[PATCH v1 1/1] arm64: dts: imx8mp-var-dart-sonata: Fix Sonata SD I/O supply

[Stefano Radaelli <stefano.radaelli21@gmail.com>]

From: Stefano Radaelli <stefano.r@variscite.com>

LDO5 powers the USDHC2 I/O rail on DART-MX8M-PLUS.
Without a regulator consumer, the kernel disables LDO5 during late init,
which removes the SD card and causes filesystem I/O errors.

Reference LDO5 as the Sonata USDHC2 VQMMC supply, so the regulator
remains enabled while the SD interface is active.

Co-developed-by: Luan Rafael Carneiro <luan.r@variscite.com>
Signed-off-by: Luan Rafael Carneiro <luan.r@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts
index 983d67a0c1de..7f78026e70ff 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-dart-sonata.dts
@@ -511,6 +511,7 @@ &usdhc2 {
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
-- 
2.47.3