[PATCH v3 0/4] Add SRAM Nodes for VPU

[Brandon Brnich <b-brnich@ti.com>]

Hello All,

This series is responsible for adding the SRAM nodes for the Wave5 VPU to
use. First patch is responsible for carving out the SRAM pool from
main_navss that the VPU on J721s2 will then reference.

The last 2 patches use the existing oc_sram pool already found in the
relevant device trees.


Changes since v2:

  - Removed j784s4 since there are two vpu instances, need to find
    another SRAM pool so both can get full benefit of B/W savings

Changes since v1:

  - properly updates the nodename in the first two patches to pass
    dtbs_check. 

Best,
Brandon

Brandon Brnich (4):
  arm64: dts: ti: k3-j721s2-main: Add mmio-sram node to main_navss
  arm64: dts: ti: k3-j721s2-main: Assign SRAM to VPU node
  arm64: dts: ti: k3-am62a-main: Assign SRAM to VPU node
  arm64: dts: ti: k3-am62p-j722s-common-main: Assign SRAM to VPU node

 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi              | 1 +
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 1 +
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi             | 9 +++++++++
 3 files changed, 11 insertions(+)

-- 
2.43.0