From: Jia Wang <wangjia@ultrarisc.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jose Abreu <joabreu@synopsys.com>,
Chen Wang <chen.wang@linux.dev>,
Inochi Amaoto <inochiama@gmail.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
Jia Wang <wangjia@ultrarisc.com>,
sophgo@lists.linux.dev,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH net-next v2 0/5] net: stmmac: Add common RGMII delay handling and DP1000 support
Date: Mon, 07 Sep 2026 15:46:49 +0800 [thread overview]
Message-ID: <20260907-dwmac-ultrarisc-v2-0-9a39bf8db313@ultrarisc.com> (raw)
The UltraRISC DP1000 integrates a Synopsys DesignWare GMAC from the 5.20
series with fixed internal delays on both TX and RX RGMII clock paths.
For boards without PCB delays, "rgmii-id" describes the link. Passing this
mode unchanged to the PHY would enable another pair of delays and break
RGMII timing.
Add TX and RX internal-delay capability flags to the common stmmac platform
data and adjust the PHY interface mode in stmmac_pltfr_probe(). Convert the
Sophgo and EIC7700 glue drivers to this common handling, then add the DP1000
binding and glue driver. The DP1000 glue driver only declares both delay
capabilities.
Tested with:
1. dt_binding_check and dtbs_check.
2. RISC-V build with CONFIG_DWMAC_ULTRARISC=m.
3. Runtime validation on Shenzhen Rongda M0 with a YT8531S PHY and
Milk-V Titan with an RTL8211F PHY: ultrarisc-dwmac binds and
establishes a 1000 Mb/s full-duplex link on both boards.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
---
Changes in v2:
- Fold the snps,dwmac compatible-list update into the DP1000 binding patch.
- Add common stmmac capability flags for MAC-provided RGMII delays.
- Convert Sophgo and EIC7700 to the common RGMII delay handling.
- Simplify the DP1000 glue driver to declare its TX and RX delay
capabilities.
- Add Conor Dooley's Reviewed-by tag to the DP1000 binding patch.
- Link to v1: https://patch.msgid.link/20260901-dwmac-ultrarisc-v1-0-f19454814bcf@ultrarisc.com
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: "David S. Miller" <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Jia Wang <wangjia@ultrarisc.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>
To: Jose Abreu <joabreu@synopsys.com>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: Chen Wang <chen.wang@linux.dev>
To: Inochi Amaoto <inochiama@gmail.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: sophgo@lists.linux.dev
---
Jia Wang (5):
net: stmmac: Add common internal RGMII delay handling
net: stmmac: sophgo: Use common RGMII delay handling
net: stmmac: eic7700: Use common RGMII delay handling
dt-bindings: net: Add UltraRISC DP1000 GMAC
net: stmmac: Add UltraRISC DP1000 GMAC support
.../devicetree/bindings/net/snps,dwmac.yaml | 1 +
.../bindings/net/ultrarisc,dp1000-gmac.yaml | 74 ++++++++++++++++++++++
MAINTAINERS | 6 ++
drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-eic7700.c | 13 +---
drivers/net/ethernet/stmicro/stmmac/dwmac-sophgo.c | 12 ++--
.../net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c | 52 +++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 11 ++++
include/linux/stmmac.h | 2 +
10 files changed, 164 insertions(+), 19 deletions(-)
---
base-commit: df2908090cda368b01ff43709f51890076c56157
change-id: 20260827-dwmac-ultrarisc-7c79f2f80fd1
Best regards,
--
Jia Wang <wangjia@ultrarisc.com>
next reply other threads:[~2026-09-07 7:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-07 7:46 Jia Wang [this message]
2026-09-07 7:46 ` [PATCH net-next v2 1/5] net: stmmac: Add common internal RGMII delay handling Jia Wang
2026-09-07 11:44 ` Maxime Chevallier
2026-09-07 7:46 ` [PATCH net-next v2 2/5] net: stmmac: sophgo: Use common " Jia Wang
2026-09-07 11:45 ` Maxime Chevallier
2026-09-07 7:46 ` [PATCH net-next v2 3/5] net: stmmac: eic7700: " Jia Wang
2026-09-07 11:46 ` Maxime Chevallier
2026-09-07 7:46 ` [PATCH net-next v2 4/5] dt-bindings: net: Add UltraRISC DP1000 GMAC Jia Wang
2026-09-07 7:46 ` [PATCH net-next v2 5/5] net: stmmac: Add UltraRISC DP1000 GMAC support Jia Wang
2026-09-07 11:48 ` Maxime Chevallier
2026-09-10 8:50 ` [PATCH net-next v2 0/5] net: stmmac: Add common RGMII delay handling and DP1000 support patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907-dwmac-ultrarisc-v2-0-9a39bf8db313@ultrarisc.com \
--to=wangjia@ultrarisc.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=chen.wang@linux.dev \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=inochiama@gmail.com \
--cc=joabreu@synopsys.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=robh@kernel.org \
--cc=sophgo@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox