From: sashiko-bot@kernel.org
To: "Eliav Farber" <farbere@amazon.com>
Cc: robh@kernel.org, devicetree@vger.kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v3 1/3] pps: clients: gpio: propagate probe error codes
Date: Thu, 17 Sep 2026 08:04:28 +0000 [thread overview]
Message-ID: <20260917080428.B82151F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260917075611.47881-2-farbere@amazon.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] pps: log spam on deferred probe due to dev_err()
--
commit 7ffb1c8320d0b6933d1ffc7e8877c00811256618
Author: Eliav Farber <farbere@amazon.com>
pps: clients: gpio: propagate probe error codes
On the two probe error paths that map and request the interrupt, probe
overwrote the error from gpiod_to_irq() and request_threaded_irq() with a
hardcoded -EINVAL, hiding meaningful codes such as -EBUSY, -ENOMEM or
-EPROBE_DEFER from the caller. The request_threaded_irq() failure message
also logged the IRQ number but not the errno.
> diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
> index 73ec2c7335e51..038c55c5f7d4a 100644
> --- a/drivers/pps/clients/pps-gpio.c
> +++ b/drivers/pps/clients/pps-gpio.c
> @@ -165,7 +165,7 @@ static int pps_gpio_probe(struct platform_device *pdev)
> ret = gpiod_to_irq(data->gpio_pin);
> if (ret < 0) {
> dev_err(dev, "failed to map GPIO to IRQ: %d\n", ret);
> - return -EINVAL;
> + return ret;
[Severity: Low]
Does propagating `ret` here risk console log spam if `-EPROBE_DEFER` is
returned? Since `dev_err()` is used unconditionally, it could cause log spam
during system boot if probe deferrals happen repeatedly.
Would `dev_err_probe()` be more appropriate to handle deferred probes
silently?
> }
> data->irq = ret;
>
> @@ -197,8 +197,8 @@ static int pps_gpio_probe(struct platform_device *pdev)
> data->info.name, data);
> if (ret) {
> pps_unregister_source(data->pps);
> - dev_err(dev, "failed to acquire IRQ %d\n", data->irq);
> - return -EINVAL;
> + dev_err(dev, "failed to acquire IRQ %d: %d\n", data->irq, ret);
> + return ret;
[Severity: Low]
Similarly, does propagating the real error here risk logging spam on
deferred probes? Repeatedly deferring could trigger this `dev_err()`
multiple times.
Would `dev_err_probe()` be more appropriate here as well?
> }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260917075611.47881-1-farbere@amazon.com?part=1
next prev parent reply other threads:[~2026-09-17 8:04 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 13:47 [PATCH 0/2] pps-gpio: restore pin mux on unbind and shutdown Eliav Farber
2026-09-16 13:47 ` [PATCH 1/2] dt-bindings: pps: pps-gpio: document optional idle pinctrl state Eliav Farber
2026-09-16 13:47 ` [PATCH 2/2] pps: clients: gpio: release pins to idle state on remove and shutdown Eliav Farber
2026-09-16 13:57 ` sashiko-bot
2026-09-16 16:48 ` [PATCH 0/2] pps-gpio: restore pin mux on unbind " Rodolfo Giometti
2026-09-16 18:25 ` Farber, Eliav
2026-09-16 18:26 ` [PATCH v2 " Eliav Farber
2026-09-16 18:26 ` [PATCH v2 1/2] dt-bindings: pps: pps-gpio: document optional pinctrl states Eliav Farber
2026-09-17 7:13 ` Rodolfo Giometti
2026-09-17 7:48 ` Farber, Eliav
2026-09-16 18:26 ` [PATCH v2 2/2] pps: clients: gpio: release pins to an inactive state on remove and shutdown Eliav Farber
2026-09-16 18:43 ` sashiko-bot
2026-09-17 7:14 ` Rodolfo Giometti
2026-09-17 7:52 ` Farber, Eliav
2026-09-17 7:56 ` [PATCH v3 0/3] pps-gpio: restore pin mux on unbind " Eliav Farber
2026-09-17 7:56 ` [PATCH v3 1/3] pps: clients: gpio: propagate probe error codes Eliav Farber
2026-09-17 8:04 ` sashiko-bot [this message]
2026-09-17 9:58 ` Bartosz Golaszewski
2026-09-18 7:50 ` Rodolfo Giometti
2026-09-17 7:56 ` [PATCH v3 2/3] dt-bindings: pps: pps-gpio: document optional pinctrl states Eliav Farber
2026-09-17 15:35 ` Rob Herring (Arm)
2026-09-17 16:13 ` Rob Herring
2026-09-18 7:50 ` Rodolfo Giometti
2026-09-18 15:43 ` Rob Herring
2026-09-17 7:56 ` [PATCH v3 3/3] pps: clients: gpio: release pins to an inactive state on remove and shutdown Eliav Farber
2026-09-17 8:10 ` sashiko-bot
2026-09-19 17:11 ` [PATCH v4 0/3] pps-gpio: restore pin mux on unbind " Eliav Farber
2026-09-22 7:40 ` Rodolfo Giometti
2026-09-22 10:08 ` Farber, Eliav
2026-09-22 10:30 ` [PATCH v5 0/4] " Eliav Farber
2026-09-22 10:30 ` [PATCH v5 1/4] pps: clients: gpio: propagate probe error codes Eliav Farber
2026-09-22 10:30 ` [PATCH v5 2/4] pps: clients: gpio: only tear down the echo timer when it exists Eliav Farber
2026-09-22 10:30 ` [PATCH v5 3/4] dt-bindings: pps: pps-gpio: document optional pinctrl states Eliav Farber
2026-09-22 12:46 ` Rodolfo Giometti
2026-09-23 12:36 ` Rob Herring
2026-09-23 13:13 ` Farber, Eliav
2026-09-23 18:04 ` Rob Herring
2026-09-22 10:30 ` [PATCH v5 4/4] pps: clients: gpio: release pins to an inactive state on remove and shutdown Eliav Farber
2026-09-22 10:39 ` sashiko-bot
2026-09-22 12:46 ` Rodolfo Giometti
2026-09-22 14:55 ` Farber, Eliav
2026-09-23 7:50 ` Rodolfo Giometti
2026-09-23 18:22 ` [PATCH v6 0/4] pps-gpio: restore pin mux on unbind " Eliav Farber
2026-09-23 18:22 ` [PATCH v6 1/4] pps: clients: gpio: propagate probe error codes Eliav Farber
2026-09-24 12:58 ` Rodolfo Giometti
2026-09-24 14:46 ` Bartosz Golaszewski
2026-09-23 18:22 ` [PATCH v6 2/4] pps: clients: gpio: only tear down the echo timer when it exists Eliav Farber
2026-09-24 12:59 ` Rodolfo Giometti
2026-09-24 14:47 ` Bartosz Golaszewski
2026-09-23 18:22 ` [PATCH v6 3/4] dt-bindings: pps: pps-gpio: document optional pinctrl states Eliav Farber
2026-09-23 18:41 ` Rob Herring
2026-09-24 12:59 ` Rodolfo Giometti
2026-09-23 18:22 ` [PATCH v6 4/4] pps: clients: gpio: release pins to an inactive state on remove and shutdown Eliav Farber
2026-09-24 12:59 ` Rodolfo Giometti
2026-10-01 7:53 ` Linus Walleij
2026-09-24 12:58 ` [PATCH v6 0/4] pps-gpio: restore pin mux on unbind " Rodolfo Giometti
2026-09-19 17:11 ` [PATCH v4 1/3] pps: clients: gpio: propagate probe error codes Eliav Farber
2026-09-22 7:40 ` Rodolfo Giometti
2026-09-22 8:08 ` Farber, Eliav
2026-09-22 8:22 ` Rodolfo Giometti
2026-09-22 10:06 ` Farber, Eliav
2026-09-19 17:11 ` [PATCH v4 2/3] dt-bindings: pps: pps-gpio: document optional pinctrl states Eliav Farber
2026-09-22 7:40 ` Rodolfo Giometti
2026-09-22 10:11 ` Farber, Eliav
2026-09-19 17:11 ` [PATCH v4 3/3] pps: clients: gpio: release pins to an inactive state on remove and shutdown Eliav Farber
2026-09-22 7:40 ` Rodolfo Giometti
2026-09-22 10:13 ` Farber, Eliav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260917080428.B82151F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=farbere@amazon.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox