From: Amin Gattout <amin.gattout@gmail.com>
To: Mehdi Djait <mehdi.djait@linux.intel.com>,
Michael Riesch <michael.riesch@collabora.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org,
Amin Gattout <amin.gattout@gmail.com>
Subject: [PATCH 1/3] media: dt-bindings: add rockchip rk3576 vicap
Date: Tue, 15 Sep 2026 14:27:56 +0200 [thread overview]
Message-ID: <20260915-vicap-rk3576-v1-1-d3f5eb58a0b5@gmail.com> (raw)
In-Reply-To: <20260915-vicap-rk3576-v1-0-d3f5eb58a0b5@gmail.com>
Add the compatible for the Video Capture (VICAP) unit of the Rockchip
RK3576. This variant features five MIPI CSI-2 ports and a connection
to the image signal processor (ISP). The pixel clock of each MIPI port
enters the VICAP through a dedicated gate in the clock and reset unit,
so the variant takes five interface clocks and five interface resets
in addition to the aclk, hclk and dclk of the other variants.
Signed-off-by: Amin Gattout <amin.gattout@gmail.com>
---
.../bindings/media/rockchip,rk3568-vicap.yaml | 46 +++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml
index 080b64503b1b..b7dfaf3b378d 100644
--- a/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml
@@ -15,6 +15,10 @@ description:
the data from camera sensors, video decoders, or other companion ICs and
transfers it into system main memory by AXI bus.
+ The Rockchip RK3576 Video Capture (VICAP) is similar to its RK3568
+ counterpart, but features five MIPI CSI-2 ports and an additional
+ connection to the image signal processor (ISP) block.
+
The Rockchip RK3588 Video Capture (VICAP) is similar to its RK3568
counterpart, but features six MIPI CSI-2 ports and additional connections
to the image signal processor (ISP) blocks.
@@ -23,6 +27,7 @@ properties:
compatible:
enum:
- rockchip,rk3568-vicap
+ - rockchip,rk3576-vicap
- rockchip,rk3588-vicap
reg:
@@ -33,7 +38,7 @@ properties:
clocks:
minItems: 4
- maxItems: 5
+ maxItems: 8
clock-names:
items:
@@ -42,6 +47,9 @@ properties:
- const: dclk
- const: iclk
- const: iclk1
+ - const: iclk2
+ - const: iclk3
+ - const: iclk4
minItems: 4
iommus:
@@ -221,6 +229,40 @@ allOf:
port@11: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3576-vicap
+ then:
+ properties:
+ clocks:
+ minItems: 8
+
+ clock-names:
+ minItems: 8
+
+ resets:
+ minItems: 8
+ maxItems: 8
+
+ reset-names:
+ items:
+ - const: arst
+ - const: hrst
+ - const: drst
+ - const: irst0
+ - const: irst1
+ - const: irst2
+ - const: irst3
+ - const: irst4
+
+ ports:
+ properties:
+ port@6: false
+
+ port@11: false
+
- if:
properties:
compatible:
@@ -230,9 +272,11 @@ allOf:
properties:
clocks:
minItems: 5
+ maxItems: 5
clock-names:
minItems: 5
+ maxItems: 5
resets:
minItems: 9
--
2.43.0
next prev parent reply other threads:[~2026-09-15 12:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 12:27 [PATCH 0/3] media: rockchip: add support for the RK3576 Video Capture unit Amin Gattout
2026-09-15 12:27 ` Amin Gattout [this message]
2026-09-15 16:31 ` [PATCH 1/3] media: dt-bindings: add rockchip rk3576 vicap Conor Dooley
2026-09-18 21:21 ` Michael Riesch
2026-09-15 12:27 ` [PATCH 2/3] media: rockchip: rkcif: add support for rk3576 vicap mipi capture Amin Gattout
2026-09-18 21:10 ` Michael Riesch
2026-09-15 12:27 ` [PATCH 3/3] arm64: dts: rockchip: add vicap node to rk3576 Amin Gattout
2026-09-18 21:20 ` Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260915-vicap-rk3576-v1-1-d3f5eb58a0b5@gmail.com \
--to=amin.gattout@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=mehdi.djait@linux.intel.com \
--cc=michael.riesch@collabora.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox