[PATCH V1 2/2] arm64: dts: qcom: Set specified gear configuration for Hamoa

[Nitin Rawat <nitin.rawat@oss.qualcomm.com>]

Assign the appropriate UFS HS gear speed levels to each OPP frequency
entry in the device tree, enabling proper per-frequency gear
scaling (G1 at 75MHz, G3 at 150MHz, G5 at 300MHz).

Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index 8a96ea1bdb9c..ef7994c83bb7 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -3918,6 +3918,7 @@ opp-75000000 {
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>;
+					opp-level = <1>; /* HS-G1 */
 					required-opps = <&rpmhpd_opp_low_svs>;
 				};

@@ -3930,6 +3931,7 @@ opp-150000000 {
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>;
+					opp-level = <3>; /* HS-G3 */
 					required-opps = <&rpmhpd_opp_svs>;
 				};

@@ -3942,6 +3944,7 @@ opp-300000000 {
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>,
 						 /bits/ 64 <0>;
+					opp-level = <5>; /* HS-G5 */
 					required-opps = <&rpmhpd_opp_nom>;
 				};
 			};
--
2.34.1