From: zjzhao <zjzhao@edatec.cn>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
devicetree@vger.kernel.org, zjzhao <zjzhao@edatec.cn>
Subject: [PATCH v3 2/2] dt-bindings: serial: Document WK2xxx SPI UART bindings
Date: Fri, 4 Sep 2026 18:52:43 +0800 [thread overview]
Message-ID: <20260904105243.120769-3-zjzhao@edatec.cn> (raw)
In-Reply-To: <20260904105243.120769-1-zjzhao@edatec.cn>
Add a DT binding for the WK2xxx SPI to UART bridge ICs (WK2124, WK2132,
WK2168, WK2202 and WK2204) from WKmic (Chengdu Weikai Microelectronics).
Each UART channel is described by a serial@N child node that carries its
own serial and RS-485 properties. Also register the wkmic vendor prefix.
Signed-off-by: zjzhao <zjzhao@edatec.cn>
---
.../bindings/serial/wkmic,wk2xxx.yaml | 115 ++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 117 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
diff --git a/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml b/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
new file mode 100644
index 000000000000..c781482c0f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/wkmic,wk2xxx.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/wkmic,wk2xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WKmic WK2xxx SPI to UART bridge
+
+maintainers:
+ - EDATEC Technology Co., Ltd. <zjzhao@edatec.cn>
+
+description:
+ The WK2xxx family (WK2124, WK2132, WK2168, WK2202 and WK2204) are SPI to
+ UART bridge ICs from WKmic (Chengdu Weikai Microelectronics). Each IC
+ exposes two or four full-duplex UART channels with 256-byte RX/TX FIFOs
+ through a single SPI slave interface and one interrupt line. Each channel
+ is described by a "serial@N" child node that carries its own serial and
+ RS-485 properties.
+
+properties:
+ compatible:
+ enum:
+ - wkmic,wk2124
+ - wkmic,wk2132
+ - wkmic,wk2168
+ - wkmic,wk2202
+ - wkmic,wk2204
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ When missing, the device driver uses polling instead.
+ maxItems: 1
+
+ clock-frequency:
+ description:
+ Crystal or external clock frequency for the IC in Hz. The WK2xxx has
+ no internal clock, so this must match the connected crystal.
+ default: 11059200
+ minimum: 1
+ maximum: 30000000
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^serial@[0-3]$":
+ type: object
+ description: A single UART channel of the chip.
+ allOf:
+ - $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/serial/rs485.yaml#
+ properties:
+ reg:
+ description: UART channel number on the chip.
+ maximum: 3
+ required:
+ - reg
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - wkmic,wk2132
+ - wkmic,wk2202
+ then:
+ patternProperties:
+ "^serial@[23]$": false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ compatible = "wkmic,wk2132";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ clock-frequency = <11059200>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ serial@0 {
+ reg = <0>;
+ };
+
+ serial@1 {
+ reg = <1>;
+ rs485-rts-active-low;
+ linux,rs485-enabled-at-boot-time;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ba2002969373..654fc8525559 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1907,6 +1907,8 @@ patternProperties:
description: Wireless Tag (qiming yunduan)
"^wits,.*":
description: Shenzhen Merrii Technology Co., Ltd. (WITS)
+ "^wkmic,.*":
+ description: Chengdu Weikai Microelectronics Co., Ltd.
"^wlf,.*":
description: Wolfson Microelectronics
"^wm,.*":
--
2.43.0
next prev parent reply other threads:[~2026-09-04 10:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 7:20 [PATCH 0/2] WK2xxx SPI to UART bridge driver zjzhao
2026-09-04 7:20 ` [PATCH 1/2] serial: wk2xxx: Add WK2xxx SPI UART driver zjzhao
2026-09-04 7:35 ` sashiko-bot
2026-09-04 8:17 ` Jiri Slaby
2026-09-04 9:32 ` zjzhao
2026-09-04 7:20 ` [PATCH 2/2] dt-bindings: serial: Document WK2xxx SPI UART bindings zjzhao
2026-09-04 7:28 ` sashiko-bot
2026-09-04 9:33 ` [PATCH v2 0/2] WK2xxx SPI to UART bridge driver zjzhao
2026-09-04 9:33 ` [PATCH v2 1/2] serial: wk2xxx: Add WK2xxx SPI UART driver zjzhao
2026-09-04 9:53 ` sashiko-bot
2026-09-04 9:33 ` [PATCH v2 2/2] dt-bindings: serial: Document WK2xxx SPI UART bindings zjzhao
2026-09-04 9:40 ` sashiko-bot
2026-09-05 7:31 ` Krzysztof Kozlowski
2026-09-04 10:52 ` [PATCH v3 0/2] WK2xxx SPI to UART bridge driver zjzhao
2026-09-04 10:52 ` [PATCH v3 1/2] serial: wk2xxx: Add WK2xxx SPI UART driver zjzhao
2026-09-04 11:10 ` sashiko-bot
2026-09-04 10:52 ` zjzhao [this message]
2026-09-04 11:12 ` [PATCH v3 2/2] dt-bindings: serial: Document WK2xxx SPI UART bindings sashiko-bot
2026-09-04 15:28 ` Conor Dooley
2026-09-05 7:32 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260904105243.120769-3-zjzhao@edatec.cn \
--to=zjzhao@edatec.cn \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox