[PATCH v3 06/10] arm64: dts: qcom: ipq6018: move DR mode to board DTS

[George Moussalem via B4 Relay <devnull+george.moussalem.outlook.com@kernel.org>]

From: George Moussalem <george.moussalem@outlook.com>

The controller is DRD capable, but it's currently set to host mode in
the SoC dtsi. Unset it in the SoC dtsi and set it as host mode in the
cp01-c1 board DTS file.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi        | 2 --
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 9c69d3027b43..a366be17c251 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -48,6 +48,10 @@ flash@0 {
 	};
 };
 
+&dwc_1 {
+	dr_mode = "host";
+};
+
 &tlmm {
 	i2c_1_pins: i2c-1-state {
 		pins = "gpio42", "gpio43";
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 0701517275d4..c02110ad9cb0 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -460,7 +460,6 @@ dwc_1: usb@7000000 {
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
 			};
 		};
 
@@ -716,7 +715,6 @@ dwc_0: usb@8a00000 {
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
 			};
 		};
 

-- 
2.53.0