_AD15.VOUT0_DATA15 */
+			AM62LX_IOPAD(0x00b8, PIN_OUTPUT, 1) /* (L21) GPMC0_CLK.VOUT0_DATA16 */
+			AM62LX_IOPAD(0x00c0, PIN_OUTPUT, 1) /* (N19) GPMC0_ADVn_ALE.VOUT0_DATA17 */
+			AM62LX_IOPAD(0x00c4, PIN_OUTPUT, 1) /* (N20) GPMC0_OEn_REn.VOUT0_DATA18 */
+			AM62LX_IOPAD(0x00c8, PIN_OUTPUT, 1) /* (M19) GPMC0_WEn.VOUT0_DATA19 */
+			AM62LX_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (P23) GPMC0_BE0n_CLE.VOUT0_DATA20 */
+			AM62LX_IOPAD(0x00d0, PIN_OUTPUT, 1) /* (P22) GPMC0_BE1n.VOUT0_DATA21 */
+			AM62LX_IOPAD(0x00d4, PIN_OUTPUT, 1) /* (N23) GPMC0_WAIT0.VOUT0_DATA22 */
+			AM62LX_IOPAD(0x00d8, PIN_OUTPUT, 1) /* (N22) GPMC0_WAIT1.VOUT0_DATA23 */
+			AM62LX_IOPAD(0x00ec, PIN_INPUT,  5) /* (M23) GPMC0_CSn2.VOUT0_EXTPCLKIN */
+		>;
+		bootph-all;
+	};
+
 	gpio0_ioexp_intr_pins_default: gpio0-ioexp-intr-default-pins {
 		pinctrl-single,pins = <
 			AM62LX_IOPAD(0x01b0, PIN_INPUT, 7) /* (B12) SPI0_D1.GPIO0_91 */
@@ -321,6 +400,22 @@ AM62LX_IOPAD(0x0004, PIN_OUTPUT, 0) /* (AA23) WKUP_UART0_TXD */
 	};
 };
 
+&dss {
+	status = "okay";
+	bootph-all;
+};
+
+&dss_ports {
+	/* VP1: DPI Output */
+	port@0 {
+		reg = <0>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &sdhci0 {
 	/* eMMC */
 	pinctrl-names = "default";