From: Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>,
Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Aaron Kling <webgeek1234@gmail.com>
Subject: [PATCH 3/4] drm/panel: visionox-vtdr6130: Modularize panel config
Date: Fri, 14 Aug 2026 13:17:17 -0500 [thread overview]
Message-ID: <20260814-rp6-panel-v1-3-111c1aeccf0f@gmail.com> (raw)
In-Reply-To: <20260814-rp6-panel-v1-0-111c1aeccf0f@gmail.com>
From: Aaron Kling <webgeek1234@gmail.com>
The vtdr6130 is a DDIC, a common chip that is used by multiple panels.
Prepare the driver for more panels.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
drivers/gpu/drm/panel/panel-visionox-vtdr6130.c | 95 +++++++++++++++++--------
1 file changed, 65 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
index b66d6c7128c75..805c9846c2a0b 100644
--- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
+++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
@@ -19,11 +19,28 @@
struct visionox_vtdr6130 {
struct drm_panel panel;
- struct drm_dsc_config dsc;
+ struct drm_connector *connector;
struct mipi_dsi_device *dsi;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data *supplies;
enum drm_panel_orientation orientation;
+ struct visionox_vtdr6130_desc *desc;
+};
+
+struct visionox_vtdr6130_desc {
+ unsigned int width_mm;
+ unsigned int height_mm;
+
+ unsigned int bpc;
+ unsigned int lanes;
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+ int (*init_sequence)(struct visionox_vtdr6130 *ctx);
+
+ struct drm_dsc_config dsc;
};
static const struct regulator_bulk_data visionox_vtdr6130_supplies[] = {
@@ -162,7 +179,7 @@ static int visionox_vtdr6130_prepare(struct drm_panel *panel)
visionox_vtdr6130_reset(ctx);
- ret = visionox_vtdr6130_on(ctx);
+ ret = ctx->desc->init_sequence(ctx);
if (ret < 0) {
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(visionox_vtdr6130_supplies),
@@ -187,34 +204,58 @@ static int visionox_vtdr6130_unprepare(struct drm_panel *panel)
return 0;
}
-static const struct drm_display_mode visionox_vtdr6130_mode = {
- .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
- .hdisplay = 1080,
- .hsync_start = 1080 + 20,
- .hsync_end = 1080 + 20 + 2,
- .htotal = 1080 + 20 + 2 + 20,
- .vdisplay = 2400,
- .vsync_start = 2400 + 20,
- .vsync_end = 2400 + 20 + 2,
- .vtotal = 2400 + 20 + 2 + 18,
+static const struct drm_display_mode visionox_vtdr6130_modes[] = {
+ {
+ .clock = (1080 + 20 + 2 + 20) * (2400 + 20 + 2 + 18) * 144 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 2,
+ .htotal = 1080 + 20 + 2 + 20,
+ .vdisplay = 2400,
+ .vsync_start = 2400 + 20,
+ .vsync_end = 2400 + 20 + 2,
+ .vtotal = 2400 + 20 + 2 + 18,
+ },
+};
+
+static struct visionox_vtdr6130_desc visionox_vtdr6130_panel_desc = {
+ .modes = visionox_vtdr6130_modes,
+ .num_modes = ARRAY_SIZE(visionox_vtdr6130_modes),
.width_mm = 71,
.height_mm = 157,
+ .bpc = 8,
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS,
+ .init_sequence = visionox_vtdr6130_on,
+ .dsc = {
+ .dsc_version_major = 0x1,
+ .dsc_version_minor = 0x2,
+ .slice_height = 40,
+ .slice_width = 540,
+ .slice_count = 2,
+ .bits_per_component = 8,
+ .bits_per_pixel = 8 << 4,
+ .block_pred_enable = true,
+ },
};
static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
+ struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
struct drm_display_mode *mode;
- mode = drm_mode_duplicate(connector->dev, &visionox_vtdr6130_mode);
+ mode = drm_mode_duplicate(connector->dev, ctx->desc->modes);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
- connector->display_info.width_mm = mode->width_mm;
- connector->display_info.height_mm = mode->height_mm;
+ connector->display_info.width_mm = ctx->desc->width_mm;
+ connector->display_info.height_mm = ctx->desc->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
@@ -284,23 +325,17 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
"Failed to get reset-gpios\n");
+ ctx->desc = (struct visionox_vtdr6130_desc *)of_device_get_match_data(dev);
+ if (!ctx->desc)
+ return -ENODEV;
+
ctx->dsi = dsi;
mipi_dsi_set_drvdata(dsi, ctx);
- ctx->dsc.dsc_version_major = 0x1;
- ctx->dsc.dsc_version_minor = 0x2;
- ctx->dsc.slice_height = 40;
- ctx->dsc.slice_width = 540;
- ctx->dsc.slice_count = 2;
- ctx->dsc.bits_per_component = 8;
- ctx->dsc.bits_per_pixel = 8 << 4;
- ctx->dsc.block_pred_enable = true;
-
- dsi->dsc = &ctx->dsc;
- dsi->lanes = 4;
- dsi->format = MIPI_DSI_FMT_RGB888;
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
- MIPI_DSI_CLOCK_NON_CONTINUOUS;
+ dsi->dsc = &ctx->desc->dsc;
+ dsi->lanes = ctx->desc->lanes;
+ dsi->format = ctx->desc->format;
+ dsi->mode_flags = ctx->desc->mode_flags;
ctx->panel.prepare_prev_first = true;
ret = drm_of_get_panel_orientation(dev->of_node, &ctx->orientation);
@@ -322,7 +357,7 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
}
static const struct of_device_id visionox_vtdr6130_of_match[] = {
- { .compatible = "visionox,vtdr6130" },
+ { .compatible = "visionox,vtdr6130", .data = &visionox_vtdr6130_panel_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, visionox_vtdr6130_of_match);
--
2.54.0
next prev parent reply other threads:[~2026-08-14 18:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-14 18:17 [PATCH 0/4] drm/panel: Support Retroid Pocket 6 panel Aaron Kling via B4 Relay
2026-08-14 18:17 ` [PATCH 1/4] dt-bindings: display: visionox,vtdr6130: Add " Aaron Kling via B4 Relay
2026-08-14 18:25 ` sashiko-bot
2026-08-14 18:17 ` [PATCH 2/4] drm/panel: visionox-vtdr6130: Add panel orientation support Aaron Kling via B4 Relay
2026-08-14 18:17 ` Aaron Kling via B4 Relay [this message]
2026-08-14 18:23 ` [PATCH 3/4] drm/panel: visionox-vtdr6130: Modularize panel config sashiko-bot
2026-08-14 18:17 ` [PATCH 4/4] drm/panel: visionox-vtdr6130: Add Retroid Pocket 6 panel Aaron Kling via B4 Relay
2026-08-14 18:26 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260814-rp6-panel-v1-3-111c1aeccf0f@gmail.com \
--to=devnull+webgeek1234.gmail.com@kernel.org \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=webgeek1234@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox