From: Rob Herring <robh@kernel.org>
To: Sai Krishna Musham <sai.krishna.musham@amd.com>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
mani@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
cassel@kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
michal.simek@amd.com, bharat.kumar.gogada@amd.com,
thippeswamy.havalige@amd.com, pranav.sanwal@amd.com
Subject: Re: [PATCH v4 1/2] dt-bindings: PCI: amd-mdb: Add CPM6 support
Date: Wed, 12 Aug 2026 17:54:09 -0500 [thread overview]
Message-ID: <20260812225409.GA1363147-robh@kernel.org> (raw)
In-Reply-To: <20260808105256.3705889-2-sai.krishna.musham@amd.com>
On Sat, Aug 08, 2026 at 04:22:55PM +0530, Sai Krishna Musham wrote:
> The AMD CPM6 PCIe controller is based on the Synopsys DesignWare PCIe IP.
> Add "intr" to snps,dw-pcie.yaml vendor-specific reg-names for the
> per-controller interrupt register region used by CPM6.
>
> Update amd,versal2-mdb-host.yaml with separate register definitions:
> - MDB5: 4 regions (slcr, config, dbi, atu)
> - CPM6: 5 regions (slcr, config, dbi, atu, intr)
>
> Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
> ---
> Changes in v4:
> - None
>
> Changes in v3:
> - Update subject to match history.
> - Move allOf to the end, after required block.
> - Drop the CPM6 example.
>
> Changes in v2:
> - Update the CPM6 device tree binding and example.
>
> v1 https://lore.kernel.org/all/20260402180006.486229-2-sai.krishna.musham@amd.com/
> v2 https://lore.kernel.org/all/20260728202044.1785986-2-sai.krishna.musham@amd.com/
> v3 https://lore.kernel.org/all/20260803144412.713639-2-sai.krishna.musham@amd.com/
> ---
> .../bindings/pci/amd,versal2-mdb-host.yaml | 45 ++++++++++++++++---
> .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +
> 2 files changed, 42 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
> index 406c15e1dee1..672589066854 100644
> --- a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
> +++ b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
> @@ -9,27 +9,30 @@ title: AMD Versal2 MDB(Multimedia DMA Bridge) Host Controller
> maintainers:
> - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
>
> -allOf:
> - - $ref: /schemas/pci/pci-host-bridge.yaml#
> - - $ref: /schemas/pci/snps,dw-pcie.yaml#
> -
> properties:
> compatible:
> - const: amd,versal2-mdb-host
> + enum:
> + - amd,versal2-mdb-host
> + - amd,versal2-cpm6-host
> + - amd,versal2-cpm6-host1
What is host and host1 difference? Please explain somewhere.
>
> reg:
> + minItems: 4
> items:
> - description: MDB System Level Control and Status Register (SLCR) Base
> - description: configuration region
> - description: data bus interface
> - description: address translation unit register
> + - description: CPM6 PCIe error and event interrupt registers
>
> reg-names:
> + minItems: 4
> items:
> - const: slcr
> - const: config
> - const: dbi
> - const: atu
> + - const: intr
>
> ranges:
> maxItems: 2
> @@ -92,6 +95,38 @@ required:
> - "#interrupt-cells"
> - interrupt-controller
>
> +allOf:
> + - $ref: /schemas/pci/pci-host-bridge.yaml#
> + - $ref: /schemas/pci/snps,dw-pcie.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amd,versal2-mdb-host
> + then:
> + properties:
> + reg:
> + minItems: 4
Drop. 4 is already the min.
> + maxItems: 4
> + reg-names:
> + minItems: 4
> + maxItems: 4
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - amd,versal2-cpm6-host
> + - amd,versal2-cpm6-host1
> + then:
> + properties:
> + reg:
> + minItems: 5
> + maxItems: 5
Drop. 5 is already the max.
> + reg-names:
> + minItems: 5
> + maxItems: 5
> +
> unevaluatedProperties: false
>
> examples:
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> index b3216141881c..21f86609ddb6 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -117,6 +117,8 @@ properties:
> enum: [ ecam ]
> - description: AMD MDB PCIe SLCR region
> const: slcr
> + - description: AMD CPM6 PCIe error and event interrupt registers
> + const: intr
> allOf:
> - contains:
> enum: [ dbi, ctrl ]
> --
> 2.44.4
>
next prev parent reply other threads:[~2026-08-12 22:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-08 10:52 [PATCH v4 0/2] pci: AMD: Add Versal2 CPM6 PCIe host controller support Sai Krishna Musham
2026-08-08 10:52 ` [PATCH v4 1/2] dt-bindings: PCI: amd-mdb: Add CPM6 support Sai Krishna Musham
2026-08-08 10:57 ` sashiko-bot
2026-08-12 22:54 ` Rob Herring [this message]
2026-08-08 10:52 ` [PATCH v4 2/2] PCI: amd-mdb: Add CPM6 host controller support Sai Krishna Musham
2026-08-08 11:06 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260812225409.GA1363147-robh@kernel.org \
--to=robh@kernel.org \
--cc=bharat.kumar.gogada@amd.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=michal.simek@amd.com \
--cc=pranav.sanwal@amd.com \
--cc=sai.krishna.musham@amd.com \
--cc=thippeswamy.havalige@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox