On Thu, Sep 03, 2026 at 11:30:12PM +0200, Marek Vasut wrote:
> The Renesas R-Car Gen5 SoC contains multiple instances of DWC3 USB
> controller with glue logic wrapper around them. Document the glue
> logic and DWC3 controller.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> Cc: linux-usb@vger.kernel.org
> ---
> V2: Rework to use flat bindings for generic plat driver
> V3: - Support one or two PHYs to correctly describe the hardware
>     - Make maximum-speed optional
> V4: - Use ref: snps,dwc3-common.yaml and drop generic dr_mode/maximum-speed/phys/phy-names
>     - Switch to unevaluatedProperties: false
> V5: - Limit maximum PHY count to 2
> V6: No change
> V7: No change
> ---
>  .../bindings/usb/renesas,rcar-gen5-dwc3.yaml  | 76 +++++++++++++++++++
>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/renesas,rcar-gen5-dwc3.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/renesas,rcar-gen5-dwc3.yaml b/Documentation/devicetree/bindings/usb/renesas,rcar-gen5-dwc3.yaml
> new file mode 100644
> index 0000000000000..c8a770d7e0241
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/renesas,rcar-gen5-dwc3.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/renesas,rcar-gen5-dwc3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Gen5 DWC3 xHCI USB controller
> +
> +maintainers:
> +  - Marek Vasut <marek.vasut+renesas@mailbox.org>
> +
> +allOf:
> +  - $ref: snps,dwc3-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: renesas,r8a78000-dwc3
> +      - const: renesas,rcar-gen5-dwc3
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: dwc3
> +      - const: glue
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  phys:
> +    minItems: 1
> +    maxItems: 2
> +
> +  phy-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - interrupts
> +  - phys
> +  - phy-names
> +  - power-domains
> +  - resets
> +
> +unevaluatedProperties: false

I said this elsewhere today, but this binding has lots of "distasteful"
properties for things that should be determined from the compatible, so I
would appreciate it if you could use additionalProperties: false here
cite the ones you need to use explicitly. Sounds like dr_mode: true and
maximum-speed: true are all you'd need?

Cheers,
Conor.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    usb@c8800000 {
> +        compatible = "renesas,r8a78000-dwc3", "renesas,rcar-gen5-dwc3";
> +        reg = <0xc8800000 0x100000>, <0xc9c54000 0x2000>;
> +        reg-names = "dwc3", "glue";
> +        clocks = <&scmi_clk 336>;
> +        interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
> +        phys = <&usb30_phy>, <&mp_phy 2>;
> +        phy-names = "usb2-phy", "usb3-phy";
> +        power-domains = <&scmi_devpd 16>;
> +        resets = <&scmi_reset 336>;
> +    };
> -- 
> 2.53.0
>