[PATCH v3 1/2] ARM: dts: ti: keystone-k2l: Rename ti,davinci-spi-num-cs to num-cs

[Bhargav Joshi <j.bhargav.u@gmail.com>]

Property ti,davinci-spi-num-cs is present in the SPI
nodes of keystone-k2l.dtsi, but it has never been documented in the
bindings or matched by driver. Driver relies on standard num-cs
property instead. Use standard property num-cs instad of
davinci-spi-num-cs.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
 arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
index 330b437b667f..39a846d7f8a4 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
@@ -401,15 +401,15 @@ mdio: mdio@26200f00 {
 };
 
 &spi0 {
-       ti,davinci-spi-num-cs = <5>;
+	num-cs = <5>;
 };
 
 &spi1 {
-       ti,davinci-spi-num-cs = <3>;
+	num-cs = <3>;
 };
 
 &spi2 {
-       ti,davinci-spi-num-cs = <5>;
+	num-cs = <5>;
        /* Pin muxed. Enabled and configured by Bootloader */
        status = "disabled";
 };

-- 
2.55.0