From: Lee Jones <lee@kernel.org>
To: Svyatoslav Ryhel <clamor95@gmail.com>,
Jonathan Cameron <jic23@kernel.org>
Cc: "Daniel Thompson" <danielt@kernel.org>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Pavel Machek" <pavel@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Helge Deller" <deller@gmx.de>, "Johan Hovold" <johan@kernel.org>,
dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org, mfd@lists.linux.dev,
linux-fbdev@vger.kernel.org
Subject: Re: [PATCH v6 08/14] mfd: lm3533: Convert to use OF bindings
Date: Tue, 11 Aug 2026 20:11:32 +0100 [thread overview]
Message-ID: <20260811191132.GA1072730@google.com> (raw)
In-Reply-To: <20260731113632.158440-9-clamor95@gmail.com>
Jonathan,
IIO ack please, mate.
> Since there are no users of this driver via platform data, remove the
> platform data support and switch to using Device Tree bindings.
>
> Previously, all cell devices were linked to the parent device. This could
> cause problems further down the line because the LM3533 has multiple cells
> of the same type. Using a single phandle to the parent could cause
> confusion when attempting to reference or call the correct child node.
> Since this commit adds a dedicated node for every cell, remove linking of
> the cell to the parent node.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org> #for backlight
> ---
> drivers/iio/light/lm3533-als.c | 66 +++++---
> drivers/leds/leds-lm3533.c | 47 ++++--
> drivers/mfd/lm3533-core.c | 237 ++++++++++++----------------
> drivers/mfd/lm3533-ctrlbank.c | 5 -
> drivers/video/backlight/lm3533_bl.c | 54 +++++--
> include/linux/mfd/lm3533.h | 52 +-----
> 6 files changed, 217 insertions(+), 244 deletions(-)
>
> diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
> index 55c35018704c8..4870e8050088b 100644
> --- a/drivers/iio/light/lm3533-als.c
> +++ b/drivers/iio/light/lm3533-als.c
> @@ -17,15 +17,17 @@
> #include <linux/mutex.h>
> #include <linux/mfd/core.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> +#include <linux/units.h>
>
> #include <linux/mfd/lm3533.h>
>
>
> -#define LM3533_ALS_RESISTOR_MIN 1
> -#define LM3533_ALS_RESISTOR_MAX 127
> +#define LM3533_ALS_RESISTOR_MIN_OHMS 1575
> +#define LM3533_ALS_RESISTOR_MAX_OHMS 200000
> #define LM3533_ALS_CHANNEL_CURRENT_MAX 2
> #define LM3533_ALS_THRESH_MAX 3
> #define LM3533_ALS_ZONE_MAX 4
> @@ -57,6 +59,9 @@ struct lm3533_als {
>
> atomic_t zone;
> struct mutex thresh_mutex;
> +
> + u32 r_select;
> + bool pwm_mode;
> };
>
>
> @@ -403,7 +408,7 @@ static ssize_t show_thresh_either_en(struct device *dev,
> int enable;
> int ret;
>
> - if (als->irq) {
> + if (als->irq > 0) {
> ret = lm3533_als_get_int_mode(indio_dev, &enable);
> if (ret)
> return ret;
> @@ -425,7 +430,7 @@ static ssize_t store_thresh_either_en(struct device *dev,
> u8 zone;
> int ret;
>
> - if (!als->irq)
> + if (als->irq <= 0)
> return -EBUSY;
>
> if (kstrtoul(buf, 0, &enable))
> @@ -708,29 +713,38 @@ static const struct attribute_group lm3533_als_attribute_group = {
> .attrs = lm3533_als_attributes
> };
>
> -static int lm3533_als_setup(struct lm3533_als *als,
> - const struct lm3533_als_platform_data *pdata)
> +static int lm3533_als_setup(struct lm3533_als *als)
> {
> struct device *dev = &als->pdev->dev;
> int ret;
>
> + als->pwm_mode = device_property_read_bool(dev, "ti,pwm-mode");
> +
> ret = regmap_assign_bits(als->regmap, LM3533_REG_ALS_CONF,
> - LM3533_ALS_INPUT_MODE_MASK, pdata->pwm_mode);
> + LM3533_ALS_INPUT_MODE_MASK, als->pwm_mode);
> if (ret)
> return dev_err_probe(dev, ret, "failed to set input mode %d\n",
> - pdata->pwm_mode);
> + als->pwm_mode);
>
> /* ALS input is always high impedance in PWM-mode. */
> - if (pdata->pwm_mode)
> + if (als->pwm_mode)
> return 0;
>
> - if (pdata->r_select < LM3533_ALS_RESISTOR_MIN ||
> - pdata->r_select > LM3533_ALS_RESISTOR_MAX)
> + ret = device_property_read_u32(dev, "ti,resistor-ohms",
> + &als->r_select);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to ger resistor value\n");
> +
> + if (als->r_select < LM3533_ALS_RESISTOR_MIN_OHMS ||
> + als->r_select > LM3533_ALS_RESISTOR_MAX_OHMS)
> return dev_err_probe(dev, -EINVAL,
> "invalid resistor value\n");
>
> + als->r_select = DIV_ROUND_UP(2 * MICRO, 10 * als->r_select);
> +
> ret = regmap_write(als->regmap, LM3533_REG_ALS_RESISTOR_SELECT,
> - pdata->r_select);
> + als->r_select);
> if (ret)
> return dev_err_probe(dev, ret, "failed to set resistor\n");
>
> @@ -793,7 +807,6 @@ static const struct iio_info lm3533_als_info = {
>
> static int lm3533_als_probe(struct platform_device *pdev)
> {
> - const struct lm3533_als_platform_data *pdata;
> struct lm3533 *lm3533;
> struct lm3533_als *als;
> struct iio_dev *indio_dev;
> @@ -803,12 +816,6 @@ static int lm3533_als_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*als));
> if (!indio_dev)
> return -ENOMEM;
> @@ -817,25 +824,27 @@ static int lm3533_als_probe(struct platform_device *pdev)
> indio_dev->channels = lm3533_als_channels;
> indio_dev->num_channels = ARRAY_SIZE(lm3533_als_channels);
> indio_dev->name = dev_name(&pdev->dev);
> - iio_device_set_parent(indio_dev, pdev->dev.parent);
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> als = iio_priv(indio_dev);
> als->regmap = lm3533->regmap;
> als->pdev = pdev;
> - als->irq = lm3533->irq;
> + als->irq = platform_get_irq_optional(pdev, 0);
> + if (als->irq == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> atomic_set(&als->zone, 0);
> mutex_init(&als->thresh_mutex);
>
> platform_set_drvdata(pdev, indio_dev);
>
> - if (als->irq) {
> + if (als->irq > 0) {
> ret = lm3533_als_setup_irq(als, indio_dev);
> if (ret)
> return ret;
> }
>
> - ret = lm3533_als_setup(als, pdata);
> + ret = lm3533_als_setup(als);
> if (ret)
> goto err_free_irq;
>
> @@ -854,7 +863,7 @@ static int lm3533_als_probe(struct platform_device *pdev)
> err_disable:
> lm3533_als_disable(als);
> err_free_irq:
> - if (als->irq)
> + if (als->irq > 0)
> free_irq(als->irq, indio_dev);
>
> return ret;
> @@ -868,13 +877,20 @@ static void lm3533_als_remove(struct platform_device *pdev)
> lm3533_als_set_int_mode(indio_dev, false);
> iio_device_unregister(indio_dev);
> lm3533_als_disable(als);
> - if (als->irq)
> + if (als->irq > 0)
> free_irq(als->irq, indio_dev);
> }
>
> +static const struct of_device_id lm3533_als_match_table[] = {
> + { .compatible = "ti,lm3533-als" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_als_match_table);
> +
> static struct platform_driver lm3533_als_driver = {
> .driver = {
> .name = "lm3533-als",
> + .of_match_table = lm3533_als_match_table,
> },
> .probe = lm3533_als_probe,
> .remove = lm3533_als_remove,
> diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
> index 0cb0585eb9600..7259097bd6a71 100644
> --- a/drivers/leds/leds-lm3533.c
> +++ b/drivers/leds/leds-lm3533.c
> @@ -12,6 +12,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
>
> @@ -50,6 +51,9 @@ struct lm3533_led {
> struct mutex mutex;
> unsigned long flags;
>
> + u32 max_current;
> + u32 pwm;
> +
> bool have_als;
> };
>
> @@ -616,22 +620,20 @@ static const struct attribute_group *lm3533_led_attribute_groups[] = {
> NULL
> };
>
> -static int lm3533_led_setup(struct lm3533_led *led,
> - struct lm3533_led_platform_data *pdata)
> +static int lm3533_led_setup(struct lm3533_led *led)
> {
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
> + ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&led->cb, led->pwm);
> }
>
> static int lm3533_led_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_led_platform_data *pdata;
> struct lm3533_led *led;
> int ret;
>
> @@ -641,12 +643,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
> return -EINVAL;
> @@ -659,8 +655,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
> led->regmap = lm3533->regmap;
> led->have_als = lm3533->have_als;
>
> - led->cdev.name = pdata->name;
> - led->cdev.default_trigger = pdata->default_trigger;
> led->cdev.brightness_set_blocking = lm3533_led_set;
> led->cdev.brightness_get = lm3533_led_get;
> led->cdev.blink_set = lm3533_led_blink_set;
> @@ -668,6 +662,15 @@ static int lm3533_led_probe(struct platform_device *pdev)
> led->cdev.groups = lm3533_led_attribute_groups;
> led->id = pdev->id;
>
> + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
> + pdev->name, led->id);
> + if (!led->cdev.name)
> + return -ENOMEM;
> +
> + led->cdev.default_trigger = "none";
> + device_property_read_string(&pdev->dev, "linux,default-trigger",
> + &led->cdev.default_trigger);
> +
> mutex_init(&led->mutex);
>
> /* The class framework makes a callback to get brightness during
> @@ -680,7 +683,7 @@ static int lm3533_led_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, led);
>
> - ret = led_classdev_register(pdev->dev.parent, &led->cdev);
> + ret = led_classdev_register(&pdev->dev, &led->cdev);
> if (ret) {
> dev_err(&pdev->dev, "failed to register LED %d\n", pdev->id);
> return ret;
> @@ -688,7 +691,14 @@ static int lm3533_led_probe(struct platform_device *pdev)
>
> led->cb.dev = led->cdev.dev;
>
> - ret = lm3533_led_setup(led, pdata);
> + device_property_read_u32(&pdev->dev, "led-max-microamp",
> + &led->max_current);
> + led->max_current = clamp(led->max_current, LM3533_MAX_CURRENT_MIN,
> + LM3533_MAX_CURRENT_MAX);
> +
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &led->pwm);
> +
> + ret = lm3533_led_setup(led);
> if (ret)
> goto err_deregister;
>
> @@ -725,9 +735,16 @@ static void lm3533_led_shutdown(struct platform_device *pdev)
> lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
> }
>
> +static const struct of_device_id lm3533_led_match_table[] = {
> + { .compatible = "ti,lm3533-leds" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_led_match_table);
> +
> static struct platform_driver lm3533_led_driver = {
> .driver = {
> .name = "lm3533-leds",
> + .of_match_table = lm3533_led_match_table,
> },
> .probe = lm3533_led_probe,
> .remove = lm3533_led_remove,
> diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
> index 53b87958c2c68..c7c7e71719ae0 100644
> --- a/drivers/mfd/lm3533-core.c
> +++ b/drivers/mfd/lm3533-core.c
> @@ -15,16 +15,23 @@
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/mfd/core.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> +#include <linux/units.h>
>
> #include <linux/mfd/lm3533.h>
>
>
> #define LM3533_BOOST_OVP_MASK 0x06
> +#define LM3533_BOOST_OVP_MIN (16 * MICRO)
> +#define LM3533_BOOST_OVP_MAX (40 * MICRO)
> +
> #define LM3533_BOOST_FREQ_MASK 0x01
> +#define LM3533_BOOST_FREQ_MIN (500 * HZ_PER_KHZ)
> +#define LM3533_BOOST_FREQ_MAX (1000 * HZ_PER_KHZ)
>
> #define LM3533_BL_ID_MASK 1
> #define LM3533_LED_ID_MASK 3
> @@ -33,6 +40,7 @@
>
> #define LM3533_HVLED_ID_MAX 2
> #define LM3533_LVLED_ID_MAX 5
> +#define LM3533_CELLS_MAX 7
>
> #define LM3533_REG_OUTPUT_CONF1 0x10
> #define LM3533_REG_OUTPUT_CONF2 0x11
> @@ -40,44 +48,6 @@
>
> #define LM3533_REG_MAX 0xb2
>
> -
> -static struct mfd_cell lm3533_als_devs[] = {
> - {
> - .name = "lm3533-als",
> - .id = -1,
> - },
> -};
> -
> -static struct mfd_cell lm3533_bl_devs[] = {
> - {
> - .name = "lm3533-backlight",
> - .id = 0,
> - },
> - {
> - .name = "lm3533-backlight",
> - .id = 1,
> - },
> -};
> -
> -static struct mfd_cell lm3533_led_devs[] = {
> - {
> - .name = "lm3533-leds",
> - .id = 0,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 1,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 2,
> - },
> - {
> - .name = "lm3533-leds",
> - .id = 3,
> - },
> -};
> -
> /*
> * HVLED output config -- output hvled controlled by backlight bl
> */
> @@ -299,125 +269,92 @@ static const struct attribute_group *lm3533_attribute_groups[] = {
> NULL,
> };
>
> -static int lm3533_device_als_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int ret;
> -
> - if (!pdata->als)
> - return 0;
> -
> - lm3533_als_devs[0].platform_data = pdata->als;
> - lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
> - 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add ALS device\n");
> - return ret;
> - }
> -
> - lm3533->have_als = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_bl_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->backlights || pdata->num_backlights == 0)
> - return 0;
> -
> - if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
> - pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
> -
> - for (i = 0; i < pdata->num_backlights; ++i) {
> - lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
> - lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
> - pdata->num_backlights, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add backlight devices\n");
> - return ret;
> - }
> -
> - lm3533->have_backlights = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_led_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->leds || pdata->num_leds == 0)
> - return 0;
> -
> - if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
> - pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
> -
> - for (i = 0; i < pdata->num_leds; ++i) {
> - lm3533_led_devs[i].platform_data = &pdata->leds[i];
> - lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
> - pdata->num_leds, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add LED devices\n");
> - return ret;
> - }
> -
> - lm3533->have_leds = 1;
> -
> - return 0;
> -}
> -
> static int lm3533_device_init(struct lm3533 *lm3533)
> {
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> + struct device *dev = lm3533->dev;
> + struct mfd_cell *lm3533_devices;
> + u32 reg, nchilds;
> + u32 count = 0;
> int ret;
>
> - dev_dbg(lm3533->dev, "%s\n", __func__);
> + nchilds = device_get_child_node_count(dev);
> + if (!nchilds || nchilds > LM3533_CELLS_MAX)
> + return dev_err_probe(dev, -ENODEV,
> + "num of child nodes is not supported\n");
>
> - if (!pdata) {
> - dev_err(lm3533->dev, "no platform data\n");
> - return -EINVAL;
> - }
> + lm3533_devices = devm_kcalloc(dev, nchilds, sizeof(*lm3533_devices),
> + GFP_KERNEL);
> + if (!lm3533_devices)
> + return -ENOMEM;
>
> - lm3533->hwen = devm_gpiod_get(lm3533->dev, NULL, GPIOD_OUT_LOW);
> - if (IS_ERR(lm3533->hwen))
> - return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen), "failed to request HWEN GPIO\n");
> - gpiod_set_consumer_name(lm3533->hwen, "lm3533-hwen");
> + device_for_each_child_node_scoped(dev, child) {
> + if (count >= nchilds)
> + break;
> +
> + if (fwnode_device_is_compatible(child, "ti,lm3533-als")) {
> + lm3533_devices[count].name = "lm3533-als";
> + lm3533_devices[count].of_compatible = "ti,lm3533-als";
> + lm3533_devices[count].id = PLATFORM_DEVID_NONE;
> +
> + lm3533->have_als = true;
> + count++;
> + } else if (fwnode_device_is_compatible(child, "ti,lm3533-backlight")) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret || reg >= LM3533_HVLED_ID_MAX) {
> + dev_err(dev, "invalid backlight node %pfw\n", child);
> + continue;
> + }
> +
> + lm3533_devices[count].name = "lm3533-backlight";
> + lm3533_devices[count].of_compatible = "ti,lm3533-backlight";
> + lm3533_devices[count].id = reg;
> + lm3533_devices[count].of_reg = reg;
> + lm3533_devices[count].use_of_reg = true;
> +
> + lm3533->have_backlights = true;
> + count++;
> + } else if (fwnode_device_is_compatible(child, "ti,lm3533-leds")) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret || reg < LM3533_HVLED_ID_MAX ||
> + reg > LM3533_LVLED_ID_MAX) {
> + dev_err(dev, "invalid LED node %pfw\n", child);
> + continue;
> + }
> +
> + lm3533_devices[count].name = "lm3533-leds";
> + lm3533_devices[count].of_compatible = "ti,lm3533-leds";
> + lm3533_devices[count].id = reg - LM3533_HVLED_ID_MAX;
> + lm3533_devices[count].of_reg = reg;
> + lm3533_devices[count].use_of_reg = true;
> +
> + lm3533->have_leds = true;
> + count++;
> + }
> + }
>
> lm3533_enable(lm3533);
>
> ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
> LM3533_BOOST_FREQ_MASK,
> - FIELD_PREP(LM3533_BOOST_FREQ_MASK, pdata->boost_freq));
> + FIELD_PREP(LM3533_BOOST_FREQ_MASK, lm3533->boost_freq));
> if (ret) {
> - dev_err(lm3533->dev, "failed to set boost frequency\n");
> + dev_err(dev, "failed to set boost frequency\n");
> goto err_disable;
> }
>
> ret = regmap_update_bits(lm3533->regmap, LM3533_REG_BOOST_PWM,
> LM3533_BOOST_OVP_MASK,
> - FIELD_PREP(LM3533_BOOST_OVP_MASK, pdata->boost_ovp));
> + FIELD_PREP(LM3533_BOOST_OVP_MASK, lm3533->boost_ovp));
> if (ret) {
> - dev_err(lm3533->dev, "failed to set boost ovp\n");
> + dev_err(dev, "failed to set boost ovp\n");
> goto err_disable;
> }
>
> - lm3533_device_als_init(lm3533);
> - lm3533_device_bl_init(lm3533);
> - lm3533_device_led_init(lm3533);
> + ret = mfd_add_devices(dev, 0, lm3533_devices, count, NULL, 0, NULL);
> + if (ret) {
> + dev_err(dev, "failed to add MFD devices: %d\n", ret);
> + goto err_disable;
> + }
>
> return 0;
>
> @@ -502,7 +439,26 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
> return PTR_ERR(lm3533->regmap);
>
> lm3533->dev = &i2c->dev;
> - lm3533->irq = i2c->irq;
> +
> + lm3533->hwen = devm_gpiod_get_optional(lm3533->dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(lm3533->hwen))
> + return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
> + "failed to get HWEN GPIO\n");
> +
> + device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt",
> + &lm3533->boost_ovp);
> +
> + lm3533->boost_ovp = clamp(lm3533->boost_ovp, LM3533_BOOST_OVP_MIN,
> + LM3533_BOOST_OVP_MAX);
> + lm3533->boost_ovp = lm3533->boost_ovp / (8 * MICRO) - 2;
> +
> + device_property_read_u32(lm3533->dev, "ti,boost-freq-hz",
> + &lm3533->boost_freq);
> +
> + lm3533->boost_freq = clamp(lm3533->boost_freq, LM3533_BOOST_FREQ_MIN,
> + LM3533_BOOST_FREQ_MAX);
> + lm3533->boost_freq = lm3533->boost_freq / (500 * KILO) - 1;
>
> return lm3533_device_init(lm3533);
> }
> @@ -516,6 +472,12 @@ static void lm3533_i2c_remove(struct i2c_client *i2c)
> lm3533_device_exit(lm3533);
> }
>
> +static const struct of_device_id lm3533_match_table[] = {
> + { .compatible = "ti,lm3533" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_match_table);
> +
> static const struct i2c_device_id lm3533_i2c_ids[] = {
> { "lm3533" },
> { }
> @@ -526,6 +488,7 @@ static struct i2c_driver lm3533_i2c_driver = {
> .driver = {
> .name = "lm3533",
> .dev_groups = lm3533_attribute_groups,
> + .of_match_table = lm3533_match_table,
> },
> .id_table = lm3533_i2c_ids,
> .probe = lm3533_i2c_probe,
> diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c
> index 91e13cfa3cf04..3aab8ece4e8cb 100644
> --- a/drivers/mfd/lm3533-ctrlbank.c
> +++ b/drivers/mfd/lm3533-ctrlbank.c
> @@ -13,11 +13,6 @@
>
> #include <linux/mfd/lm3533.h>
>
> -
> -#define LM3533_MAX_CURRENT_MIN 5000
> -#define LM3533_MAX_CURRENT_MAX 29800
> -#define LM3533_MAX_CURRENT_STEP 800
> -
> #define LM3533_PWM_MAX 0x3f
>
> #define LM3533_REG_PWM_BASE 0x14
> diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c
> index 9ef171d3aaeab..5ce237cb42190 100644
> --- a/drivers/video/backlight/lm3533_bl.c
> +++ b/drivers/video/backlight/lm3533_bl.c
> @@ -10,6 +10,7 @@
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/backlight.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> @@ -29,6 +30,9 @@ struct lm3533_bl {
> struct backlight_device *bd;
> int id;
>
> + u32 max_current;
> + u32 pwm;
> +
> bool have_als;
> };
>
> @@ -242,25 +246,25 @@ static const struct attribute_group *lm3533_bl_attribute_groups[] = {
> NULL,
> };
>
> -static int lm3533_bl_setup(struct lm3533_bl *bl,
> - struct lm3533_bl_platform_data *pdata)
> +static int lm3533_bl_setup(struct lm3533_bl *bl)
> {
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
> + ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&bl->cb, bl->pwm);
> }
>
> static int lm3533_bl_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_bl_platform_data *pdata;
> struct lm3533_bl *bl;
> struct backlight_device *bd;
> struct backlight_properties props;
> + char *name = NULL;
> + u32 default_brightness = LM3533_BL_MAX_BRIGHTNESS;
> int ret;
>
> dev_dbg(&pdev->dev, "%s\n", __func__);
> @@ -269,12 +273,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
> return -EINVAL;
> @@ -292,13 +290,21 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
> bl->cb.dev = NULL; /* until registered */
>
> + name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
> + pdev->name, pdev->id);
> + if (!name)
> + return -ENOMEM;
> +
> + device_property_read_u32(&pdev->dev, "default-brightness",
> + &default_brightness);
> +
> memset(&props, 0, sizeof(props));
> props.type = BACKLIGHT_RAW;
> props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
> - props.brightness = pdata->default_brightness;
> - bd = devm_backlight_device_register(&pdev->dev, pdata->name,
> - pdev->dev.parent, bl, &lm3533_bl_ops,
> - &props);
> + props.brightness = default_brightness;
> +
> + bd = devm_backlight_device_register(&pdev->dev, name, &pdev->dev,
> + bl, &lm3533_bl_ops, &props);
> if (IS_ERR(bd)) {
> dev_err(&pdev->dev, "failed to register backlight device\n");
> return PTR_ERR(bd);
> @@ -309,12 +315,19 @@ static int lm3533_bl_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, bl);
>
> - backlight_update_status(bd);
> + device_property_read_u32(&pdev->dev, "led-max-microamp",
> + &bl->max_current);
> + bl->max_current = clamp(bl->max_current, LM3533_MAX_CURRENT_MIN,
> + LM3533_MAX_CURRENT_MAX);
>
> - ret = lm3533_bl_setup(bl, pdata);
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &bl->pwm);
> +
> + ret = lm3533_bl_setup(bl);
> if (ret)
> return ret;
>
> + backlight_update_status(bd);
> +
> ret = lm3533_ctrlbank_enable(&bl->cb);
> if (ret)
> return ret;
> @@ -366,11 +379,18 @@ static void lm3533_bl_shutdown(struct platform_device *pdev)
> lm3533_ctrlbank_disable(&bl->cb);
> }
>
> +static const struct of_device_id lm3533_bl_match_table[] = {
> + { .compatible = "ti,lm3533-backlight" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_bl_match_table);
> +
> static struct platform_driver lm3533_bl_driver = {
> .driver = {
> .name = "lm3533-backlight",
> .pm = &lm3533_bl_pm_ops,
> .dev_groups = lm3533_bl_attribute_groups,
> + .of_match_table = lm3533_bl_match_table,
> },
> .probe = lm3533_bl_probe,
> .remove = lm3533_bl_remove,
> diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
> index 74cfb52c3bd17..5710e88da45d2 100644
> --- a/include/linux/mfd/lm3533.h
> +++ b/include/linux/mfd/lm3533.h
> @@ -15,6 +15,10 @@
> #define LM3533_ATTR_RW(_name) \
> DEVICE_ATTR(_name, S_IRUGO | S_IWUSR , show_##_name, store_##_name)
>
> +#define LM3533_MAX_CURRENT_MIN 5000
> +#define LM3533_MAX_CURRENT_MAX 29800
> +#define LM3533_MAX_CURRENT_STEP 800
> +
> struct device;
> struct gpio_desc;
> struct regmap;
> @@ -25,7 +29,9 @@ struct lm3533 {
> struct regmap *regmap;
>
> struct gpio_desc *hwen;
> - int irq;
> +
> + u32 boost_ovp;
> + u32 boost_freq;
>
> unsigned have_als:1;
> unsigned have_backlights:1;
> @@ -38,50 +44,6 @@ struct lm3533_ctrlbank {
> int id;
> };
>
> -struct lm3533_als_platform_data {
> - unsigned pwm_mode:1; /* PWM input mode (default analog) */
> - u8 r_select; /* 1 - 127 (ignored in PWM-mode) */
> -};
> -
> -struct lm3533_bl_platform_data {
> - char *name;
> - u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> - u8 default_brightness; /* 0 - 255 */
> - u8 pwm; /* 0 - 0x3f */
> -};
> -
> -struct lm3533_led_platform_data {
> - char *name;
> - const char *default_trigger;
> - u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> - u8 pwm; /* 0 - 0x3f */
> -};
> -
> -enum lm3533_boost_freq {
> - LM3533_BOOST_FREQ_500KHZ,
> - LM3533_BOOST_FREQ_1000KHZ,
> -};
> -
> -enum lm3533_boost_ovp {
> - LM3533_BOOST_OVP_16V,
> - LM3533_BOOST_OVP_24V,
> - LM3533_BOOST_OVP_32V,
> - LM3533_BOOST_OVP_40V,
> -};
> -
> -struct lm3533_platform_data {
> - enum lm3533_boost_ovp boost_ovp;
> - enum lm3533_boost_freq boost_freq;
> -
> - struct lm3533_als_platform_data *als;
> -
> - struct lm3533_bl_platform_data *backlights;
> - int num_backlights;
> -
> - struct lm3533_led_platform_data *leds;
> - int num_leds;
> -};
> -
> int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
> int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
>
> --
> 2.53.0
>
>
--
Lee Jones
next prev parent reply other threads:[~2026-08-11 19:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-31 11:36 [PATCH v6 00/14] mfd: lm3533: convert to OF bindings, improve support Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 01/14] dt-bindings: leds: Document TI LM3533 LED controller Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 02/14] mfd: lm3533: Remove driver specific regmap wrappers Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 03/14] mfd: lm3533: Remove extern from shared functions in the header Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 04/14] mfd: lm3533: Pass only regmap and light sensor presence to child devices Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 05/14] iio: light: lm3533-als: Remove redundant pdata helpers Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 06/14] mfd: lm3533-core: " Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 07/14] mfd: lm3533: Use dev_groups in struct device_driver Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 08/14] mfd: lm3533: Convert to use OF bindings Svyatoslav Ryhel
2026-08-11 19:11 ` Lee Jones [this message]
2026-08-11 19:12 ` Lee Jones
2026-07-31 11:36 ` [PATCH v6 09/14] mfd: lm3533: Add support for VIN power supply Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 10/14] mfd: lm3533: Set DMA mask Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 11/14] video: backlight: lm3533_bl: Improve logic of sysfs functions Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 12/14] video: backlight: lm3533_bl: Set initial mapping mode from DT Svyatoslav Ryhel
2026-07-31 11:36 ` [PATCH v6 13/14] video: backlight: lm3533_bl: Implement backlight_scale property Svyatoslav Ryhel
2026-07-31 15:18 ` [PATCH v6 00/14] mfd: lm3533: convert to OF bindings, improve support Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260811191132.GA1072730@google.com \
--to=lee@kernel.org \
--cc=andy@kernel.org \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=danielt@kernel.org \
--cc=deller@gmx.de \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jic23@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=johan@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mfd@lists.linux.dev \
--cc=nuno.sa@analog.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox