[PATCH v1 07/27] dt-bindings: gpu: mali-valhall-csf: Add Mali Gen5 AM compatible

[Karunika Choo <karunika.choo@arm.com>]

Add the generic "arm,mali-gen5-am" compatible for Mali Gen5 AM GPU
integrations.

Mali Gen5 AM systems use the external AM_GOVERNOR block for frequency
scaling, so OPP, cooling and local GPU supply properties are not valid
for this compatible.

Add a matching example node.

Signed-off-by: Karunika Choo <karunika.choo@arm.com>
---
 .../bindings/gpu/arm,mali-valhall-csf.yaml    | 26 ++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
index 8eccd4338a2b2..a1e85570b4b3b 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
@@ -22,6 +22,7 @@ properties:
               - nxp,imx95-mali            # G310
               - rockchip,rk3588-mali
           - const: arm,mali-valhall-csf   # Mali Valhall GPU model/revision is fully discoverable
+      - const: arm,mali-gen5-am
 
   reg:
     maxItems: 1
@@ -146,6 +147,19 @@ allOf:
         - nvmem-cells
         - nvmem-cell-names
         - power-domains
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,mali-gen5-am
+    then:
+      properties:
+        mali-supply: false
+        sram-supply: false
+        operating-points-v2: false
+        opp-table: false
+        "#cooling-cells": false
+        dynamic-power-coefficient: false
 
 examples:
   - |
@@ -195,5 +209,15 @@ examples:
         nvmem-cell-names = "shader-present";
         power-domains = <&gpufreq>;
     };
-
+  - |
+    gpu@100000 {
+        compatible = "arm,mali-gen5-am";
+        reg = <0x100000 0x480000>;
+        interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        clocks = <&gpu_clock 0>, <&gpu_clock 1>, <&gpu_clock 2>;
+        clock-names = "core", "coregroup", "stacks";
+    };
 ...
-- 
2.43.0