Devicetree
 help / color / mirror / Atom feed
From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Frank.Li@nxp.com, s.hauer@pengutronix.de, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, imx@lists.linux.dev
Cc: kernel@pengutronix.de, festevam@gmail.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 00/17] arm64: dts: Add MQS1 sound card support for i.MX9 EVK platforms
Date: Fri, 14 Aug 2026 16:20:04 +0900	[thread overview]
Message-ID: <20260814072022.4064009-1-chancel.liu@oss.nxp.com> (raw)

From: Chancel Liu <chancel.liu@nxp.com>

MQS (Medium Quality Sound) is an internal audio DAC available on multiple
NXP i.MX9 SoCs. On EVK boards, the MQS output pins are typically shared
with other peripherals (CAN, PDM microphone, etc.), so enabling MQS
requires switching board-level pin muxes and disabling the conflicting
device.

This series adds MQS1 sound card support across the following platforms:
  - i.MX91 11x11 EVK
  - i.MX93 11x11 EVK
  - i.MX93 14x14 EVK
  - i.MX943 EVK
  - i.MX95 15x15 EVK
  - i.MX952 EVK

Chancel Liu (17):
  arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties
    for MQS
  arm64: dts: imx91-11x11-evk: Add board muxes to select between PDM and
    MQS1
  arm64: dts: imx91-11x11-evk: Add pinmux and mark conflicting devices
    for MQS1
  arm64: dts: imx93-11x11-evk: Add board muxes to select between PDM and
    MQS1
  arm64: dts: imx93-11x11-evk: Add pinmux and mark conflicting devices
    for MQS1
  arm64: dts: imx93-14x14-evk: Add board muxes to select between
    FlexCAN1 and MQS1
  arm64: dts: imx93-14x14-evk: Add pinmux and mark conflicting devices
    for MQS1
  arm64: dts: imx94: Add clock and sound-dai-cells properties for MQS1
  arm64: dts: imx943-evk: Add board muxes to select between CAN1/PDM and
    MQS1/MIC
  arm64: dts: imx943-evk: Add pinmux and mark conflicting devices for
    MQS1
  arm64: dts: imx95: Add clock and sound-dai-cells properties for MQS1
  arm64: dts: imx95-15x15-evk: Add board muxes to select between PDM and
    MQS1
  arm64: dts: imx95-15x15-evk: Add pinmux and mark conflicting devices
    for MQS1
  arm64: dts: imx952: Add AONMIX MQS device node
  arm64: dts: imx952-evk: Add board muxes to select between CAN1/PDM
  arm64: dts: imx952-evk: Add pinmux and mark conflicting devices for
    MQS1
  arm64: dts: fsl: Add DT overlay to build MQS1 sound cards on i.MX9
    platforms

 arch/arm64/boot/dts/freescale/Makefile        | 12 ++++
 arch/arm64/boot/dts/freescale/imx9-mqs.dtso   | 54 ++++++++++++++
 .../boot/dts/freescale/imx91-11x11-evk.dts    | 41 ++++++++++-
 .../boot/dts/freescale/imx91_93_common.dtsi   |  6 ++
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 41 ++++++++++-
 .../boot/dts/freescale/imx93-14x14-evk.dts    | 50 ++++++++++++-
 arch/arm64/boot/dts/freescale/imx94.dtsi      |  3 +
 arch/arm64/boot/dts/freescale/imx943-evk.dts  | 70 +++++++++++++-----
 .../boot/dts/freescale/imx95-15x15-evk.dts    | 42 ++++++++++-
 arch/arm64/boot/dts/freescale/imx95.dtsi      |  3 +
 arch/arm64/boot/dts/freescale/imx952-evk.dts  | 71 ++++++++++++++-----
 arch/arm64/boot/dts/freescale/imx952.dtsi     |  8 +++
 12 files changed, 358 insertions(+), 43 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx9-mqs.dtso

--
2.50.1


             reply	other threads:[~2026-08-14  7:20 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-14  7:20 Chancel Liu [this message]
2026-08-14  7:20 ` [PATCH 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS Chancel Liu
2026-08-14  7:30   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 02/17] arm64: dts: imx91-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 03/17] arm64: dts: imx91-11x11-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:31   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 04/17] arm64: dts: imx93-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 05/17] arm64: dts: imx93-11x11-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:33   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 06/17] arm64: dts: imx93-14x14-evk: Add board muxes to select between FlexCAN1 and MQS1 Chancel Liu
2026-08-14  7:31   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 07/17] arm64: dts: imx93-14x14-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:33   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 08/17] arm64: dts: imx94: Add clock and sound-dai-cells properties " Chancel Liu
2026-08-14  7:20 ` [PATCH 09/17] arm64: dts: imx943-evk: Add board muxes to select between CAN1/PDM and MQS1/MIC Chancel Liu
2026-08-14  7:20 ` [PATCH 10/17] arm64: dts: imx943-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 11/17] arm64: dts: imx95: Add clock and sound-dai-cells properties " Chancel Liu
2026-08-14  7:30   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 12/17] arm64: dts: imx95-15x15-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-14  7:20 ` [PATCH 13/17] arm64: dts: imx95-15x15-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:36   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 14/17] arm64: dts: imx952: Add AONMIX MQS device node Chancel Liu
2026-08-14  7:20 ` [PATCH 15/17] arm64: dts: imx952-evk: Add board muxes to select between CAN1/PDM Chancel Liu
2026-08-14  7:20 ` [PATCH 16/17] arm64: dts: imx952-evk: Add pinmux and mark conflicting devices for MQS1 Chancel Liu
2026-08-14  7:42   ` sashiko-bot
2026-08-14  7:20 ` [PATCH 17/17] arm64: dts: fsl: Add DT overlay to build MQS1 sound cards on i.MX9 platforms Chancel Liu
2026-08-14  7:40   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814072022.4064009-1-chancel.liu@oss.nxp.com \
    --to=chancel.liu@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox