From: Chancel Liu <chancel.liu@oss.nxp.com>
To: Frank.Li@nxp.com, s.hauer@pengutronix.de, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, imx@lists.linux.dev
Cc: kernel@pengutronix.de, festevam@gmail.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 14/17] arm64: dts: imx952: Add AONMIX MQS device node
Date: Tue, 18 Aug 2026 12:02:08 +0900 [thread overview]
Message-ID: <20260818030211.3141710-15-chancel.liu@oss.nxp.com> (raw)
In-Reply-To: <20260818030211.3141710-1-chancel.liu@oss.nxp.com>
From: Chancel Liu <chancel.liu@nxp.com>
Add DT node for AONMIX MQS (i.e. MQS1).
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
---
arch/arm64/boot/dts/freescale/imx952.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx952.dtsi b/arch/arm64/boot/dts/freescale/imx952.dtsi
index 020de00e8285..54dc793a2f69 100644
--- a/arch/arm64/boot/dts/freescale/imx952.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx952.dtsi
@@ -261,6 +261,14 @@ scmi_misc: protocol@84 {
};
};
+ mqs1: mqs1 {
+ compatible = "fsl,imx95-aonmix-mqs";
+ clocks = <&scmi_clk IMX952_CLK_SAI1>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@48000000 {
compatible = "arm,gic-v3";
reg = <0 0x48000000 0 0x10000>,
--
2.50.1
next prev parent reply other threads:[~2026-08-18 3:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-18 3:01 [PATCH v2 00/17] arm64: dts: Add MQS1 sound card support for i.MX9 EVK platforms Chancel Liu
2026-08-18 3:01 ` [PATCH v2 01/17] arm64: dts: imx91_93_common: Add clock and sound-dai-cells properties for MQS Chancel Liu
2026-08-18 3:01 ` [PATCH v2 02/17] arm64: dts: imx91-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18 3:01 ` [PATCH v2 03/17] arm64: dts: imx91-11x11-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:01 ` [PATCH v2 04/17] arm64: dts: imx93-11x11-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18 3:01 ` [PATCH v2 05/17] arm64: dts: imx93-11x11-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:02 ` [PATCH v2 06/17] arm64: dts: imx93-14x14-evk: Add board muxes to select between FlexCAN1 and MQS1 Chancel Liu
2026-08-18 3:13 ` sashiko-bot
2026-08-19 10:09 ` Chancel Liu
2026-08-18 3:02 ` [PATCH v2 07/17] arm64: dts: imx93-14x14-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:02 ` [PATCH v2 08/17] arm64: dts: imx94: Add clock and sound-dai-cells properties for MQS1 Chancel Liu
2026-08-18 3:02 ` [PATCH v2 09/17] arm64: dts: imx943-evk: Add board muxes to select between CAN1/PDM and MQS1/MIC Chancel Liu
2026-08-18 3:02 ` [PATCH v2 10/17] arm64: dts: imx943-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:02 ` [PATCH v2 11/17] arm64: dts: imx95: Add clock and sound-dai-cells properties for MQS1 Chancel Liu
2026-08-18 3:02 ` [PATCH v2 12/17] arm64: dts: imx95-15x15-evk: Add board muxes to select between PDM and MQS1 Chancel Liu
2026-08-18 3:02 ` [PATCH v2 13/17] arm64: dts: imx95-15x15-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:02 ` Chancel Liu [this message]
2026-08-18 3:02 ` [PATCH v2 15/17] arm64: dts: imx952-evk: Add board muxes to select between CAN1/PDM Chancel Liu
2026-08-18 3:02 ` [PATCH v2 16/17] arm64: dts: imx952-evk: Add MQS1 pinmux, clocks and mark conflicting devices Chancel Liu
2026-08-18 3:02 ` [PATCH v2 17/17] arm64: dts: fsl: Add DT overlay to build MQS1 sound cards on i.MX9 platforms Chancel Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260818030211.3141710-15-chancel.liu@oss.nxp.com \
--to=chancel.liu@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox