[PATCH v1 1/1] media: dt-bindings: tc358743: Convert to YAML

[Frank.Li@oss.nxp.com]

From: Frank Li <Frank.Li@nxp.com>

Convert the Toshiba TC358743 HDMI-RX to MIPI CSI2-TX bridge device
tree binding from txt to YAML format.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../bindings/media/i2c/toshiba,tc358743.txt   | 48 ----------
 .../bindings/media/i2c/toshiba,tc358743.yaml  | 93 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 94 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
deleted file mode 100644
index 59102edcf01ea..0000000000000
--- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge
-
-The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
-a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
-
-Required Properties:
-
-- compatible: value should be "toshiba,tc358743"
-- clocks, clock-names: should contain a phandle link to the reference clock
-		       source, the clock input is named "refclk".
-
-Optional Properties:
-
-- reset-gpios: gpio phandle GPIO connected to the reset pin
-- interrupts: GPIO connected to the interrupt pin
-- data-lanes: should be <1 2 3 4> for four-lane operation,
-	      or <1 2> for two-lane operation
-- clock-lanes: should be <0>
-- clock-noncontinuous: Presence of this boolean property decides whether the
-		       MIPI CSI-2 clock is continuous or non-continuous.
-- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
-		    expressed as a 64-bit big-endian integer. The frequency
-		    is half of the bps per lane due to DDR transmission.
-
-For further information on the MIPI CSI-2 endpoint node properties, see
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	tc358743@f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		port {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.yaml
new file mode 100644
index 0000000000000..29dd1d58f766f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358743.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+
+description:
+  The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
+  a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
+
+properties:
+  compatible:
+    const: toshiba,tc358743
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@f {
+            compatible = "toshiba,tc358743";
+            reg = <0x0f>;
+            clocks = <&hdmi_osc>;
+            clock-names = "refclk";
+            reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+            port {
+                 endpoint {
+                     remote-endpoint = <&mipi_csi2_in>;
+                     data-lanes = <1 2 3 4>;
+                     clock-lanes = <0>;
+                     clock-noncontinuous;
+                     link-frequencies = /bits/ 64 <297000000>;
+                 };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index fe10d29b7657b..9abeaa3f31ca8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -27673,7 +27673,7 @@ TOSHIBA TC358743 DRIVER
 M:	Hans Verkuil <hverkuil@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
+F:	Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.yaml
 F:	drivers/media/i2c/tc358743*
 F:	include/media/i2c/tc358743.h
 
-- 
2.43.0