From: Conor Dooley <conor@kernel.org>
To: Udaya Kiran Challa <challauday369@gmail.com>
Cc: lee@kernel.org, pavel@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
skhan@linuxfoundation.org, me@brighamcampbell.com,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
Date: Thu, 20 Aug 2026 19:06:26 +0100 [thread overview]
Message-ID: <20260820-seventh-essay-235f3711ad74@spud> (raw)
In-Reply-To: <20260820150223.108374-1-challauday369@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 8755 bytes --]
On Thu, Aug 20, 2026 at 08:32:23PM +0530, Udaya Kiran Challa wrote:
> Convert lacie,netxbig-leds devicetree binding from legacy
> text format to DT schema.
>
> Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
> ---
> .../bindings/leds/lacie,netxbig-leds.yaml | 134 ++++++++++++++++++
> .../devicetree/bindings/leds/leds-netxbig.txt | 92 ------------
> 2 files changed, 134 insertions(+), 92 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> new file mode 100644
> index 000000000000..ffdd47458d24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/lacie,netxbig-leds.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/lacie,netxbig-leds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LaCie/Seagate netxbig CPLD LEDs
> +
> +maintainers:
> + - Simon Guinot <simon.guinot@sequanux.org>
> +
> +description: |
> + Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
> + boards (Example: 2Big/5Big Network v2, 2Big NAS).
> +
> +properties:
> + compatible:
> + const: lacie,netxbig-leds
> +
> + gpio-ext:
> + description: Phandle for the gpio-ext bus.
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + timers:
> + description: |
> + Timer array. Each timer entry is represented by three integers:
> + Mode (gpio-ext bus), delay_on and delay_off.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +required:
> + - compatible
> + - gpio-ext
This should be after the block defining the child nodes.
> +
> +additionalProperties:
This is not how the child nodes should be implmeneted, it should use
pattenProperties instead.
> + description: Each child node represents a single LED
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
This should IMO be additionalProperties: false, and the two option
properties that are supported explicitly cited.
The rest of this looks fine I think.
pw-bot: changes-requested
Thanks,
Conor.
> +
> + properties:
> + mode-addr:
> + description: Mode register address on gpio-ext bus.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + mode-val:
> + description: |
> + Mode to value mapping. Each entry is represented by two integers: a mode and
> + the corresponding value on the gpio-ext bus.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> + bright-addr:
> + description: Brightness register address on gpio-ext bus.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + max-brightness:
> + description: Maximum brightness value.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + required:
> + - mode-addr
> + - mode-val
> + - bright-addr
> + - max-brightness
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/leds-netxbig.h>
> +
> + netxbig-leds {
> + compatible = "lacie,netxbig-leds";
> +
> + gpio-ext = <&netxbig_gpio_ext>;
> +
> + timers = <NETXBIG_LED_TIMER1 500 500
> + NETXBIG_LED_TIMER2 500 1000>;
> +
> + blue-power {
> + label = "netxbig:blue:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 1
> + NETXBIG_LED_TIMER1 3
> + NETXBIG_LED_TIMER2 7>;
> + bright-addr = <1>;
> + max-brightness = <7>;
> + };
> + red-power {
> + label = "netxbig:red:power";
> + mode-addr = <0>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <1>;
> + max-brightness = <7>;
> + };
> + blue-sata0 {
> + label = "netxbig:blue:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + max-brightness = <7>;
> + };
> + red-sata0 {
> + label = "netxbig:red:sata0";
> + mode-addr = <3>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + max-brightness = <7>;
> + };
> + blue-sata1 {
> + label = "netxbig:blue:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 7
> + NETXBIG_LED_SATA 1
> + NETXBIG_LED_TIMER1 3>;
> + bright-addr = <2>;
> + max-brightness = <7>;
> + };
> + red-sata1 {
> + label = "netxbig:red:sata1";
> + mode-addr = <4>;
> + mode-val = <NETXBIG_LED_OFF 0
> + NETXBIG_LED_ON 2
> + NETXBIG_LED_TIMER1 4>;
> + bright-addr = <2>;
> + max-brightness = <7>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
> deleted file mode 100644
> index 5ef92a26d768..000000000000
> --- a/Documentation/devicetree/bindings/leds/leds-netxbig.txt
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
> -boards (Example: 2Big/5Big Network v2, 2Big NAS).
> -
> -Required properties:
> -- compatible: "lacie,netxbig-leds".
> -- gpio-ext: Phandle for the gpio-ext bus.
> -
> -Optional properties:
> -- timers: Timer array. Each timer entry is represented by three integers:
> - Mode (gpio-ext bus), delay_on and delay_off.
> -
> -Each LED is represented as a sub-node of the netxbig-leds device.
> -
> -Required sub-node properties:
> -- mode-addr: Mode register address on gpio-ext bus.
> -- mode-val: Mode to value mapping. Each entry is represented by two integers:
> - A mode and the corresponding value on the gpio-ext bus.
> -- bright-addr: Brightness register address on gpio-ext bus.
> -- max-brightness: Maximum brightness value.
> -
> -Optional sub-node properties:
> -- label: Name for this LED. If omitted, the label is taken from the node name.
> -- linux,default-trigger: Trigger assigned to the LED.
> -
> -Example:
> -
> -netxbig-leds {
> - compatible = "lacie,netxbig-leds";
> -
> - gpio-ext = &gpio_ext;
> -
> - timers = <NETXBIG_LED_TIMER1 500 500
> - NETXBIG_LED_TIMER2 500 1000>;
> -
> - blue-power {
> - label = "netxbig:blue:power";
> - mode-addr = <0>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 1
> - NETXBIG_LED_TIMER1 3
> - NETXBIG_LED_TIMER2 7>;
> - bright-addr = <1>;
> - max-brightness = <7>;
> - };
> - red-power {
> - label = "netxbig:red:power";
> - mode-addr = <0>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 2
> - NETXBIG_LED_TIMER1 4>;
> - bright-addr = <1>;
> - max-brightness = <7>;
> - };
> - blue-sata0 {
> - label = "netxbig:blue:sata0";
> - mode-addr = <3>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 7
> - NETXBIG_LED_SATA 1
> - NETXBIG_LED_TIMER1 3>;
> - bright-addr = <2>;
> - max-brightness = <7>;
> - };
> - red-sata0 {
> - label = "netxbig:red:sata0";
> - mode-addr = <3>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 2
> - NETXBIG_LED_TIMER1 4>;
> - bright-addr = <2>;
> - max-brightness = <7>;
> - };
> - blue-sata1 {
> - label = "netxbig:blue:sata1";
> - mode-addr = <4>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 7
> - NETXBIG_LED_SATA 1
> - NETXBIG_LED_TIMER1 3>;
> - bright-addr = <2>;
> - max-brightness = <7>;
> - };
> - red-sata1 {
> - label = "netxbig:red:sata1";
> - mode-addr = <4>;
> - mode-val = <NETXBIG_LED_OFF 0
> - NETXBIG_LED_ON 2
> - NETXBIG_LED_TIMER1 4>;
> - bright-addr = <2>;
> - max-brightness = <7>;
> - };
> -};
> --
> 2.34.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
prev parent reply other threads:[~2026-08-20 18:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 15:02 [PATCH] dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema Udaya Kiran Challa
2026-08-20 15:11 ` sashiko-bot
2026-08-20 18:06 ` Conor Dooley [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820-seventh-essay-235f3711ad74@spud \
--to=conor@kernel.org \
--cc=challauday369@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=me@brighamcampbell.com \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox