Devicetree
 help / color / mirror / Atom feed
From: Javier Carrasco <javier.carrasco.cruz@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	 Javier Carrasco <javier.carrasco.cruz@gmail.com>,
	 Jonathan Cameron <jic23@kernel.org>
Subject: [PATCH v6 3/4] iio: light: veml6031x00: add support for triggered buffers
Date: Wed, 12 Aug 2026 22:27:42 +0200	[thread overview]
Message-ID: <20260812-veml6031x00-v6-3-7eef6e4ce290@gmail.com> (raw)
In-Reply-To: <20260812-veml6031x00-v6-0-7eef6e4ce290@gmail.com>

Add triggered buffer functionality for the two channels the device
provides (ALS and IR).

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 drivers/iio/light/Kconfig       |   2 +
 drivers/iio/light/veml6031x00.c | 117 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 118 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 985b776e71d6..397b3e0d4408 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -742,6 +742,8 @@ config VEML6031X00
 	tristate "VEML6031X00 ambient light sensor series"
 	select REGMAP_I2C
 	select IIO_GTS_HELPER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	depends on I2C
 	help
 	  Say Y here if you want to build a driver for the Vishay VEML6031X00
diff --git a/drivers/iio/light/veml6031x00.c b/drivers/iio/light/veml6031x00.c
index 021bf726c60b..43a701f62aea 100644
--- a/drivers/iio/light/veml6031x00.c
+++ b/drivers/iio/light/veml6031x00.c
@@ -13,6 +13,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
 #include <linux/limits.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -25,6 +26,8 @@
 
 #include <linux/iio/iio.h>
 #include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
 
 /* Device registers */
 #define VEML6031X00_REG_CONF0       0x00
@@ -42,6 +45,12 @@
 
 #define VEML6031X00_GAIN_SEL(pd_div4, gain) (((pd_div4) << 2) | (gain))
 
+enum veml6031x00_scan {
+	VEML6031X00_SCAN_ALS,
+	VEML6031X00_SCAN_IR,
+	VEML6031X00_SCAN_TIMESTAMP,
+};
+
 struct veml6031x00_rf {
 	struct regmap_field *gain;
 	struct regmap_field *it;
@@ -137,6 +146,13 @@ static const struct iio_chan_spec veml6031x00_channels[] = {
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME) |
 						BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = VEML6031X00_SCAN_ALS,
+		.scan_type = {
+			.format = IIO_SCAN_FORMAT_UNSIGNED_INT,
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
 	},
 	{
 		.type = IIO_INTENSITY,
@@ -144,7 +160,15 @@ static const struct iio_chan_spec veml6031x00_channels[] = {
 		.modified = 1,
 		.channel2 = IIO_MOD_LIGHT_IR,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-	}
+		.scan_index = VEML6031X00_SCAN_IR,
+		.scan_type = {
+			.format = IIO_SCAN_FORMAT_UNSIGNED_INT,
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(VEML6031X00_SCAN_TIMESTAMP),
 };
 
 static const struct regmap_range veml6031x00_readable_ranges[] = {
@@ -388,6 +412,10 @@ static int veml6031x00_single_read(struct iio_dev *iio, enum iio_chan_type type,
 		return -EINVAL;
 	}
 
+	IIO_DEV_ACQUIRE_DIRECT_MODE(iio, claim);
+	if (IIO_DEV_ACQUIRE_FAILED(claim))
+		return -EBUSY;
+
 	guard(mutex)(&data->scale_lock);
 
 	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(regmap_get_device(data->regmap), pm);
@@ -451,6 +479,10 @@ static int veml6031x00_write_raw(struct iio_dev *iio,
 				 struct iio_chan_spec const *chan,
 				 int val, int val2, long mask)
 {
+	IIO_DEV_ACQUIRE_DIRECT_MODE(iio, claim);
+	if (IIO_DEV_ACQUIRE_FAILED(claim))
+		return -EBUSY;
+
 	switch (mask) {
 	case IIO_CHAN_INFO_INT_TIME:
 		return veml6031x00_set_it(iio, val, val2);
@@ -482,6 +514,82 @@ static const struct iio_info veml6031x00_info = {
 	.write_raw_get_fmt = veml6031x00_write_raw_get_fmt,
 };
 
+static int veml6031x00_buffer_preenable(struct iio_dev *iio)
+{
+	struct veml6031x00_data *data = iio_priv(iio);
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret, it_usec;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	ret = veml6031x00_get_it(data, &it_usec);
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(dev);
+		return ret;
+	}
+
+	/*
+	 * Wait one integration period + 10% margin so the first triggered
+	 * read does not race with the sensor completing its first conversion
+	 * after power-on.
+	 */
+	fsleep(it_usec + (it_usec / 10));
+
+	return 0;
+}
+
+static int veml6031x00_buffer_postdisable(struct iio_dev *iio)
+{
+	struct veml6031x00_data *data = iio_priv(iio);
+
+	pm_runtime_put_autosuspend(regmap_get_device(data->regmap));
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops veml6031x00_buffer_setup_ops = {
+	.preenable = veml6031x00_buffer_preenable,
+	.postdisable = veml6031x00_buffer_postdisable,
+};
+
+static irqreturn_t veml6031x00_trig_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio = pf->indio_dev;
+	struct veml6031x00_data *data = iio_priv(iio);
+	IIO_DECLARE_BUFFER_WITH_TS(__le16, scan, 2) = { };
+	unsigned int i = 0;
+	int ch, ret;
+
+	if (test_bit(VEML6031X00_SCAN_ALS, iio->active_scan_mask) &&
+	    test_bit(VEML6031X00_SCAN_IR, iio->active_scan_mask)) {
+		ret = regmap_bulk_read(data->regmap,
+				       VEML6031X00_REG_ALS_L,
+				       scan,
+				       2 * sizeof(*scan));
+		if (ret)
+			goto done;
+	} else {
+		iio_for_each_active_channel(iio, ch) {
+			ret = regmap_bulk_read(data->regmap,
+					       iio->channels[ch].address,
+					       &scan[i++],
+					       sizeof(*scan));
+			if (ret)
+				goto done;
+		}
+	}
+
+	iio_push_to_buffers_with_ts(iio, scan, sizeof(scan), pf->timestamp);
+
+done:
+	iio_trigger_notify_done(iio->trig);
+
+	return IRQ_HANDLED;
+}
+
 static int veml6031x00_validate_part_id(struct veml6031x00_data *data)
 {
 	struct device *dev = regmap_get_device(data->regmap);
@@ -587,6 +695,13 @@ static int veml6031x00_probe(struct i2c_client *i2c)
 
 	pm_runtime_put_autosuspend(dev);
 
+	ret = devm_iio_triggered_buffer_setup(dev, iio,
+					      iio_pollfunc_store_time,
+					      veml6031x00_trig_handler,
+					      &veml6031x00_buffer_setup_ops);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register triggered buffer\n");
+
 	ret = devm_iio_device_register(dev, iio);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to register iio device\n");

-- 
2.43.0


  parent reply	other threads:[~2026-08-12 20:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12 20:27 [PATCH v6 0/4] iio: light: add support for veml6031x00 ALS series Javier Carrasco
2026-08-12 20:27 ` [PATCH v6 1/4] dt-bindings: iio: light: veml6030: add " Javier Carrasco
2026-08-12 20:27 ` [PATCH v6 2/4] iio: light: add support for " Javier Carrasco
2026-08-13  1:04   ` Jonathan Cameron
2026-08-13  1:27     ` Jonathan Cameron
2026-08-12 20:27 ` Javier Carrasco [this message]
2026-08-13  1:09   ` [PATCH v6 3/4] iio: light: veml6031x00: add support for triggered buffers Jonathan Cameron
2026-08-12 20:27 ` [PATCH v6 4/4] iio: light: veml6031x00: add support for events and trigger Javier Carrasco
2026-08-12 20:47   ` sashiko-bot
2026-08-13  1:24   ` Jonathan Cameron
2026-08-13  0:48 ` [PATCH v6 0/4] iio: light: add support for veml6031x00 ALS series Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812-veml6031x00-v6-3-7eef6e4ce290@gmail.com \
    --to=javier.carrasco.cruz@gmail.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox