From: Jacky Huang <jackyhuang@nvidia.com>
To: Andrew Jeffery <andrew@codeconstruct.com.au>,
Joel Stanley <joel@jms.id.au>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Billy Tsai <billy_tsai@aspeedtech.com>,
<devicetree@vger.kernel.org>, <linux-aspeed@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <openbmc@lists.ozlabs.org>,
Jacky Huang <jackyhuang@nvidia.com>
Subject: [PATCH 0/8] ARM: dts: aspeed: Move flash nodes out of aspeed-g6.dtsi
Date: Thu, 13 Aug 2026 19:22:25 +0900 [thread overview]
Message-ID: <20260813102233.3088939-1-jackyhuang@nvidia.com> (raw)
Move SPI NOR flash descriptions out of aspeed-g6.dtsi. The disabled
flash@* stubs there describe board population, not SoC IP.
Patches #1..#7 make each board (or vendor common dtsi) declare the
flashes it uses, and keep status = "okay" so intermediate commits stay
bisect-safe while the stubs still exist. Patch #8 removes the stubs.
Jacky Huang (8):
ARM: dts: aspeed: facebook: Declare SPI NOR flashes on boards
ARM: dts: aspeed: ibm: Declare SPI NOR flashes on boards
ARM: dts: aspeed: nvidia: Declare SPI NOR flashes on boards
ARM: dts: aspeed: ampere: Declare SPI NOR flashes on boards
ARM: dts: aspeed: asus: Declare SPI NOR flashes on boards
ARM: dts: aspeed: inventec: Declare SPI NOR flashes on boards
ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards
ARM: dts: aspeed: g6: Remove board-level flash stubs
.../boot/dts/aspeed/aspeed-ast2600-evb.dts | 4 ++
.../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 9 +++
.../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 9 +++
.../aspeed-bmc-asus-kommando-ipmi-card.dts | 3 +
.../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts | 6 ++
.../aspeed/aspeed-bmc-facebook-anacapa.dts | 7 +++
.../aspeed/aspeed-bmc-facebook-bletchley.dts | 9 +++
.../aspeed/aspeed-bmc-facebook-catalina.dts | 6 ++
.../aspeed/aspeed-bmc-facebook-clemente.dts | 6 ++
.../aspeed/aspeed-bmc-facebook-greatlakes.dts | 4 ++
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 +++
.../aspeed/aspeed-bmc-facebook-minerva.dts | 6 ++
.../aspeed/aspeed-bmc-facebook-rainiera6.dts | 8 +++
.../aspeed/aspeed-bmc-facebook-sanmiguel.dts | 6 ++
.../aspeed-bmc-facebook-santabarbara.dts | 8 +++
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 4 ++
.../aspeed/aspeed-bmc-facebook-yosemite5.dts | 8 +++
.../boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts | 6 ++
.../aspeed/aspeed-bmc-inventec-starscream.dts | 6 ++
.../aspeed-bmc-inventec-transformers.dts | 6 ++
.../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 5 ++
.../dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts | 5 ++
.../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 9 +++
.../dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts | 9 +++
.../boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts | 6 ++
.../aspeed/aspeed-bmc-ufispace-ncplite.dts | 6 ++
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 56 -------------------
.../ast2600-facebook-netbmc-common.dtsi | 8 +++
28 files changed, 177 insertions(+), 56 deletions(-)
--
2.43.0
next reply other threads:[~2026-08-13 10:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 10:22 Jacky Huang [this message]
2026-08-13 10:22 ` [PATCH 1/8] ARM: dts: aspeed: facebook: Declare SPI NOR flashes on boards Jacky Huang
2026-08-13 10:22 ` [PATCH 2/8] ARM: dts: aspeed: ibm: " Jacky Huang
2026-08-13 10:22 ` [PATCH 3/8] ARM: dts: aspeed: nvidia: " Jacky Huang
2026-08-13 10:22 ` [PATCH 4/8] ARM: dts: aspeed: ampere: " Jacky Huang
2026-08-13 10:22 ` [PATCH 5/8] ARM: dts: aspeed: asus: " Jacky Huang
2026-08-13 10:22 ` [PATCH 6/8] ARM: dts: aspeed: inventec: " Jacky Huang
2026-08-13 10:22 ` [PATCH 7/8] ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards Jacky Huang
2026-08-13 10:22 ` [PATCH 8/8] ARM: dts: aspeed: g6: Remove board-level flash stubs Jacky Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813102233.3088939-1-jackyhuang@nvidia.com \
--to=jackyhuang@nvidia.com \
--cc=andrew@codeconstruct.com.au \
--cc=billy_tsai@aspeedtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox