From: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
To: Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Subject: [PATCH 2/4] arm64: dts: qcom: nord: Add iris video node
Date: Sat, 19 Sep 2026 10:14:56 +0530 [thread overview]
Message-ID: <20260919-nord-iris-v1-2-94428761ec06@oss.qualcomm.com> (raw)
In-Reply-To: <20260919-nord-iris-v1-0-94428761ec06@oss.qualcomm.com>
Add iris video codec to nord SoC, which comes with significantly different
powering up sequence than previous platforms, thus different clocks and
resets.
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/nord-embedded.dtsi | 114 ++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
index 74f4e6be8652..03f827f3e5fc 100644
--- a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
+++ b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
@@ -1428,6 +1428,120 @@ camcc: clock-controller@9ce0000 {
#power-domain-cells = <1>;
};
+ iris: video-codec@aa00000 {
+ compatible = "qcom,nord-iris", "qcom,glymur-iris";
+ reg = <0x0 0x0aa00000 0x0 0xf0000>;
+
+ clocks = <&nwgcc NW_GCC_VIDEO_AXI0_CLK>,
+ <&videocc VIDEO_CC_MVS0C_CLK>,
+ <&videocc VIDEO_CC_MVS0_CLK>,
+ <&nwgcc NW_GCC_VIDEO_AXI0C_CLK>,
+ <&videocc VIDEO_CC_MVS0C_FREERUN_CLK>,
+ <&videocc VIDEO_CC_MVS0_FREERUN_CLK>,
+ <&nwgcc NW_GCC_VIDEO_AXI1_CLK>,
+ <&videocc VIDEO_CC_MVS1_CLK>,
+ <&videocc VIDEO_CC_MVS1_FREERUN_CLK>;
+ clock-names = "core_iface",
+ "core",
+ "vcodec0_core",
+ "vcodec0_iface",
+ "core_freerun",
+ "vcodec0_core_freerun",
+ "vcodec1_iface",
+ "vcodec1_core",
+ "vcodec1_core_freerun";
+
+ dma-coherent;
+
+ interconnects = <&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_VIDEO_MVP0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "cpu-cfg",
+ "video-mem";
+
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ memory-region = <&video_mem>;
+
+ operating-points-v2 = <&iris_opp_table>;
+
+ power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+ <&videocc VIDEO_CC_MVS0_GDSC>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_MMCX>,
+ <&videocc VIDEO_CC_MVS1_GDSC>;
+ power-domain-names = "venus",
+ "vcodec0",
+ "mxc",
+ "mmcx",
+ "vcodec1";
+
+ resets = <&nwgcc NW_GCC_VIDEO_AXI0_CLK_ARES>,
+ <&nwgcc NW_GCC_VIDEO_AXI0C_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS0C_FREERUN_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS0_FREERUN_CLK_ARES>,
+ <&nwgcc NW_GCC_VIDEO_AXI1_CLK_ARES>,
+ <&videocc VIDEO_CC_MVS1_FREERUN_CLK_ARES>;
+ reset-names = "core_bus",
+ "vcodec0_bus",
+ "core",
+ "vcodec0_core",
+ "vcodec1_bus",
+ "vcodec1_core";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x0 0x0 0x0 0xffe00000>;
+
+ status = "disabled";
+
+ non-pixel {
+ iommus = <&apps_smmu_1 0x0940 0x20>,
+ <&apps_smmu_1 0x0944 0x0>,
+ <&apps_smmu_1 0x0960 0x20>;
+ iommu-ranges = <0x25800000 0xda600000>;
+ };
+
+ pixel {
+ iommus = <&apps_smmu_1 0x0943 0x0>;
+ };
+
+ iris_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-240000000 {
+ opp-hz = /bits/ 64 <240000000 240000000 360000000>;
+ required-opps = <&rpmhpd_opp_svs>,
+ <&rpmhpd_opp_svs>;
+ };
+
+ opp-435000000 {
+ opp-hz = /bits/ 64 <435000000 435000000 652500000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000 480000000 720000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_nom>;
+ };
+
+ opp-533333333 {
+ opp-hz = /bits/ 64 <533333333 533333333 800000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>,
+ <&rpmhpd_opp_turbo>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000 560000000 840000000>;
+ required-opps = <&rpmhpd_opp_nom>,
+ <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
videocc: clock-controller@aaf0000 {
compatible = "qcom,nord-videocc";
reg = <0x0 0x0aaf0000 0x0 0x10000>;
--
2.34.1
next prev parent reply other threads:[~2026-09-19 4:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-19 4:44 [PATCH 0/4] media: iris: Add support for nord platform Vishnu Reddy
2026-09-19 4:44 ` [PATCH 1/4] dt-bindings: media: qcom,nord-iris: Add nord video codec Vishnu Reddy
2026-09-20 13:08 ` Shawn Guo
2026-09-21 5:39 ` Vishnu Reddy
2026-09-19 4:44 ` Vishnu Reddy [this message]
2026-09-20 13:16 ` [PATCH 2/4] arm64: dts: qcom: nord: Add iris video node Shawn Guo
2026-09-21 5:40 ` Vishnu Reddy
2026-09-19 4:44 ` [PATCH 3/4] arm64: dts: qcom: nord-ride-embedded: Enable iris video codec node Vishnu Reddy
2026-09-21 8:07 ` Abel Vesa
2026-09-25 9:56 ` Gourav Kumar
2026-09-19 4:44 ` [PATCH 4/4] arm64: dts: qcom: nord-rrd: " Vishnu Reddy
2026-09-21 8:07 ` Abel Vesa
2026-09-25 9:57 ` Gourav Kumar
2026-09-20 13:27 ` [PATCH 0/4] media: iris: Add support for nord platform Shawn Guo
2026-09-21 5:45 ` Vishnu Reddy
2026-09-23 13:47 ` Shawn Guo
2026-09-24 6:22 ` Vishnu Reddy
2026-09-24 7:09 ` Shawn Guo
2026-09-25 9:53 ` Gourav Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260919-nord-iris-v1-2-94428761ec06@oss.qualcomm.com \
--to=busanna.reddy@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=abhinav.kumar@linux.dev \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox