[PATCH 1/2] dt-bindings: display: faraday,tve200: Use a level-high interrupt

[Linus Walleij <linusw@kernel.org>]

The TVE200 vertical interrupt can remain pending after acknowledgment.
Using rising-edge triggering can leave it unserviced when no new edge
is generated, causing vblank and page-flip timeouts on the D-Link DIR-685.

Use level-high triggering in the binding example so a pending interrupt
is delivered again without requiring a new edge.

Fixes: 8b17e80d9e46 ("drm/tve200: Add DT bindings")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 Documentation/devicetree/bindings/display/faraday,tve200.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
index b09628b69177..43dbe2778d6b 100644
--- a/Documentation/devicetree/bindings/display/faraday,tve200.yaml
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -54,7 +54,7 @@ examples:
     display-controller@6a000000 {
       compatible = "faraday,tve200";
       reg = <0x6a000000 0x1000>;
-      interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+      interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
       resets = <&syscon GEMINI_RESET_TVC>;
       clocks = <&syscon GEMINI_CLK_GATE_TVC>,
                <&syscon GEMINI_CLK_TVC>;

-- 
2.55.0