On Thu, Sep 03, 2026 at 02:09:42PM -0600, James Hilliard wrote:
> From: Jernej Skrabec <jernej.skrabec@gmail.com>
> 
> Describe the AC200 audio codec and TV encoder as child nodes of the
> shared I2C register provider. Keep their analog supplies on the function
> consumers and describe the TV encoder display graph and optional bandgap
> calibration cell.
> 
> Add the shared interrupt-controller properties and interrupt numbers needed
> by the TV encoder. The Ethernet PHY remains represented on its primary MDIO
> bus and is therefore not an MFD child.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
> ---
>  .../devicetree/bindings/mfd/x-powers,ac200.yaml    | 136 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  include/dt-bindings/mfd/x-powers,ac200.h           |  13 ++
>  3 files changed, 150 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> index ca7a910b2c73..935dc07138cb 100644
> --- a/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> +++ b/Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
> @@ -28,15 +28,114 @@ properties:
>        be 24 or 27 MHz, matching the rates encoded by the documented EPHY clock
>        selector.
>  
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The shared open-drain INTB output for the TV encoder, Ethernet PHY and
> +      RTC interrupts.
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +    description:
> +      The interrupt number, as defined in
> +      include/dt-bindings/mfd/x-powers,ac200.h.
> +
> +  codec:
> +    type: object
> +    $ref: /schemas/sound/dai-common.yaml#
> +    unevaluatedProperties: false
> +
> +    properties:
> +      compatible:
> +        const: x-powers,ac200-codec
> +
> +      '#sound-dai-cells':
> +        const: 0
> +
> +      ac-ldoin-supply:
> +        description: The 3.3 V supply for the audio codec LDO input.
> +
> +    required:
> +      - compatible
> +      - '#sound-dai-cells'
> +      - ac-ldoin-supply
> +
> +  tv-encoder:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      compatible:
> +        const: x-powers,ac200-tve
> +
> +      interrupts:
> +        maxItems: 1
> +        description: Cable detection interrupt.

Given the example, this looks like a hack.
Is this mfd actually an interrupt controller, or is that just part of
this hack too?

Quite frankly, I am not really sure why either the tv-encoder or codec
have dedicated child nodes, they don't appear to have conflicting
properties.

Additionally, why is this not part of patch 1? Add the binding in a
complete state from the get-go. On that basis, at least,
pw-bot: changes-requested

Cheers,
Conor.

> +
> +      tv-vcc-supply:
> +        description: The 3.3 V supply for the composite-video DAC.
> +
> +      nvmem-cells:
> +        maxItems: 1
> +
> +      nvmem-cell-names:
> +        items:
> +          - const: bandgap
> +
> +      ports:
> +        $ref: /schemas/graph.yaml#/properties/ports
> +
> +        properties:
> +          port@0:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Input from the display pipeline, carrying CCIR656.
> +
> +          port@1:
> +            $ref: /schemas/graph.yaml#/properties/port
> +            description: Output to the composite-video connector.
> +
> +        required:
> +          - port@0
> +          - port@1
> +
> +    required:
> +      - compatible
> +      - interrupts
> +      - tv-vcc-supply
> +      - ports
> +
> +    dependencies:
> +      nvmem-cells: [ nvmem-cell-names ]
> +      nvmem-cell-names: [ nvmem-cells ]
> +
>  required:
>    - compatible
>    - reg
>    - clocks
>  
> +allOf:
> +  - if:
> +      required:
> +        - tv-encoder
> +    then:
> +      required:
> +        - interrupts
> +        - interrupt-controller
> +        - '#interrupt-cells'
> +
> +dependencies:
> +  interrupt-controller: [ '#interrupt-cells', interrupts ]
> +  '#interrupt-cells': [ interrupt-controller ]
> +
>  additionalProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/mfd/x-powers,ac200.h>
> +
>      i2c {
>          #address-cells = <1>;
>          #size-cells = <0>;
> @@ -45,6 +144,43 @@ examples:
>              compatible = "x-powers,ac200";
>              reg = <0x10>;
>              clocks = <&pwm 5>;
> +            interrupt-parent = <&pio>;
> +            interrupts = <1 20 IRQ_TYPE_LEVEL_LOW>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +
> +            codec {
> +                compatible = "x-powers,ac200-codec";
> +                #sound-dai-cells = <0>;
> +                ac-ldoin-supply = <&reg_aldo2>;
> +            };
> +
> +            tv-encoder {
> +                compatible = "x-powers,ac200-tve";
> +                interrupts = <AC200_IRQ_TVE>;
> +                tv-vcc-supply = <&reg_aldo2>;
> +
> +                ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                        reg = <0>;
> +
> +                        tve_in: endpoint {
> +                            remote-endpoint = <&tcon_out_tve>;
> +                        };
> +                    };
> +
> +                    port@1 {
> +                        reg = <1>;
> +
> +                        tve_out: endpoint {
> +                            remote-endpoint = <&composite_in>;
> +                        };
> +                    };
> +                };
> +            };
>          };
>      };
>  ...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1d03b0060bda..8a48f6a1e593 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -29511,6 +29511,7 @@ L:	linux-sunxi@lists.linux.dev
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
>  F:	drivers/mfd/ac200.c
> +F:	include/dt-bindings/mfd/x-powers,ac200.h
>  
>  X-POWERS AXP288 PMIC DRIVERS
>  M:	Hans de Goede <hansg@kernel.org>
> diff --git a/include/dt-bindings/mfd/x-powers,ac200.h b/include/dt-bindings/mfd/x-powers,ac200.h
> new file mode 100644
> index 000000000000..cc59e2ab4912
> --- /dev/null
> +++ b/include/dt-bindings/mfd/x-powers,ac200.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Interrupt numbers of the X-Powers AC200 interrupt controller.
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_X_POWERS_AC200_H
> +#define _DT_BINDINGS_MFD_X_POWERS_AC200_H
> +
> +#define AC200_IRQ_TVE			0
> +#define AC200_IRQ_EPHY			1
> +#define AC200_IRQ_RTC			2
> +
> +#endif /* _DT_BINDINGS_MFD_X_POWERS_AC200_H */
> 
> -- 
> 2.53.0
>