From: Petko Manolov <petko.manolov@konsulko.com>
To: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Petko Manolov <petko.manolov@konsulko.com>
Subject: [PATCH v1 1/1] ARM: dts: draeger: Add devicetree files for M48 Intel/Altera SoCFPGA Cyclone
Date: Tue, 25 Aug 2026 16:54:25 +0300 [thread overview]
Message-ID: <20260825135426.3967333-2-petko.manolov@konsulko.com> (raw)
In-Reply-To: <20260825135426.3967333-1-petko.manolov@konsulko.com>
Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
---
arch/arm/boot/dts/intel/socfpga/Makefile | 1 +
.../socfpga/socfpga_cyclone5_draeger_m48.dts | 132 ++++++++++++++++++
2 files changed, 133 insertions(+)
create mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
index 8df0976da01c..cdcea11abdfa 100644
--- a/arch/arm/boot/dts/intel/socfpga/Makefile
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
socfpga_arria10_mercury_aa1_st1_emmc.dtb \
socfpga_arria10_mercury_aa1_st1_qspi.dtb \
socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
+ socfpga_cyclone5_draeger_m48.dtb \
socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
new file mode 100644
index 000000000000..fd597f15c0d8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_draeger_m48.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Draeger and Licensors, info@draeger.com
+ */
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "Draeger M48 Cyclone V SoC";
+ compatible = "draeger,M48/socfpga", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+
+ /* 1GB */
+ };
+
+ aliases {
+ /* this allow the ethaddr uboot environmnet variable contents
+ * to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac0;
+ };
+
+ soc {
+ gpio3: gpio@0xff202000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff202000 0x20>;
+ status = "okay";
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <2>;
+ reg = <0>;
+ bank-name = "SYNC_I";
+ };
+ };
+
+ gpio4: gpio@0xff202020 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff202020 0x20>;
+ status = "okay";
+
+ porte: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <2>;
+ reg = <0>;
+ bank-name = "SYNC_O";
+ };
+ };
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ rxc-skew-ps = <1860>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <900>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom_mac: eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&mmc0 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ flash0: n25q00@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00";
+ reg = <0>;
+
+ /* chip select */
+ spi-max-frequency = <100000000>;
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ };
+};
--
2.47.3
next prev parent reply other threads:[~2026-08-25 13:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-25 13:54 [PATCH v1 0/1] ARM: dts: draeger: Add devicetrees for Draeger's M48 board Petko Manolov
2026-08-25 13:54 ` Petko Manolov [this message]
2026-08-25 14:06 ` [PATCH v1 1/1] ARM: dts: draeger: Add devicetree files for M48 Intel/Altera SoCFPGA Cyclone sashiko-bot
-- strict thread matches above, loose matches on Subject: below --
2026-08-25 14:02 [PATCH v1 0/1] ARM: dts: draeger: Add devicetrees for Draeger's M48 board Petko Manolov
2026-08-25 14:02 ` [PATCH v1 1/1] ARM: dts: draeger: Add devicetree files for M48 Intel/Altera SoCFPGA Cyclone Petko Manolov
2026-08-25 14:16 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260825135426.3967333-2-petko.manolov@konsulko.com \
--to=petko.manolov@konsulko.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox