On Thu, Sep 24, 2026 at 03:50:46PM +0800, Kyle Switch wrote:
> Motorcomm YT8824 Ethernet PHY is PHY package of 4 PHY-s.
> 
> Signed-off-by: Kyle Switch <kyle.switch@motor-comm.com>
> ---
>  .../bindings/net/motorcomm,yt8824.yaml        | 69 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +
>  2 files changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8824.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8824.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8824.yaml
> new file mode 100644
> index 000000000000..fd62b309e7ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8824.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/motorcomm,yt8824.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MotorComm YT8824 Ethernet PHY
> +
> +maintainers:
> +  - Kyle Switch <kyle.switch@motor-comm.com>
> +
> +description:
> +  Motorcomm YT8824 Ethernet PHY is a PHY package of 4 PHYs.
> +
> +$ref: ethernet-phy-package.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - motorcomm,yt8824-package
> +  phy-mode:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    enum: [ internal, 10g-qxgmii ]

This should be after ref, but also have a vendor prefix.
Additionally, the qcom ethernet-phy-package user also has a mode
property. Net folks, should this be made common?

> +  reg:
> +    description:
> +      The absolute MDIO address of the YT8824 shared top extend
> +      register block.
> +      For internal mode, this is fixed at 9;
> +      For external mode it is (base MDIO address of the four
> +      member PHYs) + 4.
> +      Note that this is NOT the base ID of the first member PHY.
> +required:

Please use blank lines between properties and other elements of the
binding.


> +  - compatible
> +  - phy-mode
> +  - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ethernet-phy-package@9 {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            compatible = "motorcomm,yt8824-package";
> +            reg = <9>;
> +
> +            phy-mode = "internal";
> +
> +            ethernet-phy@4 {
> +                reg = <4>;
> +            };
> +
> +            ethernet-phy@5 {
> +                reg = <5>;
> +            };
> +
> +            ethernet-phy@6 {
> +                reg = <6>;
> +            };
> +
> +            ethernet-phy@7 {
> +                reg = <7>;
> +            };

Unless the addresses and numbers of phys are entirely unconstrained, I
think you should add some pattern properties for them.

Thanks,
Conor.

> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e3ce77c839b0..ed7af1bd9521 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18409,8 +18409,10 @@ F:	drivers/net/ethernet/stmicro/stmmac/dwmac-motorcomm.c
>  
>  MOTORCOMM PHY DRIVER
>  M:	Frank <Frank.Sae@motor-comm.com>
> +M:	Kyle Switch <kyle.switch@motor-comm.com>
>  L:	netdev@vger.kernel.org
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/net/motorcomm,yt8824.yaml
>  F:	Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
>  F:	drivers/net/phy/motorcomm.c
>  
> -- 
> 2.25.1
>