From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-vk1-f181.google.com (mail-vk1-f181.google.com [209.85.221.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 337A141C6A for ; Fri, 28 Aug 2026 06:38:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.181 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1787899130; cv=none; b=fgmjN5+vQxbklJLzhMmXD0NDzvILSD4NWrvrLw+LgZ5ljLoayWT6P05EAt7pTMqX3Kyz10LDPHahH2zn3nCUIiQwI7ZcDB/4i9oPGh9EAFSlmcuHYtZFGjbQa9Xeb50n9ymiH3ViS4RCDaDuPBh94aknTzgbusXNBvd6xITc/UE= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1787899130; c=relaxed/simple; bh=DDo13wwLlYbjGc+vmoTMKrXc8Q3Ay18o6BblG/u9PbA=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=dHKSSuz+25FOwSP0PGCy+AblvT9oHR6cvjlsq3T3jiqhbiOaIXxow4AF/wFK0C8WMgnbw301757716ZhjW3S0cw9M+Vnmd5RnKHi/oQOZfJeWquTMV9bk9H1QhFSayrsSIj56ENCs3kUMb2mNH/8za7wcwCGRF9dW2m6+z6Mxc8= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=ZbOHUpAT; arc=none smtp.client-ip=209.85.221.181 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="ZbOHUpAT" Received: by mail-vk1-f181.google.com with SMTP id 71dfb90a1353d-5c2ae02f69eso536118e0c.2 for ; Thu, 27 Aug 2026 23:38:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1787899123; x=1788503923; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :content-type:mime-version:subject:date:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=jbHEcSo0Yi8Hel90njrfpBZZr+GuK02w+zwFa8IkLTQ=; b=ZbOHUpATu0ftaVFshrVS57VUljA2YRwYwmDV0pRbt/Kq2vThwN1lZMjiQ1tUX/fAvL 2SUKmdvNAKq99hyfaYhPFtMqy2h/yAJqEOY38kWtXyc4jXMxNInpPhdvDm9KrkVuuy/n 7XwKhaiUHPplzuH56CNuZzfRooB/UxjE0pYAreHp5poom+WVHDa2r5Nf/p4SKfDugn23 H/TumWQtjxHsWjcsFaDpFQ84sZ07mgmpXxZc+M804oohlLq7ZTNjVeVCtlD4WCHgKt/X 49Lj7jdPZkAnmLGduHIepBcUzf+mcVMfY0AgoEpawwd6CLAGLOoWTZE/3y9orD3gz3vI QITg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1787899123; x=1788503923; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :content-type:mime-version:subject:date:from:x-gm-gg :x-gm-message-state:from:to:cc:subject:date:message-id:reply-to :content-type; bh=jbHEcSo0Yi8Hel90njrfpBZZr+GuK02w+zwFa8IkLTQ=; b=roOvUWvS1z2+skZXzWrGqgrXUgdszuQwfZ1OK+BeyuepWFO6PCOAO/TI7RsXbW2dpY T4pJZiTkC2jwYXeTJTLdp/97FdawVCWjiMS3Ec2jbdrVlRtsuf/z4K0LkCfWpceQOjbe tehZAMwY8hJ8Xkd14qvwA4+idT7ALsFrN/jSNP5QRURrbv73CiOJ87HEyfUwXPdOvhzc EYyo3sFQbEXZOz4zOL7DqLPNXIW5MmJIp+vvNSt6qx+MegKQeKr+b59Go2QtV0YY4EWE pdAtUoNNjcpks52wvgFQCVkmGhtI3zf0TuGg/XpVvUsL7gygK8FqCt/70dsCNyU0E6VV FV4g== X-Forwarded-Encrypted: i=1; AHgh+RrHySHA/s5cCAMicLFOvbf0tszejat1sRFbS/OLhCRown2YCVjhYWnZmxqP4xVMmKpY/oXN5ny2o5b/@vger.kernel.org X-Gm-Message-State: AFuF++noeZlS53ZrhMCIMag5oIV/gwmKDbEpeDqb5N46Tl9WMSx6E4ws zJ4o44xh7qW9z2IZWaouRXs7Xh2Nhyfw9JC+yXFg2vVmL7trd6rqT2asO3ZYCg== X-Gm-Gg: AR+sD13t0KAWZeiHTI7luGiDWlRGD65F8zLFZ+PJmbOa+wXdyfzkzBY2qLsOiIsF1Q6 O1/SSxy3b/LqdvSHy+WR8nDYCF584bWDy/j/j4j7SCPH8z+7mYsMJRBIVyuDLru5+YAg6Kiuidl bRHWAsgB3pck/6ro5rtELwf+CKo2JTmhl4eGUxfk3w+fwprzjq0sGtWmmh2CWAI8bTCeHslchsS 0820PKusXH1jKEoXuGPPk9raIjQkn4rMXmzKPzP8yr+LnALYDqeZPTSVPrIr5CHaGZJrcPcRIBw ILyHw/xzUb+5BSBaCAsaNgxReYtNOZmTIHd1vqzIJIBRfuxWIrKRG0FnRpqrMLsxBhMDiWNAmox 30cT6Nerb/GMU1Vp387lAS2Tu6ulxUeLGDkwsrX/5pio9OBT0yF5vFgv9C8usVpZ651Fg1ha9FK JDO0vTTPwncWfaB3KSO24ND6ui21ThfhsEwc37W2fTjGzvZP6rIeoJSQL00XIfoxOn X-Received: by 2002:a05:6122:9001:b0:5c6:7f44:b001 with SMTP id 71dfb90a1353d-5c680967056mr2104219e0c.0.1787899122940; Thu, 27 Aug 2026 23:38:42 -0700 (PDT) Received: from [192.168.100.153] ([2800:bf0:61:1127:ab87:5602:531c:8dfb]) by smtp.gmail.com with ESMTPSA id a1e0cc1a2514c-97e849d8494sm454195241.1.2026.08.27.23.38.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 27 Aug 2026 23:38:42 -0700 (PDT) From: Kurt Borja Date: Fri, 28 Aug 2026 01:38:17 -0500 Subject: [PATCH v4 02/10] dt-bindings: iio: adc: support the TI ADS126x ADC family Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Message-Id: <20260828-ads126x-v4-2-1dc27e9c0260@gmail.com> References: <20260828-ads126x-v4-0-1dc27e9c0260@gmail.com> In-Reply-To: <20260828-ads126x-v4-0-1dc27e9c0260@gmail.com> To: Kurt Borja , Jonathan Cameron , Rob Herring , Krzysztof Kozlowski , Conor Dooley , David Lechner Cc: =?utf-8?q?Nuno_S=C3=A1?= , Andy Shevchenko , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org X-Mailer: b4 0.15.2 X-Developer-Signature: v=1; a=openpgp-sha256; l=12770; i=kuurtb@gmail.com; h=from:subject:message-id; bh=DDo13wwLlYbjGc+vmoTMKrXc8Q3Ay18o6BblG/u9PbA=; b=owGbwMvMwCUmluBs8WX+lTTG02pJDFkTdd7sqJ1hvVd+1nN9pvPXmsoEpA4vq/xzR2pPcXxtk ejaP+xLO0pZGMS4GGTFFFnaExZ9exSV99bvQOh9mDmsTCBDGLg4BWAi75cz/E9T1Amct+/um/lu 6/rVc99f6DZyDvyZf/FRz0u21+6WfncZ/uk/61i/tlA6QFqx6ib32VcKOx/p7H30feWHyXwpsy7 UpHACAA== X-Developer-Key: i=kuurtb@gmail.com; a=openpgp; fpr=54D3BE170AEF777983C3C63B57E3B6585920A69A The ADS1262 and ADS1263 are 32-bit, 38.4-kSPS delta-sigma ADCs with an integrated PGA, internal reference, excitation and burn-out current sources for sensor biasing and diagnostics. The ADS1263 is compatible with ADS1262, but includes a second auxiliary ADC (ADC2) to perform main channel (ADC1) cross-checking measurements, system background measurements, or temperature compensation of the primary sensor. Both parts can configure per-channel voltage reference source, excitation current sources (IDAC), plus input and IDAC chopping for offset and IDAC mismatch cancellation. This lets the device drive and ratiometrically measure RTDs and other resistive sensors. Signed-off-by: Kurt Borja --- .../devicetree/bindings/iio/adc/ti,ads1262.yaml | 376 +++++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 382 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1262.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1262.yaml new file mode 100644 index 000000000000..7e26572388e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1262.yaml @@ -0,0 +1,376 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1262.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1262/ADS1263 analog to digital converter + +maintainers: + - Kurt Borja + +description: | + The ADS1262 and ADS1263 are 38.4-kSPS, delta-sigma (ΔΣ) ADCs with an + integrated PGA, reference, and internal fault monitors. The ADS1263 integrates + an auxiliary, 24-bit, ΔΣ ADC intended for background measurements. + + Datasheets: + - ADS126x: https://www.ti.com/lit/ds/symlink/ads1262.pdf + +properties: + compatible: + oneOf: + - const: ti,ads1262 + - items: + - const: ti,ads1263 + - const: ti,ads1262 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 8000000 + + spi-cpha: true + + interrupts: + minItems: 1 + maxItems: 2 + description: Data ready (DRDY) interrupt lines. + + interrupt-names: + description: + The data ready (DRDY) signal has two independent interrupt lines. A + dedicated DRDY pin and a pin shared with the serial interface MISO pin, + which is called DOUT/DRDY. + minItems: 1 + maxItems: 2 + items: + enum: [drdy, doutdrdy] + + start-gpios: + description: Start conversion control. + maxItems: 1 + + reset-gpios: + maxItems: 1 + + dvdd-supply: + description: Digital power supply. + + avdd-supply: + description: + Analog power supply. In bipolar supply configurations, the reported + voltage should be in reference to DGND. + + avss-supply: + description: + Negative analog power supply for bipolar configurations. AVSS can only be + at or below the ground reference (DGND). If not described, AVSS is assumed + to be connected to ground (0V). + + clocks: + maxItems: 1 + + '#io-channel-cells': + minimum: 1 + maximum: 2 + description: | + The first cell selects the channel by its reg. The second cell selects + between the main ADC (ADC1) and the auxiliary ADC (ADC2) as follows: + 0: ADC1 + 1: ADC2 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + regulators: + type: object + description: + List of regulators provided by this chip. + + properties: + vbias: + $ref: /schemas/regulator/regulator.yaml# + type: object + description: + Level-shift voltage output on the AINCOM pin. Its output is the + mid-voltage of the analog supply, (AVDD + AVSS) / 2, and is used to + shift floating sensors to within the ADC input range. + unevaluatedProperties: false + + refout: + $ref: /schemas/regulator/regulator.yaml# + type: object + description: + Buffered internal voltage reference output on the REFOUT pin. + unevaluatedProperties: false + + additionalProperties: false + +patternProperties: + "^ain([0-9]|com)-supply$": + description: + Common-mode voltage supply connected to AIN or AINCOM. + + "^refp[1-3]-supply$": + description: + Positive voltage reference connected to REFP1 (AIN0), REFP2 (AIN2) or + REFP3 (AIN4). If this regulator is not described and a channel selects + it as a reference source, then it's assumed to be connected to ground + (0V). + + "^refn[1-3]-supply$": + description: + Negative voltage reference connected to REFN1 (AIN1), REFN2 (AIN3) or + REFN3 (AIN5). If this regulator is not described and a channel selects + it as a reference source, then it's assumed to be connected to ground + (0V). + + "^ti,refp[1-3]-refn[1-3]-resistor-ohms$": + description: + Magnitude of the external reference resistor connected between REFP + and REFN. In ratiometric configurations, such as RTD measurements, the + IDAC excitation current returns through this resistor, generating the + reference voltage for the conversion. + + "^channel@[0-9a-f]+$": + $ref: /schemas/iio/adc/adc.yaml# + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + + single-channel: + minimum: 0 + maximum: 10 + + common-mode-channel: + minimum: 0 + maximum: 10 + default: 10 + + diff-channels: + items: + minimum: 0 + maximum: 10 + + input-chopping: true + + reference-sources: + minItems: 2 + description: + Indicates the reference sources for this channel. The first and second + items are the positive (REFP) and negative (REFN) sources of the main + ADC (ADC1). The third item is the reference source of the secondary + ADC (ADC2) and must always have a positive differential voltage. + items: + - enum: [internal-p, refp1, refp2, refp3, avdd] + - enum: [internal-n, refn1, refn2, refn3, avss] + - enum: [internal, refp1-refn1, refp2-refn2, refp3-refn3, avdd-avss] + + ti,reference-reversal: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the ADC1 (this has no effect on ADC2) reference voltage + for this channel has negative polarity and thus should be internally + reversed. + + excitation-channels: + minItems: 1 + maxItems: 2 + description: + Selects the pins for the IDAC sources from 0 (AIN0) to 10 (AINCOM). + The first value corresponds to IDAC1 and the second to IDAC2. + items: + minimum: 0 + maximum: 10 + + excitation-current-nanoamp: + minItems: 1 + maxItems: 2 + description: + The first value corresponds to IDAC1 and the second to IDAC2. + items: + enum: [50000, 100000, 250000, 500000, 750000, 1000000, 1500000, + 2000000, 2500000, 3000000] + + excitation-current-chopping: true + + burn-out-current-nanoamp: + description: + Selects current magnitude for the sensor bias current source. + enum: [500, 2000, 10000, 50000, 200000] + + ti,burn-out-resistor: + $ref: /schemas/types.yaml#/definitions/flag + description: + Instead of a fixed current, the sensor bias (burn-out) current source + can be pulled using an internal 10 MΩ resistor. + + ti,burn-out-polarity: + $ref: /schemas/types.yaml#/definitions/string + description: + The sensor bias can be configured to either pull-up or pull-down mode. + In pull-up mode, the current flows into the positive input and flows + out of the negative input. In pull-down mode, the polarities are + reversed. + enum: [pull-up, pull-down] + default: pull-up + + dependencies: + excitation-channels: [excitation-current-nanoamp] + excitation-current-nanoamp: [excitation-channels] + burn-out-current-nanoamp: + not: + required: + - ti,burn-out-resistor + + required: + - reg + + allOf: + - if: + properties: + excitation-channels: + maxItems: 1 + required: + - excitation-channels + then: + properties: + excitation-current-nanoamp: + maxItems: 1 + else: + properties: + excitation-current-nanoamp: + minItems: 2 + + oneOf: + - required: [single-channel] + - required: [diff-channels] + +dependencies: + interrupts: [interrupt-names] + interrupts-extended: [interrupt-names] + +required: + - compatible + - reg + - spi-cpha + - avdd-supply + - dvdd-supply + - '#address-cells' + - '#size-cells' + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: ti,ads1263 + then: + properties: + '#io-channel-cells': + minimum: 1 + maximum: 2 + patternProperties: + "^channel@[0-9]+$": + properties: + reference-sources: + minItems: 3 + maxItems: 3 + default: [internal-p, internal-n, internal] + else: + properties: + '#io-channel-cells': + const: 1 + patternProperties: + "^channel@[0-9]+$": + properties: + reference-sources: + minItems: 2 + maxItems: 2 + default: [internal-p, internal-n] + +unevaluatedProperties: false + +examples: + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads1262"; + reg = <0>; + spi-max-frequency = <8000000>; + spi-cpha; + avdd-supply = <&avdd>; + dvdd-supply = <&dvdd>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "drdy"; + + /* Typical common mode voltage configuration */ + aincom-supply = <&ads1262_vbias>; + + regulators { + ads1262_vbias: vbias { }; + }; + + channel@0 { + reg = <0>; + single-channel = <0>; + /* The VBIAS is enabled on pin 10 (AINCOM) */ + common-mode-channel = <10>; + }; + }; + }; + + - | + #include + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads1263", "ti,ads1262"; + reg = <0>; + spi-max-frequency = <8000000>; + spi-cpha; + avdd-supply = <&avdd>; + dvdd-supply = <&dvdd>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "drdy"; + + ti,refp2-refn2-resistor-ohms = <3520>; + + channel@0 { + reg = <0>; + diff-channels = <4 5>; + reference-sources = "refp2", "refn2", "refp2-refn2"; + excitation-channels = <1 6>; + excitation-current-nanoamp = <500000 500000>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index f3be900e5b9d..7593e33c5346 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27019,6 +27019,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml F: drivers/iio/adc/ti-ads1018.c +TI ADS1262 ADC DRIVER +M: Kurt Borja +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/adc/ti,ads1262.yaml + TI ADS7924 ADC DRIVER M: Hugo Villeneuve L: linux-iio@vger.kernel.org -- 2.55.0